• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.36-40
• /
• 2012

We have developed the detection method of the resonance frequency of micro/nano mechanical resonator using optical method. The optical interferometery method enabled us to detect the displacement change of resonators within several nm scale. The micro mechanical resonator was produced by attaching a micro mechanical cantilever to a piezo ceramic. The mass of cantilever was increased by evaporating Au using electron beam evaporator and the mass variation was estimated by detecting the resonance frequency changes.

• Computational Structural Engineering
• /
• v.3 no.2
• /
• pp.117-128
• /
• 1990

This study was intended to provide efficient algorithms for high quality postprocessing on the basis of microcomputers with limited capacity and functionality. Improved methods of postprocessing including stress contouring, internal force diagraming, and displacement animation, were proposed and implemented into a new finite element system. Visualization of three-dimensional structural behaviors was treated with special emphasis.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.72-73
• /
• 2002

매우 작은 이득 매질 안에 높은 농도의 레이저 이온을 도핑하여 공진기의 길이를 수 3m 이내로 대폭 축소하였으면서도 기존의 고체 레이저보다 효율적이며, 소형화된 마이크로 칩 레이저에 관한 연구는 최근 여러 연구진에 의해 활발하게 진행되고 있다. 기존의 YAG는 열 전달 계수가 크며, 역학적, 광학적, 화학적 성질이 모두 매우 우수한 레이저 매질로 평가되어왔으나 대표적인 레이저 이온인 Nd이온과 비교하여 Yttrium이온의 크기가 커서 도핑 농도를 높이는데 한계를 가지고 있다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.315-319
• /
• 2004

Static and dynamic responses of micro cantilever beam structures undertaking electrostatic forces are obtained employing Galerkin's method based on Euler beam theory. Variations of static and dynamic responses as well as resonant frequencies are estimated for several sets of beam properties and applied voltages. It is shown that the applied voltage influences the deflection and the modal characteristics significantly. Such information can be usefully employed for the design of MEMS structures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.99.2-99.2
• /
• 2016

본 발표에서는 공중에 떠있는 그래핀 기반 나노전기역학 시스템 (NEMS)의 기본 물성과 응용 방법에 대해 소개하고자 한다. 단겹 그래핀을 리본형태로 패턴하고 마이크로 전사기술을 통해 공중에 띄우는 공정을 이용한 그래핀 NEMS 소자 제작 방법을 먼저 소개하고 우리 연구그룹에서 지금까지 측정한 이 구조의 기본 역학적 물성 연구 결과를 소개한다. 미세 질량이 공중에 매달린 그래핀에 더해짐에 따라 역학적 공명 주파수가 줄어드는 현상을 이용하여 그래핀 기반 초미세 질량 센서 응용 방법에 대해 먼저 말하고 이후 같은 구조로 역학적 공명주파수를 이용한 RF 소자 응용 가능성에 대해서 이야기 하고자 한다. 마지막으로 다시 같은 구조를 통해 그래핀 자체에서 강한 가시광선이 발광되는 현상을 처음으로 발견한 내용에 대해 소개하고 이 현상에 대한 물리적 분석과 함께 응용 가능성을 제안하며 발표를 마무리하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.69-74
• /
• 2017

The validity of friction factor theory, based upon conventional-sized passages for microchannel flows, is an active area of research. The high surface to volume ratio of a microchannel offers many advantages over macroscale devices and processes. This study focused on the laminar flow (16$161{\mu}m$ to $664{\mu}m$ for single-phase liquid flow. A controllable syringe pump was used to provide flow while a differential pressure transducer was used to record the pressure drop. These results demonstrated that a 3D printer can drastically simplify custom microchannel fabrication and still support complex features, which are typically only accessible with advanced fabrication techniques.

• Journal of the Korean Society of Visualization
• /
• v.8 no.3
• /
• pp.29-34
• /
• 2010

This paper proposes a design method to provide uniform flow in a microreactor. Uniform momentum approach is adopted with 10 pillars before and after the chamber having a different slope inlet channel. The slope and number of pillars are two factors to make a uniform flow in the microreactor, covering the hexagonal gold layer. The CFD analysis about the designed microreactor is carried out and the velocity vector field measurements are made in the fabricated microreactor by micro PIV technique. The uniformity of microreactor flow was confirmed by both numerical simulation and experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.285-290
• /
• 2004

Electro-active polymer, one of smart materials, is a new alternative technology, which can get an ultra precision movements and bio-compatibilty. This paper presents the relationship between elastic modulus and maximum deflection as a key property of maxwell stress effects and also presents the relationship between dielectric constant and maximum deflection as a key property of electro-striction effects in disc-type actuators using segmented PU. To induce equation about distributed load of a disc, we use boundary condition of fully clamped circular plate and to obtain design parameters of a micro-fluidics system, CFD simulation is performed.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.671-674
• /
• 2008

We investigate the slippage effect in a micro-channel depending on the surface characteristics; hydrophilic, hydrophobic, and super-hydrophobic wettabilities. The micro-scale grooves are fabricated on the vertical wall to make the super-hydrophobic surfaces, which enable us visualize the flow fields near walls and directly measure the slip length. Velocity profiles are measured using micro-particle image velocimetry (Micro-PIV) and compared those in the hydrophilic glass, hydrophobic PDMS, and super-hydrophobic PDMS micro-channels. To directly measure the velocity in the super-hydrophobic micro-channel, the transverse groove structures are fabricated on the vertical wall in the micro-channel. The velocity profile near the wall shows larger slip length and, if the groove structure is high and wide, the liquid meniscus forms curves into the valley so that the wavy flow is created after the grooves.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.569-570
• /
• 2007