• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.3
• /
• pp.147-159
• /
• 2015

One of the most important factors for the consumers to select a coffee shop is a visual factor. The analysis results of interior pale face image of the coffee house doesn't show significant differences on all the categories. It is recognized that the items affected by symbolized color are supplies and interior design. If a respondent choose a coffee house by the symbolized color, 'Starbucks' is the most memorable or want to visit place, and only one category, pocket money shows significant difference in choosing coffee houses. The investigation results say that the most memorable or want to visit coffee house by the visual icon color are 'Starbucks', 'Angelinus' and 'Caffebene', and that 'Ediya's icon color marks the characteristics of the shop very well, and 'Hollys' has the most characterful color. Resultingly, visual elements and icon colors of the shop seriously affect consumer's choice in visiting a coffee house. This study is to understand the influence of visual elements in choosing a coffee house for general customers, and it is considered that the importance of visual elements and color marketing must be recognized and developed.

• Journal of the Korean Society of Radiology
• /
• v.4 no.4
• /
• pp.37-40
• /
• 2010

In this paper, transport properties of charge carrier which is produced by x-ray exposure were investigated.. It is the research of charge transport and specific property of trap that is performed in direct digital x-ray image receptor. We measured transit time and drift mobility of charge carriers of a-Se photoconductor using time-of-flight method. We made a testing glass with a-Se of $100{\mu}m$ thickness on corning glass using thermal evaporation method. As a result of this experiment, electron and hole transit time was each $229.17{\mu}s$ and $8.73{\mu}s$ at $10V/{\mu}m$ electric field and drift mobility was each $0.00174cm^2/V{\cdot}s$, $0.04584cm^2/V{\cdot}s$. But the results shows us different measurement value of electron and charge drift mobility and it was investigated about charge transport properties and trap mechanism.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.86-96
• /
• 2011

In this paper we propose a Pre-rake system applied with a frequency domain equalizer in TDD/CDMA multi-code transmission. The Pre-rake system has been well known technique in TDD/CDMA to make a receiver simple. However, it still has residual losses of path diversity and signal to noise ratio (SNR). However, gathering all the residual paths demands an additional hardware such as a rake combiner at the receiver. For the reason Pre/Post-rake system has already been proposed at up/downlink correlated channel conditionunder the assumption of noisier channel. There is a trade-off between the first purpose of Pre-rake that makes hardware simple at the receiver and the performance improvement. From the point the frequency domain equalizer (FDE) can be considered in Pre/Post-rake to supply the receiver with the flexible equalizing methods with rather reduced complexity compared with time domain rake combiner or equalizers. Pre-rake itself increases the number of multipath, which results from the convolution of Pre-rake filter and wireless channel, and FDE must be well matched to Pre/Post-rake, while it considers the relationship of hardware complexity and the performance. In this paper, the Pre-rake/Post-FDE system is introduced at TDD/CDMA multi-code transmission. In addition, the cyclic prefix reduction method in the proposed system is introduced, and the theoretical analysis to the proposed system is given by assuming Gaussian approximation, and finally the numerical simulation results are provided.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.17-24
• /
• 2006

A demonstration facility for advanced spent fuel conditioning process (ACP) is under construction in KAERI. In this hot cell facility, all process equipments and materials are taken in and out only through the rear door. The working table in front of the process rear door is specially designed to be openable for the efficient use of the space. This paper presents the structural safety analysis of the openable working table, for the normal operational load condition and accidential drop condition of heavy object. Both cases are investigated through static and dynamic finite element analyses. The analysis results show that structural safety of the working table is sufficiently assured and the working table is not collapsed even when an object of 500 kg is dropped from the height of 50 cm.

• Archives of design research
• /
• v.15 no.4
• /
• pp.177-188
• /
• 2002

A thousands of chairs have designed from the Victorian era to the present. Thonet's Nol4 chair in 1859, Wright's high-back chair in 1904, Ritveld's red/blue chair in 1917, Breuer's Wassily chair in 1925, Aalto's Paimio chair in 1932, Eames's DAR chair in 1948, Piero Gatti's Sacco chair in 1969, Starck's Von Volgelsang chair in 1984, Stumpf's Aeron Chair in 1992, Little's 'Coat of arms' chair in 1994 - the list of architects who have seized the opportunity to express their theories in the design of a chair is seemingly endless. Architects such as Machintosh(1868-1928), Wright(1807-1959), Aalto(1898-1976) included chairs within their artistic schemes for interiors and buildings. But as the manufacture of chairs moved away from the domain of the craftsman towards that of the industrial process, architects were also ideally positioned, with their background knowledge of engineering, to pioneer innovative chair design within the constraints of modern manufacturing technology. Beyond matters of function and structure, the fundamental worth of chairs, past or present, lies in their communication of attitudes, ideas and values. The persuasiveness of a chair depend on the clarity of its rhetoric. Chair has become an ideal medium for designers to make their visual statements and construct their individual manifestos. In chair design there is a ping-pong game played out between absurd and useful design, and this game is one way in which the design profession explores itself.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.293-304
• /
• 2017

