• Microbiology and Biotechnology Letters
• /
• v.33 no.1
• /
• pp.41-50
• /
• 2005

An organic acid tolerance mutant (M-200) was obtained from Leuconostoc mesenteroides KCCM 35471, followed by the screening procedure using a specific organic acid medium (lactic acid: acetic acid, 2:1). The characteristics of the acid tolerance M-200 and the wild type LM-W were examined at various temperature and pH ranges $(l0-30^{\circ}C$ of temp, 3.5-4.5 of pH). The growth of strain M-200 at HCl adjusted medium $(10^{\circ}C\;and\;pH 3.5)$ was observed. In the case of organic acid adjusted medium, the strain showed its growth at the pH range of 3.8. When the strain M-200 was used as a starter for Kimchi fermentation, a constant acid level (0.55) was observed during the whole fermentation period. This result indicates that the strain produces a proper level of acid content for the Kimchi fermentation. This result also indicates that the edible period of Kimchi can be extended to 3.5 fold compare to the result obtained from the LM-W used Kimchi fermentation. However the excess use of the strain M-200 showed the inhibition of growth of Lactobacillus plantarum, low lactic acid level content and low level of organoleptic test. In the case of organic acid content during the Kimchi fermentation, the strain M-200 showed relatively low production rate compare to the wild type (M-200: 3.5 mg/L at 21 days of fermentation, LM-W: 7 mg/L at 21 days of fermentation). Therefore a mixed Kimchi starter containing M-200 and other strains probably maintain a good Kimchi quality during the fermentation.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.2
• /
• pp.144-152
• /
• 1993

A bacterium which degrades efficiently synthetic detergents was isolated from the polluted waters, activated sludge of wastewater treatment plants or polluted soil. This bacterium showed considerably higher growth rate in the agar plate containing $2,000{\mu}g/ml$ of synthetic detergents than any other isolated strains, was identified as a Pseudomonas fluorescens or strains similar to it. The strain was named as a Pseudomonas fluorescens S1. Optimum pH and temperature for the growth of the Pseudomonas fluorescens S1 were pH 7.0 and $30^{\circ}C$, respectively. The strain was resistant to streptomycin and gentamycin, but sensitive to kanamycin. The strain was greatly resistant to zinc chloride, lead nitrate and copper sulfate, but unable to grow in the presence of relatively low concentrations of mercury chloride and silver nitrate. This strain utilized benzene, catechol, cyclohexane and xylene as a sole carbon source. The strain was well grown in the medium containing ABS 10,000${\mu}g$/ml. Degradation of ABS was 55% and 60% at 20${\mu}g$/ml and 100${\mu}g$/ml of ABS, respectively. Benzene ring was degraded 45% in 100${\mu}g$/ml of ABS. During the incubation of the strain in the medium containing ABS 100${\mu}g$/ml and COD 10,000${\mu}g$/ml for 4 days, degradation of ABS and COD were reduced to 40${\mu}g$/ml and 3,200${\mu}g$/ml, respectively. Total amino acid content of the Pseudomonas fluorescens S1 grown with 1,000${\mu}g$/ml of ABS was 115mg/g cell, whereas its content was decreased in the bacterium grown without synthetic detergent by 9.4%.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.93-102
• /
• 2015

The characteristics of frozen soils are one of most important factors for foundation design in cold region. The objective of this study is to evaluate the shear strength and stiffness of frozen soils according to the confining conditions during the freezing and shearing phase. A direct shear box is constructed for the frozen specimens and bender elements are mounted on the wall of the shear box to measure shear wave velocities. Specimens are prepared by mixing sand and silt with a silt fraction of 30% in weight and the degree of saturation of 10%, giving a relative density of 60% for all tests. The temperature of the specimens in the freezer is allowed to fall below -5℃, and then direct shear tests are performed. A series of vertical stresses are applied during the freezing and shearing phase. Shear stress, vertical displacement, and shear wave along the horizontal displacement are measured. Experimental results show that in all the tests, shear strength increases with increasing vertical stress applied during the freezing and shearing phases. The magnitude of the increase in shear strength with increasing vertical stress during shearing under fixed vertical stress in the frozen state is smaller than the magnitude of the increase in vertical stress during freezing and shearing. In addition, the change in shear wave velocities varies with the position of the bender elements. In the case of shear waves passing through the shear plane, the shear wave velocities decrease with increasing horizontal displacement. This study provides an evaluation of the properties of shear strength and stiffness of frozen soils under varied confining condition.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.93-101
• /
• 2007

