• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.151-157
• /
• 2020

This study is to find out the effectiveness by Infant CPR method of a single rescuer. It was conducted for 51 general public. And typical infant CPR method by a single rescuer and a new method, CPR with two thumb chest compressions wrapped in both hands over the head were compared. SPSS 22.0 was used as an analysis method and to compare the both CPR methods, Paired t-test was used. As a result of the study, the average chest compression depth(39.38±1.07 mm) by CPR with two thumb chest compressions wrapped in both hands over the head was significantly high(p<0.001). Ease of mouth-to-mouth resuscitation(p<0.001), convenience of CPR method(p<0.001), and finger pain level(p<0.001) had a significant difference. As for the preference of the CPR method, 80.4%(41 people) preferred CPR with two thumb chest compressions wrapped in both hands over the head. In this study, CPR with two thumb chest compressions wrapped in both hands over the head showed more effective results than typical CPR method. However, as a virtual study using mannequins, further research is needed to apply high-quality CPR methods to field.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.184-190
• /
• 2012

Purpose: The purpose of this study was to measure the absorbed dose and to calculate the effective dose for one periapical radiography using the portable and wall type dental X-ray machines. Materials and methods: Thermoluminescent chips were placed at 25 sites throughout the layers of the head and neck of a tissue-equivalent human skull phantom. The man phantom was exposed with the portable and wall type dental X-ray machines. For one periapical radiography taken by portable dental X-ray machine, the exposure setting was 60 kVp, 2 mA and 0.2 seconds, while for one periapical radiography taken by wall type dental X-ray machine, exposure setting was 70 kVp, 8 mA and 0.074 seconds. Absorbed dose measurements were performed and equivalent doses to individual organs were summed using ICRP 103 to calculate effective dose. Results: In the upper anterior periapical radiography using portable dental X-ray machine and in the lower posterior periapical radiography using both machines, the highest absorbed dose was recorded at the mandible body. The effective dose in upper anterior periapical radiography using portable and wall type dental X-ray machines was $4{\mu}Sv$, $2{\mu}Sv$, respectively. In the lower posterior periapical radiography, the effective dose for each portable and wall type dental X-ray machines was $6{\mu}Sv$, $2{\mu}Sv$. Conclusion: It was recommended that the operator use prudently potable dental X-ray machine because that the effective dose in the periapical radiography using wall type dental X-ray machine was lower than that in the periapical radiography using portable dental X-ray machine.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.17-25
• /
• 2012

Purpose: Recently, a three dimensional approach to hard and soft tissues of the maxillofacial area has been widely used. This study was to evaluate the reproducibility and accuracy of a stereocamera compared to actual measurement methods using a digital caliper and digitizer. Methods: The stereoscopies of 7 head dummies with different sizes and shapes were obtained using a Di3D system (Dimensional Imaging, Glasgow, UK) after marking reference points on facial areas. From the obtained stereoscopy, 10 measurements representing the width, height and depth of each of the facial sections of the dummy were measured twice using a three dimensional reverse engineering software program (RapidForm$^{TM}$ 2006, Inus, Seoul, Korea). The x, y, and z coordinates of each of the three dimensional measurements were obtained and distances between two points were calculated. All procedures were repeated twice. The actual measurement method was performed twice, directly on dummies, using a digital caliper and values were compared with the previously determined values. Results: The results were as follows. In the ANOVA analysis, there were no significant statistical differences among the three measurement methods. In the Bonferroni analysis, with adjustments applied for multiple comparisons, there was no difference between actual measurement methods using a digitizer and a digital caliper. However, there was some difference between using a stereocamera and actual measurement methods using a digitizer and a digital caliper in values of $Ex_{Rt}-Ex_{Lt}$, $En_{Rt}-En_{Lt}$, $Ala_{Rt}-Ala_{Lt}$, $Ch_{Rt}-Ch_{Lt}$, G-Pg', $Ala_{Rt}$-Prn, $Ala_{Rt}$-Prn. The mean value for technical error in measurement (TEM) in Di3D (0.98 mm) was slightly higher than for a digital caliper (0.17 mm) and a digitizer (0.30 mm). In an intraclass correlation coefficient (ICC) there were no significant differences among the three measurement methods, but the Di3D system with the stereocamera showed relatively lower reproducibility compared to actual measurement methods using a digitizer and a digital caliper. Conclusion: These results indicate that some complementary measures may be needed to improve accuracy and reproducibility in the Di3D system with stereocamera.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.113-118
• /
• 2017

The purpose of this study was to compare the ventilatory volume and airway pressure using Oxylator EM-100, MicroVenT CSI-3000, OXY-LIFE II. The data were obtained from February 13 in 2017 andanalyzed using the SPSS WIN 18.0 program. The results of theventilatory volume showed the Oxylator EM-100 551.44 ml (${\pm}18.70$), MicroVenT CSI-3000 527.26 ml (${\pm}17.98$), and OXY-LIFE II 369.46 ml (${\pm}12.30$). The airway pressure showed the Oxylator EM-100 $11.89cmH_2O$ (${\pm}.41$), MicroVenT CSI-3000 $11.66cmH_2O$ (${\pm}.34$), and OXY-LIFE II $8.02cmH_2O$ (${\pm}.25$). This study will provide the basic data for an appropriate ventilation method by an oxygen supply device including Oxylator EM-100, MicroVenT CSI-3000, and OXY-LIFE II.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.312-321
• /
• 2013