This study was performed in order to hydrogeological analysis of aquifer, which is a necessary part for evaluating the efficiency of the combined well and open-closed loops geothermal (CWG) systems. CWG systems have been proposed for the effective utilization of geothermal energy by combining open loop geothermal systems and closed loop geothermal systems. Small aperture CWG systems and large aperture CWG systems were installed at a green house land with water curtain facilities in Chungju City. Aquifer tests include pumping tests and step-drawdown tests were conducted to analyse hydrogeological characteristics of aquifer in the study area. The transmissivity was estimated in the range of $13.49{\sim}58.99cm^2/sec$, and the storativity was estimated in the range of $1.13{\times}10^{-5}{\sim}5.20{\times}10^{-3}$. The geochemical analysis showed $Ca^{2+}$ ion and ${HCO_3}^-$ ion were dominant in groundwater. The Langelier Saturation Index and the Ryznar Stability Index showed low scaling potential of groundwater. In the analysis of vertical water temperature change, the geothermal gradient was estimated as $2.1^{\circ}C/100m$, which indicated the aquifer was enough for geothermal systems. In conclusion, groundwater is rich, can stably use geothermal heat, and it is less likely to cause deterioration of thermal energy efficiency by precipitation of carbonate minerals in study area. Therefore, the study area is suitable for installation of the combined geothermal system.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.1-7
• /
• 2008

The paper is to solve the problem of existing sound system, which has difficulties of system organization and the increase of additional install cost and unfriendly interior. To solve the existing system, we drew the new sound system based on PLC and studied it. A transmitter and a receiver were designed using the PLC chip INT5500CS. Sound system was configured with a CD player that sound signals are sent from the transmitter and a speaker connected to the receiver. For analysis of characteristics of this system, a USBPre external sound card and Smaart Live 5 which is a PC-based sound measuring program were added. As a result of our experiment, the measured signal level is $2{\sim}3$[dB] lower than reference signal, latency is 16.69[ms] and the specific character of coherency is bad in high frequency band. Otherwise, this system transmits and receives signals over 90[%] in good condition as a result of measuring pink noise, frequency(1kHz), and phase, magnitude. In view of the result so far achieved, the system designed our team has excellent performance, it resolves defect of existing audio signal transmition system.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.28-37
• /
• 2018

It is necessary to produce and maintain interior lighting design reasonably and actively. Based on the lighting design applicable to interior design, the purpose of this study is to take into consideration the public design of public facilities installed in neighborhood parks and thereby to suggest a module-type variable interior lighting product design for reasonable use. To achieve that, relevant studies were reviewed to find the basic concepts of a module and the best cases of interior lighting applicable to interior design. To draw a new concept of the lighting design to which the concept of a module is applied, this study suggested the design direction for practical product development and a module-type design featuring easy process, product storage, assembly, and management, analyzed the reasonable maintenance direction for the development of lighting design, and proposed a case of design development applicable to the development of a new product design. Through cognitive strategy process, the design was made. This process, as a conceptual strategy, included the step of interior environment analysis, the step of lighting maintenance, the step of variable mechanism, and the step of emotional activation. These steps were connected with formative beauty of design so as to suggest a MLD(Module Lamp Design) strategy. In this way, this study tried to connect humans' free application for a space to a module product and to apply humans' visual approach and free conceptual value to MLD cognitive strategy design process for development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.481-491
• /
• 2016

This study analyzed the customer's revisit concepts and storytelling by restaurant customers to identify the elements that can attract the attention of customers. The restaurant concept or advertising, restaurant decor will also have to change to emphasize the comparative advantage of the features in the menu of a restaurant or other restaurants / service that tells a story. Membership cards or money, or the same convenience and use of the restaurant non-monetary 'transition cost' can compensate for the negative emotions and low satisfaction level of restaurant customers and help them choose to revisit the restaurant. Therefore, if such a transition takes full account of the effects of the cost to the customer, it can be used as an effective means. In class restaurants, such as the food and customer service, the increased levels of the restaurant atmosphere and empirical elements, such as store concept and physical environment, can improve the positive consumer sentiment, strengthen the customer satisfaction and have a positive effect on the customers' revisit intention. It is also important to improve the level of visual texture using light. In addition, positive consumer sentiment can be induced using the store concept, the physical environment, and experiential elements. In other words, membership cards, mileage points, and various financial and non-financial inducements as a marketing tool will have a positive impact on the customer's revisit intention.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.667-674
• /
• 2008

In this paper, operational problems of Busan Port and competitiveness deciding factors are analyzed by field data research and interview with employees in shipping companies and terminal operation companies. In the analysis, the problems Busan Port currently has are identified as follows: 1) low price competitiveness, 2) Lack of new port back facilities and connecting transportion system 3) Lack of operation ability of container terminal 4) Inefficient pour labor supply system. In order to strengthen the competitiveness and leap up to a hub port in North East Asia, Busan port is investigated to enhance below requirements. 1) Hiring more equipment and increase productivity in terminal 2) Integrating terminal operation companies to react maximization of vessel 3) Maintaining cost advantages 4)Proactively inviting global carriers to participate in the terminal operation 5)Making business environment for Global Terminal Operator to participate in the terminal operation in order to take advantage of their global marketing power.