• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.225-226
• /
• 2009

본 연구에서는 마스크리스 노광장치의 두 프로젝션 광학계 사이에 있는 마이크로프리즘 어레이에 관한 연구이다. 마이크로프리즘의 원리와 종류에 대해 알아보고, 마이크로프리즘의 출사부의 모양에 따라 패턴의 모양이 변함을 확인하였다. 그리고 원하는 패턴을 만들 수 있는 마이크로프리즘을 설계하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.387-388
• /
• 2008

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.24-31
• /
• 2004

Masking effect of the nanoscratched silicon (100) surface was studied and applied to a maskless nanofabrication technique. First, the surface of the silicon (100) was machined by ductile-regime nanomachining process using the scratch option of the Nanoindenter${ \circledR}$ XP. To clarify the possibility of the nanoscratched silicon surfaces for the application to wet etching mask, the etching characteristic with a KOH solution was evaluated at room temperature. After the etching process, the convex nanostructures were made due to the masking effect of the mechanically affected layer. Moreover, the height and the width of convex structures were controlled with varying normal loads during nanoscratch.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.503-507
• /
• 2002

Mask manufacturing is a high COC and COO process in developing of semiconductor devices, because of the mass production tool with high resolution. Direct writing has been thought to be one of the patterning method to cope with development or small-lot production of the device. This study focused on the development of the direct, mastless patterning process using stereolithography tool for the easy and convenient application to micro and miso scale products. Experiments are utilized by three dimensional CAD/CAM as a mask and photo-curable resin as a photo-resist in a conventional stereo-lithography apparatus. Results show that the resolution of the pattern was achieved about 300 micron because of complexity of SLA apparatus settings, inspite of 100 micro of inherent resolution. This paper concludes that photo resist and laser spot diameter should be adjusted to get finer patterns and the proposed method is significantly feasible to mastless and low cost patterning with micro and miso scale.

• 한국진공학회지
• /
• 제22권4호
• /
• pp.198-203
• /
• 2013

에너지 수확은 우리주변에 존재하는 버려지는 에너지를 유용한 전기에너지로 변환하는 기술이다. 마찰전기 소자는 접촉을 통한 정전기를 유도하는 원리로 동력학적 에너지를 전기에너지로 전환하는 소자이다. 본 연구에서는 소프트 식각 기술을 활용하여 제작 단계를 최소화한 마찰전기 에너지 수확소자를 개발하고, 그 전기적 특성을 측정하였다. 마찰전기를 통한 발전은 마이크로패턴을 통해 마이크로 거칠기를 가진 알루미늄 층과 PDMS 층 사이에서 발생한다. 이때 PDMS 층의 마이크로 패턴은 마스크리스 식각을 통해 만들어진 알루미늄 층의 마이크로 패턴을 소프트 식각법으로 바로 본뜨는 방식으로 제작되었다. 본 소자는 2 V와 20 nA의 발전 성능을 나타낸다.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.199-206
• /
• 2005

Mask manufacturing is a high COC and COO process in developing of semiconductor devices because of mask production tool with high resolution. Direct writing has been thought to be the one of the patterning method to cope with development or small-lot production of the device. This study consists two categories. One is the additional process of the direct and maskless patterning generation using SLA for easy and convenient application and the other is a removal process using wet-etching process. In this study, cured status of epoxy pattern is most important parameter because of the beer-lambert law according to the diffusion of UV light. In order to improve the contact force between patterns and substrate, prime process was performed and to remove the semi-cured resin which makes a bad effects to the pattern, spin cleaning process using TPM was also performed. At a removal process, contact force between photo-curable resin as an etching mask and Si wafer is important parameter.

• 소성∙가공
• /
• 제12권7호
• /
• pp.640-646
• /
• 2003

The nanoprobe based on lithography, mainly represented by SPM based technologies, has been recognized as potential application to fabricate the surface nanostructures because of its operational versatility and simplicity. The objective of the work is to suggest new mastless pattern fabrication technique using the combination of machining by nanoindenter and KOH wet etching. The scratch option of the nanoindenter is a very promising method for obtaining nanometer scale features on a large size specimen because it has a very wide working area and load range. Sample line patterns were machined on a silicon surface, which has a native oxide on it, by constant load scratch (CLS) of the Nanoindenter with a Berkovich diamond tip, and they were etched in KOH solutions to investigate chemical characteristics of the machined silicon surface. After the etching process, the convex structure was made because of masking effect of the affected layer generated by nano-scratch. On the basis of this fact, some line patterns with convex structures were fabricated. Achieved patterns can be used as a mold that will be used for mass production processes such as nanoimprint or PDMS molding process. All morphological data of scratch traces were scanned using atomic force microscope (AFM).

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.177-184
• /
• 2001

C3M(chemical mechanical micro machining) is applied for diminishing the size of burr and fabricating the massless patterning for aluminium wafer(thickness of 1${\mu}m$). It is difficult to perform the micro size machining with the radically increased shear stress. While the miniaturization and function-orientation of parts has been needed in the many field such as electronics, optics and medicine. etc., it is not enough to satisfy the industry needs in the machining technology. In this paper feasibility test of diminishing burr and fabricating maskless pattern was experimented and analyzed. In the experiment oxide layer was farmed on the aluminium with chemical reaction by ${HNO_3}$(10wt%), then the surface was grooved with tungsten carbide tool for the different condition such as the load and fred rate. The result was compared with the conventional machining to show the improvement of C3M with SEM for burr diminish and XPS for atomic existence, AFM for more precise image.

• 마이크로전자및패키징학회지
• /
• 제16권4호
• /
• pp.33-39
• /
• 2009

마스크리스 리소그래피(maskless lithography)에 응용하기 위한 마이크로렌즈 어레이(microlens array, MLA)가 석영의 습식 식각과 UV 접착제(UV adhesive)의 코팅을 바탕으로 개발되었다. 제작된 MLA의 초점거리는 ${\sim}45\;{\mu}m$ 정도였으며, 집광되는 광선의 초점은 ${\sim}1\;{\mu}m$로 측정되었다. MLA를 통과하며 초점을 맺은 빔(beam)의 크기 및 세기가 charge coupled device (CCD) 카메라와 빔 프로파일러(beam profiler)를 이용하여 각각 측정되었으며, 일정한 세기의 점들이 초점면에서 고르게 관찰되었다. 초점거리는 코팅된 UV 접착제의 두께에 따라 변화하였으며, UV 접착제의 두께가 두꺼울수록 짧아지는 경향을 보였다. 일반적인 마스크 얼라이너(mask aligner)를 이용한 MLA의 UV 포커싱(UV focusing)이 감광막(photoresist, PR) 상에서 실시되었으며, MLA를 통과한 빛이 감광막 위에 일정하게 집광되었다. 마스크 얼라이너와 MLA 사이의 거리 변화에 따라 감광막에 구현된 패턴 사이즈가 조절 되었다. 고온에서 오랜 시간이 지난 후에도 소자의 특성은 전혀 변함이 없었다.