• Title/Summary/Keyword: 링크식

Search Result 257, Processing Time 0.058 seconds

포준지체식 파라메터 조정을 통한 동적 통행배정모형에서 링크성능함수의 최적화에 관한 연구

  • 김욱경
    • Proceedings of the KOR-KST Conference
    • /
    • 1998.10a
    • /
    • pp.41-41
    • /
    • 1998
  • ITS틀 내의 한 분야인 도로교통정보체계 (ATIS: Advanced Traveler Information system)는 실시간 교통정보를 운전자에게 직접 제공하는 것으로서, 이를 위해 매 순간마다 가로망에 배정되는 교통량 및 통행시간을 예측할 수 있는 범용의 동적 통행배정모형(dynamic route choice model)의 개발이 필히 수반되어야 한다. 본 연구에서는 ITS사업에서 필수적으로 수반되어야 할 최적 제어이론에 의한 동적 통행 배정모형을 ATIS의 핵심 소프트웨어로 응용하기 위해 기존 연구성과를 발판으로, 순간 동적 통행 배정모형(Ran, Boyce &LeBlanc, 1993)의 통행제약조건인 링크통행함수, 특히, 과부하 시 엘켈릭의 일반식의 파라메터를 조정, 적용하여, 서울시 강남지역의 실제 가로망의 사례연구를 통해 지체식의 각각의 파라메터에 따른 결과를 O/D에 따른 통행시간, 링크통행시간, 혼잡도를 중심으로 비교 평가하여, ATIS의 핵심 소프트웨어로서 순간 동적 통행배정을 통해 보다 현실여건을 잘 반영할 수 있는 링크 통행 성능 함수를 도출하였다.

  • PDF

Link-wirelength-aware Topology Generation for High Performance Asynchronous NoC Design (링크 도선 길이를 고려한 고성능 비동기식 NoC 토폴로지 생성 기법)

  • Kim, Sang Heon;Lee, Jae Sung;Lee, Jae Hoon;Han, Tae Hee
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.53 no.8
    • /
    • pp.49-58
    • /
    • 2016
  • In designing heterogeneous architecture based application-specific network-on-chips (NoCs), the opportunities of performance improvement would be expanded when applying asynchronous on-chip communication protocol. This is because the wire latency can be configured independently considering the wirelength of each link. In this paper, we develop the delay model of link-wire-length in asynchronous NoC and propose simulated annealing (SA) based floorplan-aware topology generation algorithm to optimize link-wirelengths. Incorporating the generated topology and the associated latency values across all links, we evaluate the performance using the floorplan-annotated sdf (standard delay format) file and RTL-synthesized gate-level netlist. Compared to TopGen, one of general topology generation algorithms, the experimental results show the reduction in latency by 13.7% and in execution time by 11.8% in average with regards to four applications.

Static and Structural Analyses of the Link of a Double-Action Link-Type Hydraulic Die Set (폐쇄단조용 복동링크유압식 다이세트의 링크의 정역학적 해석과 구조해석)

  • Eom, Jae-Gun;Jun, Byoung-Yoon;Joun, Man-Soo
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.23 no.10
    • /
    • pp.96-102
    • /
    • 2006
  • This paper presents the mechanics of the link of a double-action link-type hydraulic die set for the enclosed die forging. Operational principle of the die set in the enclosed die forging is introduced with emphasis on force transmission from the press and the hydraulic system to the material through links, die components and punches. The force exerted on the link is statically investigated and its structural analysis is carried out. The analyzed results are discussed to be used for design of the link system.

Reverse-Link Performance of Synchronous Cellular DS-CDMA Networks in Dispersive Rician Multipath Fading Channels (디스퍼시브 리시안 다중경로 페이딩 채널에서 동기식 셀룰라 DS-CDMA, 네트워크의 역방향링크 성능)

  • Hwang Seung-Hoon;Hanzo Lajos
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.9A
    • /
    • pp.722-728
    • /
    • 2005
  • In this paper, the reverse-link performance of synchronous DS-CDMA cellular networks is investigated in Rician multipath fading environments. The system's performance is evaluated in terms of the achievable average bit error rate BER) and the user capacities of two different network layouts, namely those of a uniform grid of hexagonal multiple cells and a single isolated cell. In the multiple-cell scenario, the impact of the other cells' interference on the attainable capacity of the synchronous DS-CDMA uplink is investigated. Upon comparing both networks to a conventional asynchronous CDMA system, we demonstrate an achievable user capacity gain of $25\%$ to $56\%$ for synchronous uplink transmissions over that of the corresponding asynchronous transmission scenario at BER = $10^{-3}$.