The purpose of this study was to develop a scenario suited for our clinical situations and evaluate the application possibility by evaluating students' problem solving ability and learning satisfaction in simulation learning. This study consisted of contents which could be applied for varied situations such as complications and symptoms related to liver cirrhosis, looking into hyperkalemia symptoms of patients with liver cirrhosis in emergency unit. The stage of developing scenario was organized in the order of setting simulation learning objectives and situations of scenario, making algorithm, writing checklists of clinical performance appraisal, and debriefing. The scenario was constructed with monitor setting(actions), patient/mannequin(actions), expected interventions(events), and cues in chronological order, according to the scenario progression outline of Jeffries (2007). The scenario was used in 2011, consisting of 4-5 people per group of 53 senior nursing students who registered for 'clinical performance appraisal' course. The problem solving ability improved from a score of 4.05 before simulation learning to a score of 4.30 after simulation learning (t=-3.97, p<.001). The score for learning satisfaction after the simulation learning was high (4.09/5). Considering that simulation learning encouraged students to be the main body of class, this learning method can be the effective way of nursing education.

• Archives of design research
• /
• v.12 no.4
• /
• pp.294-303
• /
• 1999

With the breakthrough development of computing environment, the design phases have been changed a lot nowadays. In the case of prior phases of transportation design such as cars and forklift-trucks design, designers have depended on surveys and 2D line drawings for fixing a product layout and extracting ergonomic data. In this method, designers don't meet only the problem of reliability of measuring data but also, the problems of unknown situation of operators' fatigue and comfort in work situation. In these methods, it has much less creditability to have a 2D human model to check the real world motion due to the limitation of the 3 Dimension. Even though with a 2D human model, perfect layout is determined, it is still difficult to measure about comfort and fatigue for a user because it measuring an analysing method is static. The development of computer hardware and software have not only changed the flow in the social-wide range but also immerged design into Virtual Environment. In conventional design method, visualization and data transferring have been the main issues but, in virtual environment, determining of design layout and analysing ergonomic data with sophisticated feeling about comfort and fatigue are possible by using 3D virtual human. In this study, the general characteristics of virtual environment was discussed and the possibility of digital process of design was treated. For these studies, layout design for forklift-trucks was tested. Eventually, the merits of each design phase applied virtual environment are discussed.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.493-499
• /
• 2009

응급의료에 관한 법률에 따라 구조 및 응급처치에 관한 교육의 대상자로 일반시민인 구급차등의 운전자, 여객자동차운송사업용 자동차의 운전자, 보건교사, 경찰공무원 등에게 심폐소생술 교육을 실시하여 26,900명이 과정을 수료(한국, 2007)하였으나 초중고 학교 교과과정 중에는 체계적인 응급처치 교육이 없고 교육강사, 교육장비 등이 취약(한국, 2005)하여 교육체계의 확립이 필요한 실정이다. Kerschaver 등(1989)은 학생들을 대상으로 심폐소생술 훈련을 하는 것은 효과적이고 11살 부터 단순화한 내용으로 보다 쉽게 교육을 시작할 수 있을 것이라고 했으며 Lester 등 (1996)은 지식과 술기 능력 간에는 상관이 없으나 중학교 1학년 때가 적절한 훈련시기라고 했고 Urey 등(2003)은 의무과목으로 6-7살 초등학생을 위한 응급처치 프로그램, Lubrano 등(2005)은 8-11살 학생을 대상으로 하는 응급처치 교육 프로그램의 운영을 보고했다. 박 등(2006)은 초등학교 5-6학년 학생과 성인 간의 심폐소생술 교육 효과를 분석하여 학생군이 과정에 대한 이해는 우수했으나 술기에서는 적절한 흉부압박이 미흡했다는 결과를 제시하여 초등학생을 대상으로 하는 이론 교육이 효과가 있었으나 실습 교육은 체격에 제한을 받는다는 점을 시사했다. 체격은 물리적으로 측정, 확인할 수 있는 사람 몸의 상태로써 성별, 키, 몸무게 등의 전체적인 것과 각 부위의 크기, 모양, 비율 등의 부분적인 것으로 구분할 수 있으나 여기서는 키, 몸무게가 흉부압박에 영향을 끼쳤다고 볼 수 있다. 따라서 본 연구에서는 초등학교 6학년 학생을 대상으로 체격조건(키, 몸무게)과 성인 마네킨 흉부압박 깊이 간의 상관관계를 밝히고 회귀식을 도출하여 효과적인 심폐소생술이 가능한 대상을 제시하고자 한다.

• Journal of agricultural medicine and community health
• /
• v.44 no.3
• /
• pp.124-137
• /
• 2019

Objectives: The purpose of this study was factors affecting self-efficacy of cardiopulmonary resuscitation (CPR) in adults. Therefore, the provide basic data for strategy development to improve the performance rate of bystander CPR. Methods: The data were collected from 164,165 adults of the 2016 Korean Community Health Survey. The survey method was 1:1 interview with households, and the survey period was from August 16, 2016 to October 31, 2016. The survey variables were as follows: self-efficacy of CPR, awareness of CPR, training experience of CPR, demographic characteristics, medical characteristics, health promoting behaviors, and safety practices. Results: The rate of self-efficacy of CPR in adults was 60.6%. Factors affecting self-efficacy of CPR were age, sex, residence, education level, occupation, marital status, any CPR training, CPR training within the last 2 years, CPR training with manikin within the last 2 years, emergency room visit within the last 1 year, physical activity status, drive a bicycle, seat belts on rear seat, seat belts when riding a bus were statistically significant. Conclusions: In conclusion, in order to improve the self-efficacy of CPR in adults, the recent experience rate of CPR education, the practice rate of health promotion behavior, and the practice rate of safety behavior should be improved. The government should expand the provision of education programs to improve the self-efficacy of CPR and actively prepare national-level public advertisements strategies.