• Journal of Information Technology Application
• /
• v.3 no.4
• /
• pp.63-92
• /
• 2001

This paper makes an attempt to look at the process of automatically generating an application software system based on the Entity-Relationship (E-R) model. Basically, the process consists of five steps as follows: First, the designer develops an E-R model of an real-world system. Second, the software generator automatically generates a stereo-type application system. Third, the generator produces database schema and link information between application programs. Fourth, the designer designs the user interface including menu, screen design and so on. Finally, the generator completes the process integrating all the elements of an application system. Five basic program generation rules, three extended rules and a database generation rule have been suggested. By following each rule with the generator, the designer can build an application with an extremely efficient manner compared with traditional approaches. A case study has been included in order to show the applicability of the automated software generation process suggested in this paper. It has been demonstrated from the case study that the idea of applying an automated generator in systems development based upon the E-R model worked well.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.110-118
• /
• 2007

In multi-hop wireless network, multi-channel makes it possible to enhance network performance because it reduces channel interferences md contentions. Recently several schemes have been proposed in the literatures to use multi-channel. Especially, MCR(Multi channel routing protocol), which utilize hybrid interface assignment, is a prominent routing protocol. MCR uses simple way to change channel but efficiently reduce channel interferences. In this paper, we propose a load-aware channel selection algorithm called LCS that enhances the channel switching algerian used in MCR protocol. In LCS, channel of a node is assigned based on collected information about queue length of neighbors. Moreover this paper evaluates the performance of in by using simulation test and testbed demonstration. Test results show that the MCR with LCS outperforms the naive MCR.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.33-39
• /
• 2010

In this paper, a 5Gb/s receiver with an adaptive equalizer for serial link interfaces is proposed. For effective gain control, a least-mean-square (LMS) algorithm was implemented with two internal signals of slicers instead of output node of an equalizing filter. The scheme does not affect on a bandwidth of the equalizing filter. It also can be implemented without passive filter and it saves chip area and power consumption since two internal signals of slicers have a similar DC magnitude. The proposed adaptive equalizer can compensate up to 25dB and operate in various environments, which are 15m shield-twisted pair (STP) cable for DisplayPort and FR-4 traces for backplane. This work is implemented in $0.18-{\mu}m$ 1-poly 4-metal CMOS technology and occupies $200{\times}300{\mu}m^2$. Measurement results show only 6mW small power consumption and 2Gbps operating range with fabricated chip. The equalizer is expected to satisfy up to 5Gbps operating range if stable varactor(RF) is supported by foundry process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.964-970
• /
• 2013

This paper presents a bandpass wireless 3-D chip to chip interface technique. The proposed technique uses direct amplitude modulation of the free running oscillator which especially utilizes the coupling capacitance between two stacked chips as a part of the resonator. Therefore, the oscillator is three dimensionally configured and a simple envelope detector can be used as a receiver without any additional matching circuitry. The proposed link was designed and fabricated using 110 nm CMOS technology and experimental results successfully showed the data transmission at a data rate of 2 Gb/s for the stacked chips with a thickness of 50 ${\mu}m$ consuming 4.32 mW. The sizes of the Tx and Rx chips are 0.045 $mm^2$ and 0.029 $mm^2$, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.386-396
• /
• 2003

Recently, mobile communication systems have supported various services including internet from voice centric service as they evolve toward 3G. To accommodate the increasing number of users, an AAL2 multiplexing scheme is introduced in the UTRAN tub interface for link efficiency. However, limited radio resources and different requirements of various services make it difficult to guarantee the QoS requirements at radio access networks. The conventional AAL2/ATM multiplexing systems focused on the multiplexing efficiency of voice anddata services and QoS issues of real time and non real time services. In this paper, we classfy various services according to QoS requirements and propose AAL2/ATM multiplexing schemes using statistical multiplexing and scheduling with a rather simple structure to guarantee the given requirements. Simulation results show that the proposed schemes perform better than the conventional schemes to guarantee QoS requirements of various services.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.494-503
• /
• 2003

