• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.515-522
• /
• 1991

Determining the motion using optimal technique about traveling time and trajectory planning has been studied often in recent years, but the study of determining the optimal robot dimensions is rare, the authors attempt to find out the least driving torques and energy as the optimization of link length ratio referred to 2R SCARA and 3R robot manipulators. For the given linear path with triangular velocity profile, the inverse kinematic and dynamic problems are examined in order to lead into solution of problem, which is suggested for optimal design of link lengths. Accordingly, optimal link length ratio is obtained with respect to each case.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1133-1137
• /
• 1995

This paper presents a numerical method of the global search for an optimal geometric path for a manipulator arm amid obstacles. Finite term quintic B-splines are used to describe an arbitrary point-to-point manipulator motion with fixed moving time. The coefficients of the splines span a linear vector space, a point in which uniquely represents the manipulator motion. All feasible geometric paths are searched by adjusting the seed points of the obstacle models in the penetration growth distances. In the numerical implementation using nonlinear programming, the globally optimal geometric path is obtained for a spatial 3-link(3-revolute joints) manipulator amid several hexahedral obstacles without simplifying any dynamic or geometric models.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1052-1057
• /
• 1993

A scara type Direct Drive Arm(DDA) with two degrees-of-freedom is designed and implemented. The direct drive motor is used to furnish large torque to reduce the modeling error by the gear and chains. To control the DDA, a multiprocessor control structure with multirate dynamic control algorithm is designed. In the control algorithm, the dynamics of system is used to calculate the nominal control torque and the feedback controls are calculated with a parallel processing algorithm for each joint. The laboratory experiments on Hong-Ik DDA by dynamic control algorithm are presented and compared to that of PID control algorithm. This result shows that the proposed controller guarantees small trajectory error and stability. With this research, Hong-Ik DDA is expected to be utilized as A basic tool for robotics and control engineering.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.280-285
• /
• 1991

Neural network control has many innovative potentials for fast, accurate and intelligent adaptive control. In this paper, a learning control architecture for the dynamic control of a robot manipulator is developed using inverse dynamic neurocontroller and linear neurocontroher. The inverse dynamic neurocontrouer consists of a MLP (multi-layer perceptron) and the linear neurocontroller consists of SLPs (single layer perceptron). Compared with the previous type of neurocontroller which is using an inverse dynamic neurocontroller and a fixed PD gain controller, proposed architecture shows the superior performance over the previous type of neurocontroller because linear neurocontroller can adapt its gain according to the applied task. This superior performance is tested and verified through the control of PUMA 560. Without any knowledge on the dynamic model, its parameters of a robot , (The robot is treated as a complete black box), the neurocontroller, through practice, gradually and implicitly learns the robot's dynamic properties which is essential for fast and accurate control.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.533-538
• /
• 1991

In the design and operation of robot arms with flexible links, the equations of motion are required to exactly model the interaction between rigid motion and elastic motion and to be formulated efficiently. Thus, the flexible link is represented on the basis of the D-H rigid link representation to measure the elastic deformation. The equations of motion of robot arms, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated by using F.E.M. to model complex shaped links systematically and by eliminating elastic mode of higher order that does not largely affect motion to reduce the number of elastic degree of freedom. Finally, presented is the result of simulation to flexible robotic arm whose joints are controlled by direct or PD control,

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.3072-3079
• /
• 2000

Assembly tasks are often performed by one robot with fixtures. This type of assembly system has low flexibility in terms of the variety of parts and the part-presentation the system can handle. This paper addresses assembly without fixtures using two-manipulator robot. An active method using force feedback is proposed for the peg-in-hole assembly in highly uncertain environment. Assembly states are defined as status having unique motion constraints and events are modeled as variation of the environmental force. The states are recognized through identification of the events using two 6-d. o. f. force/moment sensors. The proposed method is verified and evaluated by experiments with round peg-in-hole assembly.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.248-253
• /
• 1992

In the development of a high speed and light weight manipulator, it is necessary to consider the structural elasticity of a robotic arm. The analysis of the infinite mode dynamic of robotic arm must be performed to obtain the finite mode modelling to achieve the feasible controller design of the robotic arm. The modelling procedure of the robotic arm is also illustrated. The controlled mode of the modelled dynamic can be derived by truncating the higher vibrational mode to result in the low order system for the sampling in the control signal is confined to the higher mode. And it is controlled by the pole assignment which can compensate the unmodelled dynamic effects. The unmodelled dynamic can result in the instability of the controlled system, which is known as spillover. The controller design of the low order system is simulated by the pole assignment and optimal control theory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.769-776
• /
• 2007

This paper proposes the human arm motion tracking algorithm based on the signal processing for surface EMG (electromyogram) sensors attached on both upper arm and shoulder. The signals acquired by using surface EMG sensors are processed with choosing the maximum in a short period, taking the absolute value, and filtering noises out with a low-pass filter. The processed signals are directly used for the motion generation of virtual arm in real time simulator. The virtual arm of simulator has two degrees of freedom and complies with the flexion and extension motions of elbow and shoulder. Also, we show the validity of the suggested algorithms through the experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.116-126
• /
• 2001

This paper suggests a numerical method to find optimal geometric path and minimum-time motion for a spatial 6-link manipulator arm (PUMA 560 type). To find a minimum-time motion, the optimal geometric paths minimizing 2 different dynamic performance indices are searched first, and the minimum-time motions are searched on these optimal paths. In the algorithm to find optimal geometric paths, the objective functions (performance indices) are selected to minimize joint velocities, actuator forces or the combinations of them as well as to avoid one static obstacle. In the minimum-time algorithm the traveling time is expressed by the power series including 21 terms. The coefficients of the series are obtained using nonlinear programming to minimize the total traveling time subject to the constraints of velocity-dependent actuator forces.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.611-617
• /
• 1986

In this paper, it is attempted to derive the minimum torque as the optimal value on each joint, which is applied during a PTP-motion in the range of working area of a supposed industrial robot. The rupposed industrial robot consits of 3-R joints prepared on three links, The optimizational analysis is performed by the formulation of a variational calculus process due to Rayleigh-Ritz method. That is, the torques of the inverse dynamic problem on joints in a arbitrary positions are computed by a generalized inertia matrix method.