In order for bioremediate the benthic layer in polluted inner Bay, the effects of irradiance and wave-length irradiated from light emission diode (LED) on the growth of benthic diatom Nitzschia sp. (Hakozaki Bay strain of Japan) were investigated. The Nitzschia sp. was cultured under blue LED (450 nm), yellow LED (590 nm), red LED (650 nm) and fluorescent lamp (mixed wavelengths). At $25^{\circ}C$ and 30 psu, the growth of Nitzschia sp. showed its peak at $20\;{\mu}mol\;m^{-2}\;s^{-1}$ (blue LED) and $40\;{\mu}mol\;m^{-2}\;s^{-1}$ (fluorescent lamp), and was inhibited at the irradiance higher than that irradiance. Nitzschia sp. in yellow LED and red LED is fitted by a rectangular hyperbolic curve because no photoinhibition was observed under maximum irradiance used in this study. The irradiance-growth curves were described as ${\mu}=-0.46{\exp}(1-I/6.32)+0.46-0.00043I,\;(r^2=0.98)$ under blue LED, ${\mu}=0.42(I+7.87)/(I+58.9),\;(r^2=0.99)$ under yellow LED, ${\mu}=0.39(I+3.39)/(I+21.6),\;(r^2=0.94)$ under red LED, ${\mu}=-0.38{\exp}(1-I/7.23)+0.38-0.00016I,\;(r^2=0.96)$ under fluorescent lamp. Maximum specific growth rate of blue LED, yellow LED, red LED and fluorescent lamp was $0.44\;day^{-1},\;0.42\;day^{-1},\;0.39\;day^{-1}$ and $0.37\;day^{-1}$, respectively. The absorption coefficient ($a_{ph}$) of Nitzschia sp. was similar under all the wavelengths (400 nm-700 nm), although maximum $a_{ph}$ was $0.0224\;m^2\;mg\;chi.\;{\alpha}^{-1}$ in 472 nm and $0.0179\;m^2\;mg\;chi.\;{\alpha}^{-1}$) in 663 nm. The results may indicate the possibility of environmental improvement around the benthic layer in polluted coastal area because microphytobenthos growth is stimulated by means of irradiated blue LED at the benthic boundary layer during both autumn and winter, and yellow LED, which might have been suppressed growth of harmful algae, at the layer during both spring and summer.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.4
• /
• pp.468-475
• /
• 2005

To determine the effect of different fermentation level on the quality of Nabak Kimchi during storage, this study was carried by analysing the result of physico-chemical properties, microbiological characteristics and sensory evaluation of Nabak Kimchi stored up to 24 days. For the physico-chemical properties, pH, total acidity, reducing sugar, carbon dioxide contents, color values were investigated while for the microbiological characteristics, total microbial counts and lactic acid bacteria were studied. Nabak Kimchi products were fermented at six different level of temperature and time and stored in Kimchi refrigerator at $4^{\circ}C$ for 24 days. As the storage period increased, the pH values of LF15, SF25 and LF25 decreased rapidly after initial fermentation and the pH values of SF4, LF4 and SF15 increased slightly in the beginning and then decreased. total acidity increased as storage period proceeded. the amount of reducing sugar was 4.92mg/ml before fermentation and increased significantly and reached its maximum values then decreased. lightness and redness of Nabak Kimchi decreased as storage period became longer, but yellow of Nabak Kimchi increased during storage. Total microbial counts of SF25 and LF25 reached to the highest at the 6th day and total microbial counts of LF15 reached to the highest at the 12th day and then significantly decreased. However, total microbial counts of SF4, LF4 and SF15 continuously increased up to the 24th day. The number of lactic acid bacteria was similar to the phase of the change of total microbial counts.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.32-37
• /
• 2004

Effects of mushroom powder on physicochemical characteristics of dough and bread-making properties were studied. In mixogram test, addition of 2-10% mushroom powder increased water absorption from 67,0 to 79%. Peak time, peak height, band width, and seven minute height of mushroom-wheat flour composite were similar to those of control. Sedimentation and P.K. values decreased with increasing amount of mushroom powder In amylogram test, no significant difference was observed in gelatinization temperature between control and mushroom powder-added dough. Peak viscosity increased with increasing amount of mushroom powder, Highest loaf volume was attained when 2 and 4% mushroom powders were added, whereas decreased above 6%. Bread weight and L value of crust increased with increasing amount of mushroom powder whereas 'a' value decreased. As the amount of mushroom powder increased, L value of crumb color decreased. No significant difference in springiness and adhesiveness was observed between control and mushroom-wheat composite flour bread whereas chewiness and gumminess, increased with increasing amount of mushroom powder, Hardness generally increased as the amount of mushroom powder increased. Mushroom powder caused bread staling at both storage temperatures ($4^{\circ}C\;and\;25^{\circ}C$). Although sensory value decreased with increasing mushroom powder, use of mushroom powder to replace up to 4% wheat flour is recommended in making bread.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.611-617
• /
• 2011

This study investigated the germination and reduction of microbial population in domestic (radish, Chinese cabbage, and vitamin) and imported (radish and red cabbage) sprout seeds by heat treatment (40, 50, 60, and 70$^{\circ}C$ for 15 min or 30 min). The germination ratio (define the ratio) was 45-97% at 24 h after treatment <60$^{\circ}C$ and was decreased at 70$^{\circ}C$. In domestic radish seed, total aerobic bacteria were decrease by approximately 1.71 log CFU/g after heat treatment at 70$^{\circ}C$ for 30 min and viable coliforms were decreased to under the detection limit at temperatures over 60$^{\circ}C$. Decrease of total aerobic bacteria and coliforms in domestic Chinese cabbage seed was 1.23-1.34 and 2.77 log CFU/g, respectively, after heat treatment over 60$^{\circ}C$. In domestic vitamin seed, total aerobic bacteria were decreased by about 0.3 log CFU/g at 70$^{\circ}C$ for 15 min. In imported radish seed, total aerobic bacteria were decreased 2.12-2.30 log CFU/g after heat treatment over 60$^{\circ}C$. Total aerobic bacteria in imported red cabbage seed were reduced by 0.66-0.84 log CFU/g after heat treatment over 40$^{\circ}C$ and coliforms were undetectable. In case of Bacillus cereus, there was no significant difference by heat treatment in any sample. Staphylococcus aureus and Salmonella sp. were not detected at the detection limit in any tested seeds at any temperature.

