• Defense and Technology
• /
• no.8 s.174
• /
• pp.30-35
• /
• 1993

과학 1호로 로켓의 추진기관 개발을 통하여 항공우주연구소는 고체 추진제 로켓 모타 설계에 필요한 소프트웨어의 개발 및 그 활용, 그리고 경제적인 로켓 모타의 개발방법 등등 많은 것을 배웠습니다 또한 이는 앞으로 우주개발을 위한 새로운 로켓 추진기관 개발에 좋은 경험이 되었습니다 더욱 뜻깊은 것은 이번 과학 1호 로켓의 발사는 명실공히 산.학.연의 종합적인 연구체계로 이루어졌다는 것입니다

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.05a
• /
• pp.51-55
• /
• 1996

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.6
• /
• pp.82-87
• /
• 2014

Dual pulse rocket motor has a rocket motor with different pulse grains divided by a pulse separation device such as a fragile bulkhead or a thermal barrier type. It distributes thrust energy very effectively via pulse separation device to improve range and terminal velocity of a missile. This paper contains the thermal barrier design and experimental analysis through ground firing tests of small dual pulse motors. The results will be applied to the design, test and evaluation of the scale up dual pulse rocket motor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.38-43
• /
• 2001

In this study, the technique of the performance prediction on the finocyl-type dual-thrust rocket motor is developed, and the predicted data are compared with those of the static firing tests. The prediction is carried out with the separate calculations of the grain burning area and the performance of the rocket motor. When predicting the performance of the dual-thrust rocket motor, the different correction factors should be used at the boosting and sustaining phases. Otherwise, an error of prediction will follow. Reprediction using the separate correction factors shows good agreement with the test data within 0.5% error.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.32-32
• /
• 2000

3단형 과학로켓의 고체모타의 내부 유동을 추진제의 연소에 따라 내부형상이 변화하는 과정에 대해 수치해석 하였다. 추진제는 표면에서 균일하게 연소된다고 가정하였으며 연소거리가 0.1mm, 30mm, 60mm, 90mm인 경우의 고체모타 내부 물리량 변화를 관찰하였다. 연소가 진행되며 잠입형 노즐의 위 부분에 큰 재순환 영역이 생기는 것이 관찰되었으며 노즐에 작용하는 압력 힘을 구하여 본 결과 노즐부의 모멘트 힘은 크지 않은 것으로 판명되었다.(중략)

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.144-149
• /
• 2007

Behaviour of a thread joint of a rocket motor case show complex structural characteristics. Pre-torque must be applied to the threads to prevent the loosening of the interface from the additional pressure load. During the pressurization of the rocket motor case, the jointing face may be opened if the pre-torque were not set properly or the structure may be failed if the local concentrated stress exceeds the strength of the material. In this paper, the structural behaviour of a thread joint of a rocket motor case were analyzed by the finite element method and the results were compared to the experimental ones. A method to set a pre-torque for a thread joint were proposed to ensure the structural safety.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.78-79
• /
• 2002

유도미사일용 추진기관으로 흔히 쓰이는 고체 로켓 모타의 경우 단순 추력형보다 복합 추력형 로켓을 사용하는 것이 효과적인 경우가 많다. 특히 발사초기에 높은 추력이 필요하고 그 후는 지속적이며 상대적으로 낮은 추력만을 요하는 무기체계의 경우 일반적으로 부스터(booster)와 서스테이너(sustainer) 로켓을 별도로 제작/작동시켜 임무를 수행하나 이를 하나의 추진기관으로 통합하여 두 단계의 추력을 동시에 실현하는 이중 추력형 로켓 모타를 이용하게 되면 많은 이점이 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.4
• /
• pp.40-49
• /
• 2001

The basic research on AKM(Apogee Kick Motor) for space launch vehicle was carried out. AKM which will be used as 3rd stage solid rocket motor in 3-stage Korean Sounding Rocket(III) has been developing. KM is a solid rocket motor using composite propellant based on HTPB and is composed of composite motor case and submerged nozzle. To develop KM rocket motor satisfing a given set of requirement, firstly the full-scale KM with diameter 520mm was designed, then sub-scale motors reduced about 60% were manufactured and tested. Full-scale ground firing test is accomplished two times.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.69-72
• /
• 2011

The ground tests of the dual pulse solid rocket motors(SRM) were performed to prove the performance of the developed dual pulse solid rocket motors. To achieve dual pulse, pulse seperation device(PSD) and independent ignition systems were installed between the 1st pulse motor and the 2nd pulse motor. The three major development goals are as follow. First, the total impulse of the dual pulse SRM must be over 90% of the single SRM which has same envelopment and weight. Second, the ignition of the 2nd pulse motor can be started at any time between 0 and 60 seconds after termination of the 1st pulse motor. Last, the rupture disk of PSD must not be broken at the 1st pulse pressure, but be broken at below 30% of the 2nd pulse operating pressure. The results of the ground tests satisfied the development goals.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.245-248
• /
• 2011

A multi pulse rocket motor(MPRM) has several advantages compared to the single one. The range and the terminal velocity of the guided missile can be remarkably increased by the application of the pulse separation device(PSD) to the solid rocket motor which resulted in appropriate thrust distribution. In this study, the full scale heavy type dual pulse rocket motor with the bulkhead type PSD was designed, manufactured, and fire-tested. The bursting time and pressure of PSD were analyzed by the pressure, thrust and vibration results of static fire tests. As a result, the design requirement was verified that bursting pressure is lower than 30% of 2nd pulse operating pressure.