• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1381-1387
• /
• 2007

Up to now, various continuous-processing systems are used in many industrial applications such as textile machines, paper-making machines, printing machines, and so on. In these applications, the tension forced on the products in the control volume can be changed according to the velocity difference between the feeding roll and the delivery roll. Specially, the tension variation generated by the velocity difference, or the inertial effect can decreases the quality of the products in the textile process. In this paper, the tension control problem in a circular knitting machine system is treated to cope with these problems. Firstly, the tension relationship in the winding mechanism of general continuous-processing systems is modeled. Next, to effectively drive the feeding and delivery rolls in the circular knitting machine system, a new tension control method is presented by considering the inertia compensation and the velocity difference between the feeding roll and the delivery roll. Through the experimental works, it is shown that the proposed tension control method can be used to improve the performance of tension control in the control volume of the given circular knitting machine system.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.75-80
• /
• 1993

This study describes a non-invasive optical sensor and system in order to obtain oxygen saturation of blood, in-vitro. The sensor contains LED 665nm and 805nm of wavelength for light source and PIN photodiode for light detector in flat pack. The sensor system for measurement of oxygen saturation has breadboarded, including signal amplifier, filter, displayer, A/D converter, microprocessor and memory. Experimental set-up for non-invasive measurement of oxygen saturation in-vitro was done. When the variation of oxygen saturation is compared with that of each wavelength, the variation of 665nm is more than that of 805nm by five times. As oxygen saturation varies from 100% to 60%, and the reflection ratio (R805/R665) is changed linearly. The oxygen saturation in $100%{\sim}60%$ range can be measured with about 5% resolution by the developed sensor, such that if this sensor connects with the main artery and vein, the artificial heart can be controlled rapidly and precisely from measurement of the sensor.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.192-197
• /
• 2002

1. 실시간 모니터링 -온실 내부환경의 계측장치로 모듈화된 단일 칩 마이크로프로세서를 이용한 하우스 모니터를 개발하였다. 개발된 다수의 하우스 모니터는 RS-485통신을 이용하여 개발된 프로토콜을 통하여 그룹 모니터와 통신하면서 계측 데이터를 전송하였고 안정된 계측 성능을 보였다. 또한 그룹 모니터는 하우스모니터로부터 수신한 데이터를 인터넷 환경 TCP/IP 통신에 의해 서버에 정보를 전송하고 데이터베이스 서버에 저장할 수 있었다. 2. 클라이언트 서버 모델 -클라이언트 모니터를 통하여 허용된 사용자들은 해당 온실의 상황을 원격지에서 파악할 수 있는 있었다. 또한 분산환경 기술을 이용하여 서버를 경유하여 데이터베이스 서버에서 데이터 셋을 가져와 과거 재배 사례 등을 조회 및 이용 가능하였다. 이는 전문가에게 접근을 허용함으로써 재배에 관한 지원이 가능하도록 하였다. 데이터 베이스 시스템으로 연계하여 온실환경 정보를 분석하는 것이 가능하였다. 3. 기대효과 및 나아가야 할 방향 -개발된 시스템을 식물 공장 내 작물의 재배환경을 데이터베이스화하여 재배사례 데이터베이스를 형성하고 작물이 가장 잘 자라는 최적 재배 환경을 연구하여 고품질의 작물 재배에 이용될 수 있다. 또한 식물공장의 운전실적, 환경 조건, 환경 조절비용 등의 분석에 효율적으로 이용될 수 있을 것으로 예상되며 각 환경인자들과의 관계를 구명하는데 도움을 줄 것이다. 축적된 작물의 재배 사례 데이터베이스를 이용하여 작물 특성 및 재배 연구에 도움을 줄 수 있을 것이다. 제어 장치들의 운영실적을 분석함으로써 제어 시스템의 효율적이고 경제적인 제어가 가능하도록 할 수 있을 것이다. 이들이 모두 완성되면 전문가 및 전문가 시스템으로부터 지원을 받는 지능형 식물공장이 가능할 것이다. 본 연구에서 개발한 계측 모듈 및 데이터베이스 시스템은 실제 농가에 설치된 전용선을 이용하여 실증 실험을 통해 수정·보완하여야 할 것이다. 또한 시설원예분야에서 있어서 통신체계에 대한 표준화 연구가 수행되어 앞으로 개발될 다른 시스템들과의 호환성을 갖도록 해야 할 것이다. 앞으로 온실의 경영 및 관리 데이터베이스를 개발하여 첨단온실의 통합 관리 및 정보 시스템을 구축하여야 할 것이다. 또한, 시설원예의 환경 설계의 기준을 적용할 수 있도록 하여야 할 것이다.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.295-301
• /
• 2019