The IEEE 1394 High Speed Serial Bus is a versatile, high-performance, and low-cost method of promoting interoperability between all types of A/V and computing devices. IEEE 1394 provides two transfer modes: asynchronous mode for best effort service and isochronous mode for best effort service with bandwidth reservation. This paper shows the bus performance and compared the transfer odes first at the link level and then at the application level. For the application level performance, we analyze the bus systems with fixed and adaptive interfaces, applied between the upper layer and the 1394 layer, using polling systems. Also we verifies the analysis models with simulation studies. Based on our analysis, we conclude that the adaptive interface reduces the bus access time and so increases the bus utilization.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.45-52
• /
• 2019

This paper proposes the design of a closed-loop stepping motor drive for real-time Ethernet (RTE), which can be easily applied to a variety of RTE protocols. The proposed design is divided into a closed-loop step motor drive which can be reused for various types of RTE protocol and RTE module developed for each specific RTE protocol. It is based on a layered architecture so that the motion control algorithm can be easily reused independently of the RTE protocol and motion profile. To verify the proposed design, closed-loop motor drives based on EtherCAT and Mechatrolink III were developed and their performances were evaluated. Cycle time was measured to verify the real-time communication performance of the developed EtherCAT and Mechatrolink III based motor drive. As a result, the EtherCAT was 7.5 times faster than the Mechatrolink III when 32 motor drives were connected.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.65-69
• /
• 1998

기존에 사용자 인터페이스 디자인 개발시 다양한 사용자 니즈들이 수집되고 이러한 정보들의 효과적 활용을 위하여 여러 가지 분석방법들이 활용, 개발되고 있다. 그중 Video Ethnography는 특정 시스템 상에서 나타나는 사용자의 행동을 중심으로 한 환경내의 변화를 비디오를 이용해 저장하고 저장된 상황 의 변화요인을 해석 체계에 의거해 분석하는 기법이다. 이는 기존의 다른 방법에 비해 사용자의 자연스 러운 작업의 수행을 분석하는 데 초점을 맞추고 있기 때문에 실험실에서 행해지는 계획된 실험에서 얻 을 수 없는 시스템에 관한 발견점을 찾아낼 수 있다는 장점이 있다. 하지만 현재 Video Ethnography를 수행하는 과정에서 수집된 사용성 정보들이 총체적인 관점에서 체계적으로 관리, 분석되지 못하고 있고, 관리 시스템의 부재로 인하여 비디오 데이터를 분석, 관리하는데 필요이상의 시간과 노력이 필요한 실정 이다. 본 연구에서는 이러한 어려움을 해결하고자 Video Ethnography를 통해 얻어진 사용자 니즈를 체 계적으로 수집,해석, 관리하는 효과적인 도구의 개발에 중점을 두었다. 특정한 사용상황에 맞추어 수집 된 다양한 형태의 사용자 니즈들은 먼저 컴푸터를 통해 입력되고 입력된 데이터는 과업의 목적, 주변상황, 시스템과 사용자와의 상호작용 등 다양한 변수에 의해 분석된다. 이러한 분석의 과정을 통해특정 시스템 에 대한 사용자의 니즈가 도출되고 새로운 디자인 해결안이 제시될 수 있는 것이다. 이러한 일련의 과정 은 사용자 니즈 데이터베이스로 구축되며 추후 제품 개발의 근거로서 활용될 수 있다. 앞으로 다양한 사 용환경에 대한 사용자 니즈 데이터베이스가 확충되면 각 사용상황하의 사용성 문제 해결안뿐만 아니라 서로 관련이 있는 사용상황간의 연계 연구를 통해 좀 더 광범위한 개념의 제품 개발도 가능해 질 수 있을 것이다.와 만족도와의 관계 및 이상형에 대해 구체적으로 파악할 필요가 있다. 또한, 신체에 대한 이상형은 시대의 여러 여건에 따라서 변화할 수 있으므로 의복 착용자가 의복을 통해서 표현하고자 하는 이상형의 시대적 변화를 살펴볼 필요가 있다. 따라서 본 연구에서는 신체에 대한 인식도 및 만족도, 이상형에 대한 설문지 조사와 신체측정을 통하여 신체 크기에대한 만족도를 객관적인 척도로 고찰하고, 이상형과 실제 체형에 관하여 고찰하고자 한다. 도한, 1992년도 자료와의 비교를 통하여 시대에 따른 신체만족도와 이상형의 변화를 파악하고자 한다. 이를 기초로 한 의복원형 제작 및 의복 디자인에 대한 연구를 통해 의복의 맞음새가 좋을뿐만 아니라 의복착용자들 에게 심리적 만족을 줄 수 있는 의복 제작에 도움이 될 수 있을 것이다.적입지로 분석되었다.등 다양한 모형들을 고려해 본 뒤, 적절한 모형을 적용할 것이다. 가로망 설계 모형에서 신호제어를 고려하기 위해서는 주어진 가로망에 대한 통행 배정과정에서 고려되는 통행시간을 링크통행시간과 교차로 지체시간을 동시에 고려해야 하는데, 이러한 문제의 해결을 위해서 최근 활발히 논의되고 있는 교차로에서의 신호제어에 대응하는 통행배정 모형을 도입하여 고려하고자 한다. 이를 위해서 지금까지 연구되어온 Global Solution Approach와 Iterative Approach를 비교, 검토한 뒤 모형에 보다 알맞은 방법을 선택한다. 차량의 교차로 통행을 고려하는 performance function의 경우 비신호 교차로와 신호교차로에 대한 적절한 비교가 현재로서는 고려되고 있지 못하기 때문에, 구성되는 가로망의 경우 신호교차로들로만 구성되며, 부득이한 경우 입체교차의 형태로 구성되는 것으로 가정한다. 실제 가로망의 경우, 교통향이 많은 도시부의 경우 주가로망은 대부분 신호교차로와 입체교차로 구성되기 때문에

