• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.6
• /
• pp.621-633
• /
• 1987

In this paper, for the purpose of constructing LAN(Local Area Network) with Token ring type Star-wired ring method, we implemented an in board network adapter and a concentrator using microprocessor. Using cconcentrato's communication controlling function, the concentator prevents a break of communication by by-passing the fault network adapter. Because, in the data transfer period, a concentrator recognized the network adapter at transmit and receiving side to construct single by -pass line and reduces ring latency time at both sides, this method can keep a high throughput in high and low load. Being considered the result of performance evaluation for the method our study employed, high throughput can be obtained.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1756-1758
• /
• 2003

포항 방사광 가속기의 선형가속기는 2.5GeV 전자빔 용 마이크로웨이브의 발생을 위하여 80MW 급 클라이스트론(klystron) 11대와 입사부 용 65MW 급 클라이스트론 1대를 사용한다. 80-MW 급 클라이스트론 부하를 구동하기 위하여 최대 펄스 정격출력 200 MW(400kv, 500A, 평탄도 4.4 ${\mu}s$)인 대출력 펄스 전원공급 장치(modulator)가 요구된다. 모듈레이터 시스템 용 PFN(pulse forming network) 커패시터의 충전용 입력전원으로써 최대 출력전압 50 kV, ${\pm}$ 0.5% 이내의 전압제어가 가능한 고전압 인버터 전원장치를 적용하여 클라이스트론 부하의 성능시험을 수행하였다. 클라이스트론의 RF 전력과 입력 빔의 특성을 정확히 측정하기 위하여 응답특성이 양호한 측정 장치와 정밀한 측정이 요구된다. 인버터 시스템의 적용에 따른 모듈레이터의 충전 특성을 파악하였으며, 방향성 결합기와 검파기를 설치하여 클라이스트론의 RF 출력을 측정하였다. 본 논문에서는 포항 방사광 가속기의 대출력 펄스 고주파원으로 사용되는 클라이스트론 부하의 성능시험 과정에서 수행하였던 시험장치 개선 및 특성 분석, 고전압(빔전압 320 kV) 및 RF 길들이기의 시험 결과에 관하여 고찰하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.289-291
• /
• 2005

고도화, 정보화시대를 맞이하여 대형인버터, 컴퓨터 등 전력풀질을 저하시키는 비선형 부하의 보급이 확대되고 있으며, 이들 비선형부하에 의한 전력품질 저하시 공정제어기, 마이크로프로세서 등과 같이 전력품질에 매우 민감한 기기의 오동작 등으로 경제적 피해가 증대되고 있다. 따라서 중요부하 및 계통을 보호하기 위한 전력전자 기술을 응용한 전력품질 보상기기 적용이 필요하다. 이에 본 연구에서는 전력품질 향상기기 성능평가 텐 실증기술 개발을 위한 전력풀질 실증시험장 구축 및 전력풀질 향상기기 실계통 적용시 효과분석을 위한 해석기법을 확보하고자 하였다. DSTATCOM, DVR, SSTS 등 전력품질 향상기기의 성능평가를 위해서 실계통에서 발생되는 외란을 모의할 수 있는 외란발생장치 등 시험설비와 전력품질 향상기기 및 실증시험설비를 제어하는 S/W와 시험결과를 분석하기 위한 전력품질 측정 및 분석시스템을 구축하였다. 순간전압강하, 순간전압 상승 파형을 외란발생장치를 구현하고 전력품질 향상기기의 보강효과를 분석하였다. 또한 전력품질 향상기기(DVR, DSTATCOM, SSTS)와 부하 등 시험설비에 대하여 EMTDC 프로그램용 모델 및 해석기법을 개발하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.224-237
• /
• 1995

An ECU(Electronic Control Unit) with 16 bit microcomputer has been developed. This system includes hardware and software for more precise control on fuel injection, ignition timing, and idle speed. This control system employs an air flow sensor of the hot wire type, a direct ignition system, an idle speed control system using a solenoid valve, and a crank angle sensor. Especially, the crank angle sensor provides two separate signals: One is the position signal(POS) which indicates 180 degree pulses per revolution, and the other is the reference signla(REF) that represents each cylinder individually. The conventional engine control system requires at least two engine revolutions in order to identify the cylinder number. However, the developed engine control system can recognize the cylinder number within a quarter of an engine revolution. Therfore, the developed engine control system has been able to control fuel injection and ignition timing more quickly and accurately, Furthermore, the number of misfire reduces during the cold start.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.2
• /
• pp.56-61
• /
• 1992

