• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.6
• /
• pp.632-638
• /
• 1997

The growing number of electronic components used in automobiles has given rise to problems concerning the increasing number, size and weight of the wiring harnesses. As an approach to resolve these problems, multiplexed wiring systems using automotive communication protocol such as Controller Area Network(CAN), Advanced PALMNET and J1850 have been developed by many automobile companies. In order to compare these protocols quantitatively, this paper presents the performance evaluation of CAN and Advanced PALMNET via discrete event simulation. Through numerous simulation experiments, several important quantitative performance factors such as the probability of a transmission failure, average system delay(data latency), and throughput have been evaluated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.12
• /
• pp.1179-1185
• /
• 2007

This paper presents a new approach to automotive embedded systems development and validation. Recently automotive embedded systems become even more complex and the product life cycle is getting reduced. To overcome these problems AUTOSAR, a standardized software platform and component based approach, was introduced. Model-based approach has been widely applied in the development of embedded systems and has strong benefits such as early validation and automated testing. In this paper cooperative development and validation of AUTOSAR and model-based approach are introduced and automated testing techniques are proposed. With the proposed techniques we can improve complexity management through increased reuse and exchangeability of software module and automated testing is realized.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.3
• /
• pp.251-257
• /
• 2012

Unmanned ground vehicles have important military, reconnaissance, and materials handling application. Many of these applications require the UGVs to move at high speeds through uneven, natural terrain with various compositions and physical parameters. This paper presents a framework for high speed autonomous navigation based on the integrated real time traversability. Specifically, the proposed system performs real-time dynamic simulation and calculate maximum traversing velocity guaranteeing safe motion over rough terrain. The architecture of autonomous navigation is firstly presented for high-speed autonomous navigation. Then, the integrated real time traversability, which is composed of initial velocity profiling step, dynamic analysis step, road classification step and stable velocity profiling step, is introduced. Experimental results are presented that demonstrate the method for a $6{\times}6$ autonomous vehicle moving on flat terrain with bump.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.5
• /
• pp.451-459
• /
• 2011

Fundamentally, there are 5 systems are needed for autonomous navigation of unmanned ground vehicle: Localization, environment perception, path planning, motion planning and vehicle control. Path planning and motion planning are accomplished based on result of the environment perception process. Thus, high reliability of localization and the environment perception will be a criterion that makes a judgment overall autonomous navigation. In this paper, via map matching using vehicle dynamic model and LIDAR sensors, replace high price localization system to new one, and have researched an algorithm that lead to robust autonomous navigation. Finally, all results are verified via actual unmanned ground vehicle tests.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.473-479
• /
• 2009

This paper proposes an efficient method to locate the automated guided vehicle (AGV) into a specific parking position using artificial visual landmark and vision-based algorithm. The landmark has comer features and a HSI color arrangement for robustness against illuminant variation. The landmark is attached to left of a parking spot under a crane. For parking, an AGV detects the landmark with CCD camera fixed to the AGV using Harris comer detector and matching descriptors of the comer features. After detecting the landmark, the AGV tracks the landmark using pyramidal Lucas-Kanade feature tracker and a refinement process. Then, the AGV decreases its speed and aligns its longitudinal position with the center of the landmark. The experiments showed the AGV parked accurately at the parking spot with small standard deviation of error under bright illumination and dark illumination.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.446-455
• /
• 2010

The research presented covers the design and control method of unmanned ground vehicle (UGV). An electric vehicle is used and is driven by DC motor. The power system on the UGV has been adjusted and actuators have been installed for steering and brake automation. A toggle switch is implemented to easily switch between manual and autonomous states. The UGV state is monitored by a velocity sensor, as well as steering and brake position sensors. An emergency stop device was designed and installed to quickly and safely stop the UGV. Different control methods, including the PID controller, were studied for improved steering responsiveness, and results were confirmed through experimentation. Satisfactory performance was achieved and several possible areas of future research have arisen.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.2 s.21
• /
• pp.5-13
• /
• 2005

The use of robot is no longer limited in the industrial scene, and becoming expanded toward many aspects of human life. Especially, military robot closely concerned with our lives seems to advance more and more in the future. As a need analysis for developing military robot, this project conducted a poll about Unmanned Reconnaissance Robot, and on the basis of the result, I suggested 3 directions of developing UGV(Unmanned Ground Vehicle) suitable to strategic environment of Korea.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.259-260
• /
• 2008

이 논문은 노인 및 장애인의 활동을 보조하기 위한 보행보조 로봇의 기술인 사용자의 진행하고자 하는 방향과 속도를 검출하는 보행 보조 로봇의 조향 장치를 구현 하고자 한다. 최근에 노인인구의 증가로 인해 노인 및 장애인을 위한 보행 보조기에 대한 관심이 증가되고 있다. 그러나 대부분의 경우 동력이 없는 시스템으로 경사 등의 공간에서 취약성을 가지 고 있다. 이에 동력형 보행보조기에 대한 관심이 증가되고 있다. 대부분의 경우 보행보조기의 제어가 조정한다는 의미가 적합하였다. 그러나 이 논문에서는 사용자의 움직임이 손에 전달되는 힘에 의해 사용자의 의지력을 파악 하는 두가지형태의 조향장치를 구현하였다. 첫째로 가변저항을 이용하여 보행의지를 파악하고, 두 번째로 힘센서를 이용하여 보행의지를 파악하였다. 위 두가지 센서를 기초로 사용자가 이동하고자 하는 이동 방향과 이동 속도 데이터를 기초로 보행보조기의 차량 속도와 방향에 대해 구동 바퀴의 차동 구동을 통해 사용자의 의지에 맞춰 구동할 수 있도록 하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.12
• /
• pp.1256-1265
• /
• 2011

Automated parking assist systems are being commercialized and rapidly spread in the market. In order to improve odometry accuracy, we proposed a practical odometry calibration scheme of Car-Like Mobile Robot (CLMR). However, there were some open problems in our prior work. For example, it was not clear whether the kinematic parameters always converged or not using the proposed calibration scheme. In addition, test driving had to be carried out "twice" without detailed explanation. This research aims to provide answers for the addressed questions though the convergence property analysis of the calibration scheme. In this paper, we evaluate on the effect of the kinematic parameter error on the odometry error at the final pose by numerical computation. The evaluation will show that the wheel diameter and tread of the CLMR can be calibrated by iterative test drives. In addition, the region of convergence in the parametric space will be discussed. Presented experimental results clearly showed that the proposed calibration scheme would be useful in practical applications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.6
• /
• pp.513-520
• /
• 2011

This paper presents the motion planning of robotic vehicles for the path tracking and the obstacle avoidance. To follow the given path, the vehicle moves through the turning radius obtained through the pure pursuit method, which is a geometric path tracking method. In this paper, we assume that the vehicle is equipped with a 2D laser scanner, allowing it to avoid obstacles within its sensing range. The turning radius for avoiding the obstacle, which is inversely proportional to the virtual force, is then calculated. Therefore, these two kinds of the turning radius are used to generate the steering angle for the front wheel of the vehicle. And the vehicle reduces the velocity when it meets the obstacle or the large steering angle using the potentials of obstacle points and the steering angle. Thus the motion planning of the vehicle is done by planning the steering angle for the front wheels and the velocity. Finally, the performance of the proposed method is tested through simulation.