• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.914-917
• /
• 2008

This paper was to discuss the case and cause of debonding defect of wood floor board in apartment house by investigating actual survey. Most frequent defect in wood floor board was debonding of floor board. Scratch, gap and crack of floor board were also found in floor board installment work. Causes of debonding of floor board is shrinkage of cement mortar beneath floor board and expansion of floor board. Haste in floor board work did not provide enough time to dry cement mortar fully, which led to continue to dry after the installment of floor board. It caused moisture movement toward wood floor board. Accordingly, Before floor board work, careful consideration on moisture condition of cement mortar and enough curing time to eliminate the effect of moisture are taken into.

• Archives of design research
• /
• v.12 no.3
• /
• pp.237-246
• /
• 1999

The study ooramed has the meanngs as a goal, to examine a character and changes of function a "Maru" in the literatures historically. Methodically the literatures in the temporal oonsequences were selected, and the "Maru", whidl oomes into it, was interpreted in its historical oonnections. By the investigation I oould oome to the following results. First of all, those terms "Maru" and "Daechll1Q" were cfifferently used after the sizes and p1ares of the spaces concerned. I.e, the "Maru" in the center of the house is called "Daed1ung", With the Maru does not concern actually its p1are, Secondly, the functions of the spare "Maru" are characterized as follows. ·Space for the important ceremonies ·Spare for the passage and the switching of two or several spaces. ·Determination of the hierardly of spares in the whole house. ·Spare for the receipt. ·Spare for sleeping and for living. ·Spare for work, storage etc. Thirdly, the meanings of the "Maru" were dlanged as follows in the time. ·The term "Man! was used from the past to today without interrujjion. Arot.l1d 1930 the tenns "Yangsil" and "Geosil" for the tenn "Maru" were emerged. ·The different dlaraderistics for the space "Maru" are found in the cortemporary literatures only rare. This thing explains itself by the fad that the "Maru" becomes the inner-spare after 1900 by the restructuring of the dwelling spares.hing explains itself by the fad that the "Maru" becomes the inner-spare after 1900 by the restructuring of the dwelling spares.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.4
• /
• pp.73-79
• /
• 2004

Mountain side ditch is constructed at the top of cutting slopes around road and it drains the surface water that flowed from upper part. Mountain side ditch is constructed to keep away the influx of the surface water into cutting faces. However, if Mountain side ditch is constructed on the top of cutting slopes, it is cause of trouble. For example, difficulty of quality control and lack of drainage faculty. Therefore, the faculty and establishment propriety of mountain side ditch are evaluated seriously, according to the condition of ground, topography and rainfall in this paper. Results from the study for the numerical analysis of effect of mountain side ditch indicate that safety factor is enlarged about 3% at rainfall.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.29-34
• /
• 2012

To examine possibilities to make use of woodceramics for the lower material of hot-floored ondol boards, woodceramics made from sawdust board with Pinus densiflora, put them in a wood frame and concrete block and heated them sending an electric current, and measured changes in surface temperature of a laminated floor board and a plywood floor board. As the sending an electric current to time passed, their surface temperature increased rapidly up to 20 minutes, and then gradually ascended. In terms of the surface temperature in the wood frame, the beginning temperature of a plywood floor board was higher than that of laminated floor one; however, as time passed, a laminated floor board's temperature rose, and after 60 minutes, it showed similar to the temperature of a floor board of lamination. On the other hand, the surface temperature in a concrete block showed that the laminated floor board was higher than the plywood floor board in both early and 60-minute later temperatures. With the lapse of time after switching off, the surface temperature of floor boards slowly dwindled up to 9 minutes, and from that time on, began to drop sharply. In terms of the descent speed of surface temperature, when woodceramics' surface temperature was adjusted at $70^{\circ}C$, the laminated floor board was the highest; when it was at $80^{\circ}C$, the plywood floor board was the highest, resulting in rapid descent speed of heat.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.157-162
• /
• 2018

The increase of risk in port due to the increase in ship size and sea level rises, the standard crown height will increase. In this study, cruise and container ships will need to raise their crown height due to the projected wind pressure areas becoming larger due to the ships' size increase. The mooring assessment was evaluated with the rise of the crown height. The cruise ship of GT 100,000 tons exceeded the permissible breaking force of the mooring line under the crown height conditions of wind speed of 30 kts when the wind direction was $45^{\circ}$ to the direction of the bow. Also, the elevation angle of the pier and mooring line was analyzed and exceeded the crown height, and it was determined that it is necessary to adjust the crown height. Container ships of DWT 100,000 tons were analyzed to exceed the limit of sway motion at the crown height and it was determined that they need to be adjusted to the minimum crown height standard.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6135-6142
• /
• 2012