This paper is reported on the simulation and test results of a constant flux vector control scheme of an induction motor without any speed detecting eqiupment, in which the adaptive current PWM inverter is used. The rotor speed is estimated form stator voltage, current and parameters of motor, and control algorithm in the system is performed with by micro processor. By comparing the waveform of input current of this system with that of the case with taco-generator, good agreement is observed except small ripple component. Experimental results which are acquired at start up and during acceleration/deceleration are quite similar to those of the simulation results.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.5
• /
• pp.71-78
• /
• 2004

An infrared remote control-type transcutaneous control device using a $\mu$-processor is design for the totally implantable middle ear system. An infrared light transmission model for the tissue of skin was introduced and then a radiant intensity and the required current of the infrared light emitting diode(IR LED) driving circuit at transmission part were calculated for the external control device. And the transmission part generates IR signal by the system's own data protocol which prevents interferences from other infrared remote controls of the household appliances. The control part of the implanted device was designed to analyze functions of the received infrared(IR) signal that indicate the power ON/OFF and volume UP/DOWN. After the system is implemented, a data transmission experiments using 4 mm thickness of porcine skin were carried out. From the experiment, it was verified that the infrared control signal was transmitted to receiving module of the implemented system without any error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2078-2082
• /
• 2007

Recently, according to traffic accident statistics, traffic accidents occurring at night are as frequent as those during daytime, but their death rate is 1.5 times higher than that of daytime traffic accidents. This problem originates that the insufficient range of vision security of a driver causes the inappropriate accident confrontation. Therefore, in this paper, a microcontroller-based digital control method for the superior performance in headlight system is presented for optimal control that can adapt complex transient state, steady state and various environments. Specially in vehicles# headlight, its fundamental purpose is to implement the artificial headlight system which automatically controls the lighting patterns most adaptive to driving, road and weather conditions. Therefore we aimed at the development of headlight system, focused on the implementation of an artificial vehicle, of more advanced convenience and safety for drivers.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.61-69
• /
• 1998

In this paper, discrete current control of voltage source inverters is proposed. As a current control scheme, the constant switching frequency predictive current control is adopted and implemented with DSP microprocessor system. In particular, the proposed method is for the compensation of the control lagging due to calculation delays in the microprocessor controller. In controlling the current, the inverter output voltage saturation problem is inevitable and usually affects the current control performance. So, the saturation boundary condition of the inverter output voltage and its effects on the current controal performance of the proposed current control scheme are investigated with experiment. Finally, the proposed scheme is applied to the active power filter system and some results are described for validation.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2429-2431
• /
• 2003

능동 시각 시스템은 카메라 시선 방향을 조정할 수 있는 장치로, 기존의 고정식 스테레오 카메라가 가질 수 없는 여러 가지 장점으로 인해 최근 많은 연구가 진행되고 있다. 능동 시각 시스템을 이용하여 움직이는 물체를 추적하는 경우, 목표 위치가 제어 주기마다 바뀌게 되는데 이 때 시스템의 현재 속도를 고려하지 않는다면, 급격한 속도의 변화로 인해 저크(jerk)가 크게 발생하게 된다. 저크는 물체 추적 성능에도 영향을 미칠 뿐만 아니라, 전원단의 잡음 발생을 유발시켜 제어기의 동작을 방해하며, 시스템에 기계적인 손상을 주기도 한다. 이러한 문제점을 해소하기 위해 기존의 방법들은 스플라인이나 고차 다항식의 계산 방법을 사용하였으나 계산량의 복잡도로 인해 다축 제어가 필요한 능동 시각 시스템에서 구현하기가 어렵다. 본 논문에서는 삼각 함수를 이용한 종(bell) 모양의 속도 프로파일을 이용해서 저크 탄생을 억제할 수 있는 제어기 구조를 제안한다. 제안된 방법은 간단한 계산량으로 저가의 마이크로프로세서에서도 실시간으로 동작이 가능하며 임의의 시점에 임의의 속도로 움직이고 있는 시스템에 저크를 최소화할 수 있는 지령 속도를 만들어 낼 수 있다. 제안된 방법은 시뮬레이션과 실제 시스템에 적용하여 그 유용성을 검증하였다.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.920-930
• /
• 2012

In this paper, we designed and built a wired temperature controller system which is based on ASIC for a wireless temperature controller system based on FPGA. FPGA devices and wireless controller systems are growing quickly especially for industrial systems for sensing temperature and humidity. FPGA can set up a desired system and a CPU, and directly set up or change a peripheral device based on an IP quickly for an affordable price. This wireless system is easy to install in the field where there are lots of changes and the system is complex. It also has advantages for maintenance. In this study, we are using a 32 bit RISC CPU based on MicroBlaze, with a touch interface, peripheral device, and porting the embedded Linux. Also, we added wireless communication using ZigBee. With this system we provide remote monitoring and control through the web by adding a web server. Compared to the original system, we say not only a performance improvement, but also more efficient development and cheaper costs. In this study, we focused especially on building a better development environment and a more effective user interface.