• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.3
• /
• pp.1-6
• /
• 2005

The 24 channel meridian electric-potential measuring System consists of a main cpu module, bio-signal analog module, interface module, power module, personal computer. The graphic user interface program conveniently allows user to setup, calibrate, measure, store, and control the meridian electric-potential measuring system. This system and program will continually be evolved using a database of clinically correlated meridian electric-potential. A variety of system configurations gives it the ability to make a user-favorable environment for measuring.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.5
• /
• pp.625-632
• /
• 2014

It is required a lot of strength in aquaculture, such as dragging up or moving heavy loads. So, a helper system like excavator at construction is need for fishermen. As most of HFMSC(Hydraulic Fishery Managing Small Crane)s are operated based on ON/OFF control, it can make sway the contents in the crane. In worse case, it could threaten workers. In this paper, we development the MICOM based controller which can reduce the swing sway. This paper describes the hydraulic characteristics, the design method of controller and the control algorithms. And, the proposed controller show the efficiency to carry out the experimental validation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2570-2578
• /
• 2010

This paper presents a digital-controlled single-phase power-factor correction (PFC) converter operating in critical current conduction mode. The proposed converter utilizes the DC-DC boost converter topology for the PFC and operates the inductor current in critical conduction mode. Because the proposed converter is controlled digitally using a micom, its control circuit is simplified and the converter operates more effectively. This paper first explains the operational principles of the proposed converter and then analyzes the converter circuit. And this paper explains the implementation method of proposed converter with a detail design example, which is divided into software and circuit design parts. Also, it is shown through the experimental results of the prototype converter by the designed circuit parameters that the proposed converter has good performance as a single-phase PFC converter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.50-57
• /
• 2011

In this paper, we proposes a new load-sharing algorithm with a ATmega2560 based digital communication. Proposed algorithm is different from conventional analog method. The high speed communication digital control is performed. To apply the digital communication and real-time control for time-sharing token bus method, we implemented high efficient load-sharing and redundancy. Also this system make down the price by auto ID algorithm and system response is improved by controller's voltage and current integral value sharing. In parallel system prototype, each module have controller and performed load-sharing according to master module integral value. In this paper, we verify the validity of proposed algorithm using PSIM program and prototype.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.53-59
• /
• 2009

By the use of open source and 16bit Microcomputer, IDB(Integrated Development Board) for embedded technical education was designed and developed. Based on 16bit MCU H8/300H, LED, LED Matrix, motors, sensors and various I/O circuitry, and the connection to a computer via the SCI, and $16{\times}2$ character LCD was designed and implemented on IDB. In addition, the software development environment was build by the assembler and H8 C compiler which is provided to the open-source software. And memory expansion was considered to include TRON(Real time OS) and uClinux. To verify the developed board, IDB was fabricated by PCB machine, and the fuction was confirmed by the basic I/O control program.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.305
• /
• pp.69-74
• /
• 2002

최근 승강기의 현대화 사업에서는 단공기(短工期)$\cdot$저가격으로 특히 신뢰성 향상을 기대할 수 있는 제어개수(制御改修:전기기기를 일신하는 개수방법)가 주류를 이루고 있다. 그래서 미쓰비시(삼릉)전기에서는 납품한지 20년 이상 경과한 직류-기어리스(DC-GL)고속엘리베이터를 대상으로 하는 제어개수전용의 구동방식을 개발하여 동사 본사빌딩에 납품하였다. 새로운 구동방식은 현재 널리 적용되고 있는 고속엘리베이터의 인버터제어기술을 응용하여 개발한 초퍼회로방식이다. 제어회로에서는 동사의 최신 엘리베이터와 같은 마이컴시스템을 채용하여 고성능화와 부품의 공용화를 도모하였다. 또한 주회로에는 고조파대책, EMI(Eletro-magnetic Interference) 대책 및 누설전류대책을 시행하였다. 특히 직류전동기의 계자제어에서는 엘리베이터의 운전상태에 따라 계자전류를 가변하는 가변계자전류제어를 적용하였다. 이번에 개발한 제어방식은 다음의 특징을 갖고 있다. (1)고조파전류를 억제하였기 때문에 빌딩측에서의 고조파대책이 불필요하다. (2)동사 제작의 워드레오나드방식과 비교하여 약 $40\%$정도 소비전력을 감소시킬 수 있다. (3)동사 제품인 최신 엘리베이터 수준의 성능(승차감, 착상정도 등)을 실현하였다. (4)최신 엘리베이터와 동등한 풍부한 옵션에 대응할 수 있다. 당분간은 속도 $120\~$360m/min, 용량 1,600kg 이하의 고속엘리베이터에 적용하고 점차적으로 적용영역을 확대해 나갈 예정이다.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.413-417
• /
• 1990

Various sampling methods are used for microprocessor-based measurement and analysis to nonsinusoidal waveforms caused by power electronic converters. The hamonic component generates the indicating errors at the measuring instruments. This can be solved by microprocessor-based measurement and hence the microprocessor-based measuring equipment and its algorithm are developed in this paper. As a result the suggested equipment has very good measuring performances.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.338-341
• /
• 2001

This paper describes on the development of power monitoring system using microprocessor. The detecting power system is composed of main controller system and analyzing software. The system detected voltage, current temperature, leakage current and its saved in ROM. This system applies the 'AT89C52' to CPU and 'AM29F040B' used a memory to save the data.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.657-661
• /
• 2001

In This paper describes on the development of detecting power using Microprocessor. The detecting power system is composed of main controller system and analyzing software. Re system detected voltage, current, temperature, leakage current md its saved in ROM. This system applies the 'AT89C52' to CPU and 'AM29F040B' used a memory to sue the data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.1
• /
• pp.10-18
• /
• 2017

In this paper, we designed and implemented a visible light identification(VLID) system consisting of a VLID reader and a tag which backscatters incident lights from the reader. A VLID tag sends its ID to the reader by switching an LCD shutter which is located on its surface. The VLID reader consists of six LEDs and a photodiode(PD). The LEDs emit visible light and a PD located in a center position of LEDs receives backscattered light from the VLID tag. A microcontroller and a commercial liquid crystal display(LCD) shutter for 3D-TV glasses are used to implement a VLID tag. Experiments were conducted to confirm VLID system performance. We successfully demonstrated experiments to send NRZ-OOK signal of 100 bps over a distance of 35 cm at daytime. Also, we suggested the theoretical maximum transmission rate and the various methods to enhance the separation distance between a VLID reader and a tag.