• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.615-621
• /
• 2013

The robot calibration has greatly improved the absolute accuracy of the industrial robot. However, the accuracy of the relative positions of robotic tool-tip at work-points on a work-piece is only slightly corrected by the robot calibration since there has been no practical method to eliminate the elements of the setup position errors at a robotic workplace. A robotic workplace calibration is demonstrated in this paper to minimize the relative position errors between a robot tool-tip and the work-point on a work-piece. The existing teaching and playback method has been developed for the robotic workplace calibration. This paper uses the work-piece fixed in a robotic work-place as measurement equipment instead of a special robot measurement equipment for the robotic workplace calibration. The positive effect of the robotic workplace calibration is supported by the results of computer simulation on an ideal robotic workplace model and an experiment at the actual robotic workplace.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.80-88
• /
• 2003

We propose a new technique to design an unmaned integrating control system based-on Windows XP version off-Line Programming System which can simulate a dynamic model of robot manipulator in three dimensions graphics space in this paper. The robot with 4 and 6 axes modeled SM5 and AM1 respectively were adopted as an objective model. Forward kinematics, inverse kinematics and robot dynamics modeling were included in the developed off-line program. The interface between users and the off$.$line programming system in the Windows XP's graphic user interface environment was also studied. The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by silicon Graphics, Inc. were utilized for three dimensions graphics.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.96-104
• /
• 2013

Study of human-robot Interaction gets more and more attention to expand the robot application for tasks difficult by robot alone. Developed countries are preparing for a new market by introducing the concept of 'Co-Robot' model of human-robot Interaction. Our research of direct teaching is a way to instruct robot's trajectory by human's handling of its end device. This method is more intuitive than other existing methods. The benefit of this approach includes easy and fast teaching even by non-professional workers. And it can enhance utilization of robots in small and medium-sized enterprises for small quantity batch production. In this study, we developed the algorithms for creating accurate trajectory from repeated inaccurate direct teaching and GUI for the direct teaching. We also propose the basic framework for direct teaching.

• Proceedings of the KWS Conference
• /
• 1998.10a
• /
• pp.164-167
• /
• 1998

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.407-409
• /
• 1996

The Direct Arm(DDA) is a SCARA typed direct drive manipulator with three degree of freedom(DOF) using the direct motor of the NSK company. In the paper, we propose a convenient interface for the SCARA-type robot which is practical to use. The proposed Visual Robot Teaching Mode using 3D graphics replaces the current teaching box. And besides this graphical teaching software can be implemented on the PC which is company used as a robot controller. This program was developed for the Windows 95 OS.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.497-501
• /
• 1990

본 논문에서는 다중로보트의 제어를 위하여 비젼 센서 등 여러 가지 센서신호를 처리할 수 있고 로봇의 충돌회피 및 협조제어를 할 수 있는 제어시스템을 개발하였다. 본 제어장치는 시스템 전체를 관리하며 언어 및 로보트 동작의 교시 그리고 자기진단 등의 기능을 하는 Supervisory Processor, vision에 대한 정보를 담당하는 로보트 제어 processor 등 여러개의 프로세서로 나누어 분산처리 구조를 갖도록 하여 확장성 및 유연성이 높은 시스템이 되도록 하였다. 실험적으로 본 시스템을 이용하여 로보트로 하여금 puzzle을 맞추는 작업을 수행시킴으로써 본 시스템의 우수성을 입증하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.206-212
• /
• 2015

This paper proposes the physical human-robot interaction method that controls the robot arms using ITO touch panel sensor as the skin of robot. To implement physical human-robot interaction, the method of using the force/torque sensor and the method of using tactile sensor created by arranging small element type of sensor have been studied. However, these sensors have the pros and cons in terms of price and performance. This study aims to demonstrate the economy of element type sensor and the accuracy of force/torque sensor through experiment by proposing the method of physical interaction using the touch panel as the skin of robot, and by constructing overall system. The experiment was carried out for the method of controlling the robot arm by installing end-effecter and the method of controlling robot arm by creating the gesture with reference point on the touch panel. Through this experiment, the possibility of teaching control using the touch panel was confirmed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1071-1076
• /
• 2011

NC machines are generally used for machining operations because of their position accuracy, path accuracy, and machining reaction force. However, some NC machines require a very large space and are expensive. Recently, industrial articulated robot arms with large handling capability and wrist torque have been developed and the corresponding sensor technology has been improved. A machining robot for three-dimensional large curved objects was developed on the basis of an automatic-path-generation method. A self-position-compensation method with a laser displacement sensor was adopted for the six-axis robot developed, because the large articulated robot arms had poor position accuracy. An automatic-path-generation method using specific points was adopted to reduce the number of teaching points and time. In order to determine the proper machining conditions, various machining conditions such as tool rotation speed, cutting angle, cutting depth, and tool moving speed, were evaluated.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.69-77
• /
• 1997

본 논문은 금형의 마무리 연마 작업을 로봇을 이용하여 자동화하기 위한 오프라인 프로그래밍 시스템개발을 그 내용으로 하고있다. 3차원 자유곡면 형상을 갖는 금형을 연마하기 위한 로봇 작업 경로를 효율적으로 생성하기 위해서는 기존의 교시 방법이 아닌 CAD시스템과 연계된 시뮬레이션 방식의 자동 경로 생성 방법이 요구된다. 본 연구에서 개발된 금형 연마 작업을 위한 오프라인 프로그래밍 시스템은 연마 작업 시뮬레이션을 위한 기하학적 모델링 기능, 로봇의 작업 공간을 고려한 작업장 배치 기능, 연마 로봇의 효율적인 기구학 해, 3차원 그래픽 시뮬레이션, 3차원 물체간의 충돌 검사 기능 및 유기적인 관계형 데이타 베이스 기능 등으로 구성된다. 본 시스템의 시뮬레이션 결과를 로봇의 위치 보정 과정을 거쳐 로봇 작업 프로그램 으로 변환함으로써 최종적으로 실제 연마 작업이 가능한, 정확하고 안전한 로봇 프로그램을 생성하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.65-66
• /
• 2010