• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.6
• /
• pp.1179-1185
• /
• 2010

This paper deals with a robust controller design problem for a small one-link robot arm system subject to input time delay and load variations. The uncertain parameters of the system are considered as a disturbance input. A disturbance observer(DOB) has been designed to alleviate disturbance effects and to compensate performance degradation owing to the time-delay. This paper employs a new DOB structure for non-minimum phase systems together with the Smith predictor. We propose a new controller for reducing the both effects of disturbance and time-delay. In order to test the performance of proposed controller, four different other control laws are compared with the proposed one by computer simulations. The simulation results show the effectiveness of the proposed control method.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1929-1930
• /
• 2006

Human like robot arm posture for grasping by considering the shape of the target object is quite a challenge in the field of robotics. In this paper, an optimized grasp posture with respect to the shape of the object considering the wrist joint angle and elbow elevation angle, in order to verify that the grasp posture is human like has been proposed. Given a target object, the candidates for grasp are computed by the method described in this paper. For each candidate, the closed loop inverse kinematics has been solved for the corresponding hand position and orientation. From the obtained joint angles through inverse kinematics, the elbow elevation angle has been computed and compared with the elbow elevation angle obtained through human movement data by the characteristic equation. After considering all the candidates, the hand position and orientation with minimum wrist joint and difference in elbow elevation angles has been utilized as the optimized grasp posture. Simulation results are presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.345-348
• /
• 1997

In this paper, a motion control algorithm is developed using a fuzzy control and the optimization of performance function, which makes a robot arm avoid an unexpected obstacle when the end-effector of the robot arm is moving to the goal position. During the motion, if there exists no obstacle, the end-effecter of the robot arm moves along the pre-defined path. But if there exists an obstacle and close to the robot arm, the fuzzy motion controller is activated to adjust the path of the end-effector of the robot arm. Then, the robot arm takes the optimal posture for collision avoidance with the obstacle. To show the feasibility of the developed algorithm, numerical simulations are carried out with changing both the positions and sizes of obstacles. It was concluded that the proposed algorithm gives a good performance for obstacle avoidance.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.187-196
• /
• 1996

A new control strategy to actively control the vibration of a very flexible single link manipulator is proposed and experimentally realized. The control scheme consists of two actuators; a motor mounted at the beam hub and a piezoceramic bonded to the surface of the flexible link. The control torque of the motor to produce a desired angular motion is firstly determined by employing a sliding mode control theory on the equivalent rigid dynamics. The torque is then applied to the flexible manipulator in order to activate the commanded motion. During the motion, underirable oscillation is actively suppressed by applying a feedback control voltage to the piezoceramic actuator. Consequently, the desired tip position is favorably accomplished without vibration. Measured control responses are presented in order to demonstrate the efficiency of the proposed control methodology.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2384-2386
• /
• 2003

This paper presents an image processing method to recognize object's position from images for robot control applications. The Sobel Mask and the Dialated Gradient Mask algorithms are used to extract and refine the edge of the object. The inside of the extracted edge is filled with '1's for calculation of the center of mass to identify object's position. We propose a heuristic method which averages the positions of the objects in 10 frames to reject noises, and discuss the application of the proposed method to robot control.

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.306-312
• /
• 2017

Recently, development of robot technology has been actively investigated that industrial robots are used in various other fields. However, the interface of the industrial robot is limited to the planned and manipulated path according to the target point and reaching time of the robot arm. Thus, it is not easy to create or change the various paths of the robot arm in other applications, and it is not easy to control the robot so that the robot arm passes the specific point precisely at the desired time during the course of the path. In order to overcome these limitations, this paper proposes a new-media content management platform that can manipulate 6 DOF industrial robot arm using 3D game engine. In this platform, the user can directly generate the motion of the robot arm in the UI based on the 3D game engine, and can drive the robot in real time with the generated motion. The proposed platform was verified using 3D game engine Unity3D and KUKA KR-120 robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.875-881
• /
• 2014

The redundancy resolution of the seven DOF (Degree of Freedom) upper limb exoskeleton is key to the synchronous motion between a robot and a human user. According to the seven DOF human arm model, positioning and orientating the wrist can be completed by multiple arm configurations that results in the non-unique solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and its effect on the redundancy resolution of the seven DOF human arm model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing two cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid of the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each of two consecutive points along the task space trajectory. The contribution of each criterion on the redundancy was verified by the post processing of experimental data collected with a motion capture system. Results indicate that the bimodal redundancy resolution approach improved the accuracy of the predicted swivel angle. Statistical testing of the dynamic constraint contribution shows that under moderate speeds and no load, the dynamic component of the human arm is not dominant, and it is enough to resolve the redundancy without dynamic constraint for the realtime application.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.3
• /
• pp.298-308
• /
• 2000

In this paper a new two-arm cooperative assembly(or insertion) algorithm is proposed. As a force-guided control method for the cooperative assembly the adaptive accommodation controller is adopted since it does not require any complicated contact state analysis nor depends of the geometrical complexity of the assembly parts. Also the RMRC(resolved motion rate control) method using a relative jacobian is used to solve inverse kinematics for two manipulators. By using the relative jacobian the two cooperative redundant manipulators can be formed as a new single redundant manipulator. Two arms can perform a variety of insertion tasks by using a relative motion between their end effectors. A force/torque sensing model using an approximated penetration depth calculation a, is developed and used to compute a contact force/torque in the graphic assembly simulation . By using the adaptive accommodation controller and the force/torque sensing model both planar and a spatial cooperative assembly tasks have been successfully executed in the graphic simulation. Finally through a cooperative assembly task experiment using a humanoid robot CENTAUR which inserts a spatially bent pin into a hole its feasibility and applicability of the proposed algorithm verified.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.12
• /
• pp.1106-1114
• /
• 2012

To achieve synchronized motion between a wearable robot and a human user, the redundancy must be resolved in the same manner by both systems. According to the seven DOF (Degrees of Freedom) human arm model composed of the shoulder, elbow, and wrist joints, positioning and orientating the wrist in space is a task requiring only six DOFs. Due to this redundancy, a given task can be completed by multiple arm configurations, and thus there exists no unique mathematical solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and their effect on the redundancy resolution of the human arm based on a seven DOF manipulator model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing different cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid for the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each two consecutive points along the task space trajectory. As a first step, the redundancy based on the kinematic criterion will be thoroughly studied based on the motion capture data analysis. Experimental results indicate that by using the proposed redundancy resolution criterion in the kinematic level, error between the predicted and the actual swivel angle acquired from the motor control system is less than five degrees.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.1
• /
• pp.17-27
• /
• 2012

This study provides development information on Omni-Wheel Drive Rider Robot, futuristic electric scooters, with autonomous driving systems that are used for people including the disabled and senior. Also, it is meaningful in suggesting alternatives to replace motorized wheelchairs or electric scooters for the future. Prior to development of Omni-Wheel Drive Rider Robot with autonomous driving systems, it surveyed 49 people, including 18 people who own electric scooters and 31 senior people who have not. The summary of the survey is as follows. First, inconveniences during riding and exiting and short mileage due and safety driving to problems of recharging batteries are the most urgent task. For these problems, the study shows that charging time of batteries, mileage, armrests, footrests, angle of a seat are the primary considerations. Second, drivers prefer joystick over steering wheels because of convenience in one-handed driving against dangers from footrest and carriageways sloping roads, paving blocks. One-handed driving can reduce driving fatigues with automatic stop systems. Moreover, the study suggests many design factors related to navigation systems, obstacle avoidance systems, omni-wheels, automatic cover-opening systems in rainy.