• Microbiology and Biotechnology Letters
• /
• v.34 no.1
• /
• pp.7-14
• /
• 2006

Feather, generated in large quantities as a byproduct of commercial poultry processing, is almost pure keratin, which is not easily degradable by common professes. Four strains, SMMJ-2, FL-3, NO-4 and RM-12 were isolated from soil for production of extracellular keratinolytic protease. They were identified as Bacillus sp. based on their morphological and physiological characteristics. They shown high protease activity on 5.0% skim milk agar medium and produced a substrate like mucoid on keratin agar medium. Bacillus sp. SMMJ-2 had a faster production time for producing keratinolytic protease than other strains. This strain did not completely degrade whole chicken feather for five days in basal medium but completely degraded whole chicken feather when supplied with nitrogen source for 40hours in keratinolytic producing medium ($0.7%\;K_{2}HPO_{4},\;0.2%\;KH_{2}PO_{4},\;0.1%$ fructose, 1.2% whole chicken feather, $0.01%\;Na_{2}CO_3$, pH 7.0). When supplied with chicken feather as nitrogen source, keratinolytic protease activity was 89 units/ml/min. When soybean meal was used as nitrogen source, the keratinolytic protease production reached a maximum of 106 units/ml/min after 48 hours under $30^{\circ}C$, 180 agitation. To isolate the keratinolytic protease, the culture filtrate was precipitated with $(NH_4)_{2}SO_4$ and acetone. The recovery rate of keratinolytic protease was about 96% after treatment with 50% acetone. The enzyme was stable in the range of $30{\sim}50^{\circ}C$ and pH $6.0{\sim}12.0$.

• Microbiology and Biotechnology Letters
• /
• v.40 no.2
• /
• pp.128-134
• /
• 2012

Foot and mouth disease (FMD) is one of the most notorious and contagious viral diseases afflicting cloven-hoofed animals. In this study, the physicochemical properties of leachate from a FMD landfill site at 773-1, Waryong, Andong, Korea and the ground water from 777, Waryong, Andong, Korea, were analyzed for 1 year from December $10^{th}$ 2010 to November $17^{th}$ 2011. The leachate was collected from the FMD landfill site during March, May, July, September and November, 2011 and changes in pH, brix, water content, insoluble solids, crude proteins, crude lipids, total and reducing sugars and ash content were determined. Considering the annual profiles of temperature and rainfall at the FMD landfill site, the dramatic changes in the physicochemical properties of the leachate from March to July, and especially from May to July, such as increases in pH, and a rapid reduction of brix and organic matter, may be closely linked to the growth of microorganisms in the leachate. The sharp decreases in the concentration of biominerals, such as Mg, Ca, and Fe from 1073, 4311 and 56.2 ppm in March to 151, 78, and 0.1 ppm in November, further suggest that decreases in organic matter in the leachate result from degradation by microorganisms originating from the intestines of the livestock. Analysis of the profiles of the organic materials in the leachate revealed that the properties of the leachate were similar to those of excremental matter-derived water. These results could be applied to a number of fields for the analysis of organic matter behavior, the development of the degradation process, and risk analysis in the environment for hygiene and food industries, of leachate from FMD landfill sites.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1116-1122
• /
• 2008

The existing technology which is for recycling aggregate using dried swage sludge have been limited for practical application, because the properties of aggregate are not regular and don't meet the recycling aggregate standard. In this research, an innovative slag-producing technology is developed by addition of oyster shell, waste cast-sand and iron-rust as inorganic waste additives. The mixed slag with the additives was evaluated at the various ratio of CaO/SiO$_2$, SiO$_2$/Al$_2$O$_3$ and Fe$_2$O$_3$/SiO$_2$. When the waste sludge was melted at 1,400$^{\circ}C$ during 20 minutes, the optimal ratio of CaO/SiO$_2$ for the slag added the oyster shell, SiO$_2$/Al$_2$O$_3$ for added the waste cast-sand and Fe$_2$O$_3$/SiO$_2$ for added the iron-rust were 1.00, 3.00 and 0.60, respectively. At the optimal condition, the bulk density of the slag was 2.24 g/cm$^3$, 2.45 g/cm$^3$ and 2.73 g/cm$^3$, And the 24 h water adsorption was 4.72%, 1.44% and 0.37%, respectively. Therefore it is proved that adding the waste additives to the process of the slag production contributed for elevation of recycling aggregate properties. And also it is expected that production cost can be reduced by decreased melting temperature.