• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.728-736
• /
• 2007

P2P 파일공유는 1999년 처음 등장한 이래 저작권 침해로 디지털 콘텐츠 시장을 파괴하는 '해적'으로 간주 되어왔다. 하지만 최근 들어 P2P 시장의 산업적 가능성을 새롭게 주목하는 움직임이 나타나고 있다. 아울러 학계에서는 P2P의 경제적 영향력을 공급자 편향의 시각이 아닌 소비자 측면을 포함한 균형적 관점으로 바라보기 시작했다. 본 연구 역시 균형적 관점에서 P2P를 바라보려는 접근법의 일환으로, P2P 영화파일 공유 이용자들의 영화소비패턴을 실증적으로 살펴보고자 하였다. 실제 P2P 영화파일 공유 이용자들에 대한 설문결과, 이용자들은 단일한 영화소비성향을 가지고 있지 않았으며 다운로드와 극장 관람빈도가 모두 높은 이른바 '얼리어답터'형과 다운로드를 극장관람의 대체재로 여기는 소위 '해적'형이 공존하고 있었다. 이 중 그간 산업계에서 우려하던 해적형의 비율은 10% 정도로 낮았고, 대부분의 P2P 이용자들은 오히려 일반 극장 관람객보다 더 적극적으로 극장소비를 하는 사람들로 영화산업에 긍정적인 기여를 하는 것으로 밝혀졌다. 이러한 소비자 분석결과는 향후 본격화되고 있는 P2P 다운로드 유료화 시장에 대한 전망을 밝게 하는 것으로, 현재 유료화에 있어 가장 중시해야 할 것은 불법 무료 다운로드에 대한 경계가 아니라, 소비자 편의적인 시스템의 개발임을 시사한다.

• Journal of Korea Game Society
• /
• v.3 no.1
• /
• pp.86-93
• /
• 2003

In this paper, we propose a new antialiasing method using filtering technique which is base on morphological pixel structure Aliasing occurs along the edge of lines and polygons. This undesirable effect happens because there are not enough pixels available on a typical monitor to properly display mathematically smooth lines and polygon edges. Aliasing can be very distracting. In a typical graphic scene, aliasing artifact will be visible along the edges of all objects that greatly diminish of realism. The proposed antialiasing method attempts to smooth extreme jagged contour lines and edges by properly handling pixel's structure, surface type and adjusting the pixel color according to the amount of pixel coverage. Next, we use filtering technique considering morphological pixel structure. Experimental results have shown that the propose algorithm achieves better performance in reducing noise for antialiasing. The method will be widely applied to basic antialiasing technique for computer graphic applications.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2076-2082
• /
• 2003

A cross-flow fan is widely used on many industrial fields: mining industry, automobile and home appliances, etc. The design point of the cross-flow fan is generally based on the region within low static pressure and high flow rate. It relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice. However, it has low static pressure efficiency between 30% and 40% because of relative high impact loss. Recently, in the air-conditioning systems, the operating behaviors at the off-design points are highly regarded to broaden the application area for various air-cooling loads. Especially, at the lower flow rate, there exists a rapid pressure head reduction, a noise increase and an irregular flow field against a rearguider as a scroll of centrifugal fan. Numerical analyses are carried out for investigating the flow characteristics in a cross-flow fan including the impeller, the rearguider and the stabilizer. Especially, various types of rearguiders are estimated by numerical and experimental methods to insure the stable operation in the region of lower flow rate. Numerical domains are discretized by hexahedral cells. Three-dimensional, unsteady governing equations are solved using FVM, PISO algorithm, sliding grid system and standard ${\kappa}-{\varepsilon}$ turbulence model. ASHRAE standard fan tester is also used to estimate the performance of the modeled crossflow fan.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.524-533
• /
• 2003

DBD(Dielectric Barrier Discharge) plasma in air is well established for the production of large quantities of ozone and is more recently being applied to aftertreatment processes for HAPs(Hazardous Air Pollutants). Aim of this work is to determine design and operating parameters of a hybrid air cleaning system. DBD and ESP(Electrostatic Precipitator) are used as nano particle charger and collector, respectively. Pelletized MnO$_2$ catalyst or activated carbon is used fer ozone decomposition or adsorption material. AC voltage of 7～10 KV(rms) and 60 Hz is used as DBD plasma source. DC - 8 KV is applied to the ESP for particle collection. The overall particle collection efficiency for the hybrid system is over 85 % under 0.64 m/s face velocity. Ozone decomposition efficiency with pelletized MnO$_2$ catalyst or activated carbon packed bed is over 90 % when the face velocity is under 0.4 m/s in dry air.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.63-69
• /
• 2014

This paper studies the strength, fatigue sensitivity, safety factor and lifetimes by means of structural and fatigue analyses of different models of rear doors upon the opening of doors and windows leading to severe fatigue fractures of the window motor components of rear doors. The simulation models were a standard model and other models. The other models, which are denoted here as models I and II, were modified versions of the standard model, with a rib of 3mm and a thickness of 2mm as compared to the standard model. The door was modelled with CATIA V5 and analyzed with the ANSYS program. The material of the rear door was cold rolled steel (DDQ). From the study results, the standard model and model I were confirmed to be less safe upon the opening of the door as compared to the opening of a window in terms of fatigue, but model II was found to be safe for both door and window openings.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.6 s.237
• /
• pp.904-912
• /
• 2005