A heater in a portable real-time polymerase chain reaction(PCR) system is one of the important factors for controlling the PCR thermocycle precisely. Since heaters are integrated on a small-sized PCR chip for rapid heating and fabricated by semiconductor processes, the cost of producing PCR chips is high. Here, we propose to use chip resistors as an inexpensive and accurate temperature control method. The temperature distribution was simulated using one or two chip resistors on a real-time PCR chip and the PCR chip with uniform temperature distribution was fabricated. The temperature rise and fall rates were $18^{\circ}C/s$ and $3^{\circ}C/s$, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.81-87
• /
• 2021

In this study the skin care system was designed and tested by introducing V-IPL(Variable-Intense Pulse Light) methods that allow various skin treatments. The discharge method, a new method of switching on the flash lamp sequentially according to the lesions, was used. Pulse shape control is implemented in the system using the conventional LC variable method and the switching method control method of the switching element. As a result, the pulse width could be varied up to 1[㎛] by using a microprocessor, and by turning on the flash lamp sequentially along the lesions the depth and width, the pulse shape and pulse shape could be more diverse. We could also make long pulses of up to 1~100[ms] in various pulse width. And the special differences between the existing system and the proposed system in this study are as follow. Existing system is one pulse(pulse width : 1~40ms) and proposed system is three pulse(pulse width : 1~100ms).

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.3
• /
• pp.27-35
• /
• 2011

Design of Sensor nodes in Wireless Sensor Network(WSN) should be considered some properties as electricity consumption, transmission speed, range, etc., and also be needed the protection against various attacks (e.g., eavesdropping, hacking, leakage of customer's secret data, and denial of services). The stream cipher Rabbit, selected for the final eSTREAM portfolio organized by EU ECRYPT and selected as algorithm in part of ISO/IEC 18033-4 Stream Ciphers on ISO Security Standardization recently, is a high speed stream cipher suitable for WSN. Since the stream cipher Rabbit was evaluated the complexity of side-channel analysis attack as 'Medium' in a theoretical approach, thus the method of power analysis attack to the stream cipher Rabbit and the verification of our method by practical experiments were described in this paper. We implemented the stream cipher Rabbit without countermeasures of power analysis attack on IEEE 802.15.4/ZigBee board with 8-bit RISC AVR microprocessor ATmega128L chip, and performed the experiments of power analysis based on difference of means and template using a Hamming weight model.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.699-705
• /
• 2022

Purpose: Sequence control is widely used by being applied to manufacturing, distribution, construction, and automation in the medical industry. With the development of the fourth industry, artificial intelligence convergence technology in the control field is becoming an important factor in the industry. In particular, it is required to evaluate the safety and innovation of facilities where microprocessors and artificial intelligence are fused to existing systems and develop reliable equipment, so it is intended to develop equipment for educational purposes and drive the development of the field. Method: The self-developed all-in-one artificial intelligence controller module is a device that combines artificial intelligence capabilities with existing sequence and PLC control circuits. As the performance evaluation items of this equipment, the recognition ability of motion, voice, text, color, etc. and the stability and reliability of the circuit were evaluated. Conclusion: After designing the sequence and PLC circuit, the performance evaluation items of the integrated integrated artificial intelligence controller module were all satisfied, and there was no problem in the safety and reliability of the circuit.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.10-13
• /
• 2002

In this study, we used a 16-bit microprocessor, 80C196KC for a control part in order to develop a multi-functional wheel-chair system, and implemented a joy-stick to control this system. For the complete system, we used a commercial electromotive wheelchair as a basic plant, and applied an encoder to get the rotating number of the motor to transfer data to the MCU to control the motor. We used PWM (Pulse Width Modulation) method to control the wheel-chair motor where a H-bridge circuit was configured. We used the fuzzy control algorithm for the operation of DC motor, which was attached to the electromotive wheelchair and manipulated following the change of the joystick position while a user was controlling the Joystick. He also could control the speed and direction of DC motor as well as control position information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2291-2293
• /
• 2011

In this paper, the composes with digital position with a computer logical operation order with the signal processing method which is pliability and result of the logical operation which confronts in input signal from the outside input-output Channel leads and about the drive which the possibility to output at the outside is a research. This Decoder IC Multiplexer & De-multiplexer, position the function with from the digital signal circle where the imagination embodiments and BIT outputs of IC etc. are possible is possible in basic and usefully from the general industrial, could be used.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.22-28
• /
• 1998

It is required to automate a manufacturing industry of a glasses frame, because of the inaccuracy in assembly and shortage of labor. So, in this paper, rim-lock electric welding system has been developed in order to automate a electric welding process and to increase welding quality. Rim-lock electric welding system consists of circular and linear feeder, holder for welding rim and lock, and the equipment for silver-lead provision and so forth. Main controller is a V55 microprocessor which is easy to be expanded into other function. Control program is programed using 'C' language which is easier than other language in coding, modification and adding function. At the practical welding that Rim-Lock electric welding system from this study is used, we can get such advantages as uniform quality of electric welding, continuous operation and improved productivity.