• Journal of the Korean GEO-environmental Society
• /
• v.20 no.12
• /
• pp.57-64
• /
• 2019

A man-made slope has been increased due to the construction of road. This slope lies at risk of rock falling, induced mostly by heavy rainfall. The MOLIT (Ministry of Land, Infrastructure and Transport) recommends the specific dimension of rockfall protection fence (post, wire-rope, and mesh) which should resist 48~61 kJ. However, the energy absorption capacity of each component of rockfall protection fence is not clearly presented. Hence, this study made an effort to compute the energy absorption capacity of each component in analytical and numerical method, and compared with each other.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.727-734
• /
• 2021

The purpose of this study was to analyze correlation between kinematic variables and ground slope perception ability during golf putting. 16 collegiate golfers were participated. To collect and analyze the kinematic data of putter head, SAMPutt lab was used(70 Hz). It was performed Pearson's correlation analysis using SPSS. The level of significance was at .05. As a results, right was correlated with backswing in flat. Toe-up was correlated with follow-through and left was correlated with aim, backswing, impact, follow-through, and loft in slice 1°. Toe-down was correlated with aim, backswing, impact in slice 2°. Toe-up was correlated with follow-through in hook 2°. In conclusion, it is important to improve the putting stroke through repetitive ground slope perception training.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.4
• /
• pp.311-319
• /
• 2020

Objective: The purpose of this study was to examine of this study is to study the effect of squat exercise on muscle activation in a sling device using various types of ropes and to propose an effective sling exercise method for strengthening the lower extremity strength. Method: 20 adult male subjects (age: 25.2±2.4 yrs, height: 176.5±3.2 cm, weight: 77.2±4.5 kg) participated in this study. In the experiment, a total of four squats were conducted: squat [SE], sling squat using inelastic rope [IR], sling squat using elastic rope [ER], and sling squat using two elastic ropes [TER]. Squats were performed 5 times for each condition, and a 60-second break was given for each condition to minimize muscle fatigue. The activation of biceps brachii, rectus femoris, gastrocnemius, and tibialis anterior muscles was measured. Results: It was found that the activation of all muscles was the lowest during the squat exercise [SE]. During the sling squat using inelastic rope [IR], the muscle activation of the biceps brachii was the highest. During the sling squat using elastic rope [ER], the activation of the rectus femoris, gastrocnemius, and tibialis anterior muscles was found to be the highest. In the sling squat using two elastic ropes [TER], most of the muscle activation was similar to that of the sling squat using inelastic rope [IR]. Conclusion: Our results of the experiment, it was found that sling squat exercise using elastic rope had a positive effect on the activation of all muscles. It is thought that performing a squat exercise under moderate weight load and unstable conditions, such as sling squat exercise using elastic rope, can increase the muscle activity of the lower limbs and perform more effective exercise effect than performing a conventional squat exercise under stable conditions. In the future, if research is conducted not only on adult men, but also on various ages and patients, it will be able to provide positive help in improving balance, stability and stamina through squat exercise.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.2
• /
• pp.5-12
• /
• 2022

In this study, a field test was conducted to present a test method for performance evaluation of a rock fall prevention fence, centering on the vertical drop test among the existing test methods of the rock fall prevention fence. A test to determine the support capacity of a rockfall prevention fence in Korea is usually conducted using a combination of wire mesh, poles, and wire rope, and the location of the impact of falling rocks has been conducted centered on the center of the wire mesh. However, in the case of domestic papers and test data, there is no data on direct hit of post. Therefore, the amount of displacement and weak section were analyzed when the impact on 100kJ class rock energy was hit on the post, centering on the Rockfall Protection fence (highway type No. 2).

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.3
• /
• pp.5-13
• /
• 2022

In this study a test was conducted to identify weak section using 100kJ class rock energy to find out the protection performance of rockfall prevention fences in Korea. Performance rating of the rockfall protection fences is very low (48~61kJ) compared to that of foreign countries and it is necessary to determine whether it can function properly if high rock energy is generated. Furthermore, a reinforcing technology that can improve to 100kJ energy on the existing rockfall protection fences should be developed. Therefore, this study confirmed the protection performance using 100kJ rock energy in the existing rockfall protection fence system (for national road, for highway) and identified weak section of post, wire ropes and nets. Furthermore, it will be used as basic data for developing 100kJ class reinforcement technology without dismantling the existing rockfall protection fence (48-61kJ).