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.613-619
• /
• 2017

In this paper, DF(Dual Fuel) Generator modeling, which uses both conventional diesel fuel and LNG fuel, has been performed and monitoring system has been developed based on MATLAB/SIMULINK for the development of PMS(Power Management System) HILS(Hardware In the Loop Simulation). The principal components modeling of DF Generator are DF engine which provides the mechanical power and synchronous generator which convert the mechanical power into electrical power. Submodels, such as throttle body, intake manifold, torque generation and mass of LNG and diesel Quantity are used to perform DF engine. Also, governor is used for load sharing between paralleled DF generators to share a total load that exceeds the capacity of a single generator. To verify modeling of DF Generator designated ship lumped load Simulation is carried out. A validity of DF Generator has been verified by comparison between simulation results and estimated result from the designated lumped load.

• Management & Information Systems Review
• /
• v.36 no.4
• /
• pp.129-148
• /
• 2017

Conventional exhibition management information systems recommend tourist attractions that are close to the place in which an exhibition is held. Some recommended attractions by the location-based recommendation could be meaningless when nothing is related to the exhibition's topic. Our goal is to recommend attractions that are related to the content presented in the exhibition, which can be coined as content-based recommendation. Even though human exhibition curators can do this, the quality is limited to their manual task and knowledge. We propose an automatic way of discovering attractions relevant to an exhibition of interests. Language resources are incorporated to discover attractions that are more meaningful. Because a typical single machine is unable to deal with such large-scale language resources efficiently, we implemented the algorithm on top of Apache Spark, which is a well-known distributed computing framework. As a user interface prototype, a web-based system is implemented that provides users with a list of relevant attractions when users are browsing exhibition information, available at http://bike.snu.ac.kr/WARP. We carried out a case study based on Korean Tourism Organization Linked Open Data with Korean Wikipedia as a language resource. Experimental results are demonstrated to show the efficiency and effectiveness of the proposed system. The effectiveness was evaluated against well-known exhibitions. It is expected that the proposed approach will contribute to the development of both exhibition and tourist industries by motivating exhibition visitors to become active tourists.