This study is conducted to understand the different characteristic of the inner and outer spacing of Sarangche Numaru according to their geographical location conditions during its construction in 15-16th century. The results showed; first, for hill-type, the side of the Numaru that is in contact with the Sarang Madang makes a short side of Sarangche Numaru regardless of the Orientation and for flatland-type, the side of the Numaru in contact with the Sarang Madang makes a long side of Sarangche Numaru. Secondly, for hill-type, Sarang Madang is not focused as the main view, instead it supports the view of the mountains that are around however, for flatland-type, Sarang Madang is focused as the main view therefore, an inner garden is formed inside Sarang Madang. Lastly, for hill-type, Cho Shan is used as an appropriative landscape while for flatland-type, Sarang Madang is used as the main view and an inner garden is formed because of the diversification of Sarang Madang's function.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.6
• /
• pp.766-773
• /
• 2021

This paper presents an implementation result and performance evaluation of pavilion management services that does not only provide real-time status of the pavilion in the forest but also prediction services through machine learning. The developed hardware prototype detects whether the pavilion is occupied using a motion detection sensor and then sends it to a cloud database along with location information, date and time, temperature, and humidity data. The real-time usage status of the collected data is provided to the user's mobile application. The performance evaluation confirms that the average response time from the hardware module to the applications was 1.9 seconds. The accuracy was 99%. In addition, we implemented a pavilion availability prediction service that applied a machine learning-based SVM (Support Vector Model) model to collected data and provided it through mobile and web applications.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.165-171
• /
• 2002

This study was to investigate the adhesion properties of fancy veneer and base panels and formaldehyde emission of wood-based floorings bonded with urea-melamine formaldehyde adhesives. We focused on stoichiometric mole ratio of reactive functional groups. The urea-melamine formaldehyde adhesives were made at twelve different formaldehyde/urea-melamine mole ratios. The interlaminated shear strength and formaldehyde emission of wood-based floorings bonded with selected adhesive among these adhesives were examined. The results showed that the bonding properties were high and the formaldehyde emission was low as the adhesive consisted of stoichiometric mole ratio of formaldehyde/urea-melamine. Interlaminated shear strengths of HDF(High Density Fiberboard) flooring were over 14 kgf/cm² at all mole ratios. At the mole ratio of 1.0, HDF flooring showed low value of formaldehyde emission of 953 mg/L. Interlaminated shear strengths of Plywood flooring were high, 14.02 kgf/cm² at mole ratio of 1.4. At the mole ratio of 1.0, Plywood flooring showed low value of formaldehyde emission of 0.26 mg/L.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.42-50
• /
• 2013

Since 1990's, a plywood for flooring base has gotten customers' demand. Costs of raw material and production increased because of changed environment of industry. Tropical timber such as Red Meranti (Shorea acuminate) used for raw material of the floor has been depleting beside countries in South Eastern Asia changed species of afforestation. As a result, it gets hard to secure good quality of raw material for plywood. Moreover plywood price is increased suddenly after earthquake in Japan. Eucalyptus (Eucalyptus globulus) in china has been using for raw material as a countermeasure of changed environment of industry. In this study, possibility of using flooring consisted of Eucalyptus veneer as crossband layers was checked by deflection experiments. Flooring consisted of Red Meranti was used for comparison. Two factors which impact on deflection are a type of density gradient and density difference between Long-grain veneer and Short-grain veneer. Red Meranti samples are M type of density gradient on the other hand Eucalyptus samples are W type of density gradient. The more samples have high density difference, the more deformation was checked. A sample which has big density difference between core and cross bands layer warp more also deform. Flooring was deformed smaller than plywood and samples which have big density difference was deformed more.

• Journal of Korea Water Resources Association
• /
• v.34 no.2
• /
• pp.141-154
• /
• 2001

An experimental study was performed to investigate the effects of levee crest width and the slope steepness on levee break due to overtopping flow. The phenomenon of bank failure can be described in 4 stages. In this study, the magnitudes of breach width, breach depth peak discharge, and scouring shape at the break site were measured, and the result shows that peak discharge will be reduced and breach duration extended by widening the crown width and lessening the levee slope steepness. The breach width was narrower and the breach depth deeper, as the levee crest width become wider or the slope steeper. And, the bed scour depth was deeper and steeper, as the levee crest crest width become narrower or the slope milder.