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.10-19
• /
• 2023

Fall accidents account for the highest accident fatality rate in the construction industry. In addition, wearing and using a safety belt is the most realistic and important preventive measure to reduce fall accidents. Safety belts are protective devices worn by individual workers; they prevent workers from falling and allow for time to rescue the workers. However, the legal standards for safety belts only stipulate the materials, specifications, and strength of parts; there is no provision for an auxiliary rope fixing method to fix the safety belts safely. Due to this reason, workers in industrial sites arbitrarily fix and use the auxiliary rope. Currently, the most used method to fix the auxiliary rope is to tie a knot, which significantly lowers the strength of the material compared to the standard strength. Moreover, many construction sites are located outdoors, so the strength of the materials used in the auxiliary rope is inevitably reduced due to various external environmental conditions. Therefore, to solve this problem, this study was conducted to evaluate the strength of the material of the auxiliary rope for fixing the safety belt and the knot-tying method for the auxiliary rope. In this study, the exposure conditions for the effects of temperature and moisture were set to reflect the characteristics of the construction industry. The results of this study are expected to be used for standards establishment and the safe use of the auxiliary rope for safety belts in actual field applications.

• Clinical Pain
• /
• v.18 no.2
• /
• pp.92-96
• /
• 2019

Torticollis is an abnormal, asymmetric head or neck position which usually caused by imbalance of paracervical muscles. The traumatic torticollis can be caused by following events; atlantoaxial rotatory subluxation, atlantoaxial dislocation, cervical vertebral fractures, and injury to the cervical musculature. Especially, acute traumatic atlantoaxial rotatory subluxation usually presents limitation of cervical range of motion without pain or neurologic deficit. We report a case of a 58 year-old man who developed the acute atlantoaxial rotatory subluxation right after the chiropractic therapy, which induced the limitation of cervical range of motion to 52.5% of normal range. The magnetic resonance image revealed the facture of the odontoid process and the partial injury in transverse ligaments of the atlas. He underwent intramuscular botulinum toxin injection and 10 days of continuous cervical traction 15 hours a day using a 5 kg weight. The range of the cervical motion restored up to 90.2% of normal range.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.159-165
• /
• 2023

This study was limited to the underwater search part among water accidents on the inland water surface, and analyzed five underwater search methods and lifesaving time at 5m underwater. The subjects of the experiment were 10 people. The semi-circle search took the longest with 259 seconds, and the modified round-trip search took 78.60 seconds, showing a significant difference with an average of 180.04 seconds. Subjects B and D showed similar values, with average underwater search times of 199 seconds and 202 seconds, respectively. Subject C showed a significantly higher average underwater search time of 209 seconds. The reason seems to be from increased anxiety and excessive tension due to poor underwater watch. Subject A showed a significantly lower underwater search time of 187 seconds. The reason seems to be the result of E's experience being the most among the test subjects and his rich diving experience in the Han River with poor visibility. As for convenience, semicircle search showed a low score of 6~7, and modified reciprocal search showed a high score of 8~9. The most suitable rescue method as an underwater search method in the Han River where visibility is poor is determined to be a modified round-trip search method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.465-471
• /
• 2023

This paper proposes a comparator structure that improves the noise and output delay of a single-slope ADC(SS-ADC) used in CMOS Image Sensor (CIS). To improve the noise and delay characteristics of the output, a comparator structure using the miller effect is designed by inserting a capacitor between the output node of the first stage and the output node of the second stage of the comparator. The proposed comparator structure improves the noise, delay of the output, and layout area by using a small capacitor. The CDS counter used in the single slop ADC is designed using a T-filp flop and bitwise inversion circuit, which improves power consumption and speed. The single-slope ADC also performs dual CDS, which combines analog correlated double sampling (CDS) and digital CDS. By performing dual CDS, image quality is improved by reducing fixed pattern noise (FPN), reset noise, and ADC error. The single-slope ADC with the proposed comparator structure is designed in a 0.18-㎛ CMOS process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.164-172
• /
• 2009

Anchors and saddles are used to have sufficient geometrical rigidity and make target configuration of main cable of suspension bridge. Neglecting the sliding effect at saddles, points at them have been idealized as fixed nodes in lots of former studies. In general, sliding effects are reported to show significant structural behaviors of main cable and cause to the different responses of bridges. During early erection steps of the suspension bridge, especially, the sliding effect occurs easily because there is large difference of cable tension between main and side span in removing set-back ropes or not applying set-back. This study presents the finite element analysis considering to cable sliding effect and shows the comparison of differences between sliding and non-sliding at election sequence. The analysis of sliding between main cables and saddles needs to obtain more realistic responses because the analysis result can represent unfavorably different responses of bridges. Moreover, the sliding analysis method and results in this study can be used to basic criteria in engineering design and construction steps.