The flow in a microchannel is usually characterized as a low Reynolds number (Re) so that good mixing is quite difficult to be achieved. In this regard, we developed a novel chaotic micromixer, named Barrier Embedded Kenics Micromixer (BEKM). In the BEKM, the higher level of chaotic mixing can be achieved by combining two general chaotic mixing mechanisms: (i) splitting/reorientation by helical elements inside the microchannel and (ii) stretching/folding via periodically located barriers on the channel wall. The fully three-dimensional geometry of BEKM was realized by a micro-stereolithography technology, in this study, along with a Kenics micromixer and a circular T-pipe. Mixing performances of three micromixers were experimentally characterized in terms of an average mixing color intensity of phenolphthalein. Experimental results show that BEKM has better mixing performance than other two micromixers. Chaotic mixing mechanism, proposed in this study, could be integrated as a mixing component with Micro-Total-Analysis-System, Lab-on-a-chip and so on.

• The Journal of the Korea Contents Association
• /
• v.2 no.4
• /
• pp.23-29
• /
• 2002

This paper suggest the image compression that is needed to process PACS in medical information system. The image decoding method is used Linear-predictor and Lloyd-Max quantizer(quantization) in the Wavelet transform domain. Wavelet Transform Method is processed the multi-resolution by dividing image into 10 sub-bands of 3 levels. Low frequency domain that is sensitive to human visual characteristic is encoded by DPCM which is lossless encoding methods, and Lloyed-Max quantizer, the optimal quantizer for reducing ringing and aliasing in the image of inter sub-band, is used in the remaining high frequency domain of sub-band. The examination verifies that decompressed images are superior by the result that PSNR is 28.53dB on the input image, 512$\times$152 abdominal CT image and Chest image.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.250-250
• /
• 2011

Pulsed DC magnetron sputter 진공 웹코팅 연속증착기를 사용하여 PET 또는 PEN 기판 위에 Al2O3 가스 배리어 박막을 형성 하였다. 주사전자현미경 측정으로 표면을 분석하였고, PERMATRAN-W3/33을 사용하여 투습률 값을 결정하였다. PEN과 PET 기판위의 가스 배리어 막 모두 O2 분압이 증가 할수록 투습률이 증가하였다. O2 분압이 증가함에 따라 결정립들 사이에 크랙이 발생하여 투습률값에 영향을 미치는 것을 확인하였다. PET 보다 PEN 기판위에 증착막이 더 O2분압이 증가할수록 크랙이 증가하였다. PET 위에 SiO2, SiOC 및 SiON 박막을 증착하여 SiO2는 두께에 따른 변화를 SiOC와 SiON는 부분압의 변화에 따른 투습률값과 투과도값을 측정하였다. SiO2 박막 두께가 500 nm일 때 최소의 투습률인 6.63 g/m2/day를 얻었고, SiO2 박막 두께가 $1{\mu}m$ 일 때 투습률값이 9.46 g/m2/day로 증가하였다. 투과도값은 두께가 증가할수록 감소하는 것을 보였다. 이러한 결과는 투습률값이 두께 변화에 따른 영향보다 표면의 결정립들의 영향에 더 민감함을 알 수 있었다. 부분압이 $6.6{\times}10^{-4}Torr$일 때 SiOC와 SiON의 최소의 투습률이 각각 7.85 g/m2/day 이고 8.1 g/m2/day 이며 SiOC 박막의 투습률 보다 작았다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.15-18
• /
• 2011

본 논문에서는 이동형 패럴랙스 배리어 방식의 모바일 3D 디스플레이에 응용하기 위해 개발된 시역계측알고리즘[1]을 실제시스템에 구현한 후 문제점을 분석하고, 그 문제점을 해결할 수 있는 새로운 방법을 제안한다. 본 연구팀에서 이동형 패럴랙스 배리어 방식의 모바일 3D 디스플레이에 응용하기 위해 개발한 이전의 시역계측기술[1]은 기존의 비올라-존스 얼굴 검출기[2]에 의한 얼굴검출 결과와 비올라-존스 얼굴 검출기의 단점을 보완하기 위해 새롭게 추가된 옵티컬-플로우 특징점 추적 알고리즘[3]에 의한 얼굴검출의 두 결과를 선형적으로 결합하여 시청자의 시역위치를 예측하였다. 하지만, 모바일 3D 디스플레이의 특성한 급격한 조명의 변화에서 옵티컬-플로우에 의한 특징점 추적알고리즘에 심각한 오류가 발생하는 문제점이 있다. 이러한 급격한 조명의 변화에 대한 문제점을 해결하기 위해 본 논문에서는 매 프레임마다 정확하게 옵티컬-플로우 얼굴 검출기의 정확도를 판단할 수 있는 방법을 제안하고, 다양한 실험을 통해 그 효과를 검증한다.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.4 s.25
• /
• pp.7-15
• /
• 2004

The design point of the cross-flow fan is generally based on the region within low static pressure and high flow rate. It relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice. However, it has low static pressure efficiency between $30\%$ and $40\%$ because of relative high impact loss. The purpose of this study is to research the reciprocal relation among each parameter. Experiments and numerical analyses are conducted on effects of a stabilizer and a rearguider on performance analysis of a cross-flow fan. Two-dimensional, unsteady governing equations are solved using FVM, PISO algorithm, sliding grid system and standard $k-{\epsilon}$ turbulence model. Experiments are also carried out to estimate the performance of the modeled cross-flow fan. It is clarified that the rearguider of Archimedes type has excellent results for the most part.