민간항공용 데이터링크 기술동향

  • Bae, Jung-Won;Kim, Tae-Sik;Jeon, Hyang-Sik;Nam, Gi-Uk
    • Current Industrial and Technological Trends in Aerospace
    • /
    • v.4 no.2
    • /
    • pp.13-24
    • /
    • 2006
  • 국제민간항공기구(ICAO)의 차세대 항행시스템(new CNS/ATM) 전환계획에 따라 전 세계적으로 항공통신, 항법, 감시 및 항공교통관리 분야의 항행안전시설과 대응되는 항공기 탑재시스템의 변화가 진행되고 있다. 특히 항공통신과 감시 분야에서는 공대지 데이터링크 기술을 활용한 새로운 항공교통서비스(CPDLC, ADS, ADS-B, FIS-B, TIS-B)가 도입되어 공역 처리능력을 제고하고 항공운항 안전에 기여하며 조종사와 관제사의 편의성을 대폭 향상시킬 것으로 기대되고 있다. 현재 민간항공에서 활발히 이용되고 있는 대표적인 데이터링크 기술인 ACARS 시스템은 국제민간항공기구가 표준화하여 제정한 VDL 기술로 대체되고 있으며 HFDL, Mode S, AMSS, UAT 등이 현재 가용한 데이터링크 기술로 개발되어 활용되고 있다. 미국과 유럽을 중심으로 관련 기술에 대한 검증과 시범 운용 사업이 활발하게 진행되고 있으며 2020년 이후를 대비한 미래 항공통신 신기술 연구에도 세계가 매진하고 있다. 본 논문에서는 현재까지 개발된 공대지 데이터링크 기술의 특성을 개관하고 관련 응용기술 구현 현황과 데이터링크 관련 세계의 미래 통신기술 연구 동향을 제시하고자 한다.

  • PDF

A Study on Performance of Reverse Link Synchronous DS-CDMA System in Multiuser Environment (다중 사용자 환경에서 역방향 링크 동기식 DS-CDMA 시스템의 성능에 관한 연구)

  • 강성진;박진홍;강병권;김선형
    • Proceedings of the Korea Institute of Convergence Signal Processing
    • /
    • 2000.08a
    • /
    • pp.61-64
    • /
    • 2000
  • 본 논문에서는 cdma2000 규격을 채용한 역방향 링크 동기식 DS-CDMA 시스템을 시뮬레이션 하여 시스템의 성능을 분석하려다 cdma2000 시스템은 기존의 IS-95와는 달리 Pilot 채널을 이용하여 페이딩 채널을 추정하고 이를 이용하여 채널 환경에 의한 수신신호의 위상변화를 보상해 준다. 채널 추정필이 31pcg 심볼에서 Pilot 채널과 Traffic 채널의 최적의 전력비를 구하였다. 또한 시스템에 Power Control을 적용하여 Target FER을 만족시키기 위한 required Eb/No를 구하였고, 서로 다른 데이터율의 사용자가 동시에 전송할 때의 성능을 분석하였다.

  • PDF

CEO Interview-티켓링크 우성화대표

  • Korea Venture Business Association
    • Venture DIGEST
    • /
    • s.52
    • /
    • pp.4-5
    • /
    • 2004
  • 백조가 호수 위에서 우아한 포즈를 연출하기 위해 물밑에서 필사적으로 발버둥을 치고 있는 것처럼 우리나라 문화산업이 이만큼 성장하는데 있어 안 보이는 곳에서 노력을 아끼지 않은 사람들이 있다. 그 중 문화포탈 티켓링크의 우성화 대표를 빼놓을 수 없다. 선진 예매문화를 통해 국민과 문화를 조금 더 가깝게 만드는데 기여한 우대표의 사업에 대한 열정은 식을 줄을 모른다.

  • PDF

Development of cabinet type Link Box (케비넷형 링크박스의 개발)

  • Kim, H.J.;Nam, J.S.;Lee, S.H.;Jeong, S.H.
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.1469_1470
    • /
    • 2009
  • 기존의 링크박스는 대부분 직매식으로 수침투 방지를 위해 케이스와 뚜껑 사이에 가스켓을 넣고 볼트로 체결하는 방식으로 사용하여 왔다. 이는 링크박스 유지보수 시 매번 볼트를 체결하고 해체하는 작업이 반복되어 현장 작업성이 떨어졌다. 이에 링크박스를 지상에 설치하며, 볼트의 사용을 최소화함으로써 유지보수 시 작업이 용이한 케비넷형 링크박스를 개발하였으며, 개발된 제품에 대해 전기적, 기계적 성능 시험을 수행하여 그 성능을 검증하였다.

  • PDF