• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.06a
• /
• pp.587-591
• /
• 1996

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.397-401
• /
• 2005

A different alternative method for simulating bit error rate(BER) performance of Satellite Digital Multimedia Broadcasting(DMB) in tunnel environments is presented. The method based on a channel model obtained by ray-tracing is able to support BER estimation over the channel presents arbitrary statistics that are difficult to fit to an analytic expression. The BER performance for System E over the tunnel fading channel that obtained by ray-tracing is predicted by the monte-carlo method. It can be observed that the BER performance for a straight tunnel channel is better than that for a line-of-sight(LOS) area in curved tunnel. Also, the BER performance for LOS areas in a curved tunnel outperforms that for non-line-of-sight(NLOS) areas in a curved tunnel. The BER performances for straight, curved LOS and curved NLOS tunnel channels are better than that for a Rayleigh channel(K=0) and less than that for a Rician channel with K=3. Moreover, for BER=10-3, it can be seen that there is approximately a $1{\sim}1.5\;dB$ difference between those three types of tunnel channels and a Rayleigh channel.

• Journal of Digital Contents Society
• /
• v.1 no.1
• /
• pp.39-52
• /
• 2000

In this paper, we derive the BER performance of an asynchronous DS/CDMA system and analyze the improvement of BER performance through turbo coding and RAKE receiver in multipath Rayleigh fading and impulsive noise environments. As a result, impulsive noise affects the performance of the system more than multipath fading in lower $E_b/N_o$ than a certain threshold. However, in higher $E_b/N_o$, multipath fading are more dominant than impulsive noise. It is found that in lower $E_b/N_o$, turbo code improves the performance of the system against impulsive noise, and in higher $E_b/N_o$, RAKE receiver improves the performance of the system against multipath fading. Therefore, great improvement can be obtained by employing turbo code and RAKE receiver in multipath Rayleigh fading and impulsive noise environments.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.155-165
• /
• 2005

Love wave and Rayleigh wave are the major elastic waves belonging to the category of the surface wave. Those waves are used to determine the ground stiffness profile using their dispersion characteristics. The fact that Love wave is not contaminated by P-wave makes Love wave superior to Rayleigh wave and other body waves. Therefore, the information that Love wave carries is more distinct and clearer than that of others. Based on theoretical research, the joint inversion analysis that uses the dispersion information of both Love and Rayleigh wave was proposed. Numerical analysis, theoretical model test, and field test were performed to verify the joint inversion analysis. Results from 2D, 3D finite element analysis were compared with those from the transfer matrix method in the numerical analysis. On the other hand, the difference of results from each inversion analysis was investigated in the theoretical model analysis. Finally, practical applicability of the joint inversion analysis was verified by performing field test. As a result, it is confirmed that considering dispersion information of each wave simultaneously prevents excessive divergence and improves accuracy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.635-642
• /
• 2000

We have been derived theoretically the SER's and CLP's of Wireless ATM (WATM) cells employing an OFDM/16QAM modulation scheme in wireless channel modeled as a frequency selective Rayleigh fading channel. The amount of the performance improvement of WATM- OFDM/16QAM systems adopting various coding techniques has been evaluated. In frequency selective Rayleigh fading channel, considering CLP : $10^{-3}$ as a criterion, it is observed that the performance improvement of about 14 dB is obtained in terms of $E_b/N_o$ by employing an OFDM scheme. It is also confirmed that convolutional coding technique gives better performance than the other coding techniques. Especially, when the convolutional codes are adopted to WATM-OFDM/16QAM systems, voice transmission services are sufficiently available with 5 dB of $E_b/N_o$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1351-1360
• /
• 1999

In frequency selective channels, conventional PN code acquisition schemes are not ideal candidates. This is because they are primarily designed for the AWGN channel. In this paper, a direct-sequence spread-spectrum(DSSS) PN code acquisition system based on digital matched filtering (DMF) with automatic threshold control(ATC) algorithm is presented and analyzed with regards to probability of detection and probability of false alarm. These two important probabilities, the probability of detection ($P_D$) and the probability of false alarm ($P_{FA}$) are derived and analyzed in considering Doppler shift, sampling rate, mean acquisition time, and PN chip rate in frequency selective Rayleigh fading channel when using serial-search method as detection technique. From computer simulation results of a DMF acquisition system model, it is shown that the performance of the acquisition system using ATC algorithm is better than that of constant threshold system.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.277-284
• /
• 2014

The NHPP software reliability models for failure analysis can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, finite failure NHPP models that assuming the expected value of the defect and infinite failures NHPP models that repairing software failure point in time reflects the situation, were presented for comparing property. Commonly used in the field of software reliability based on Rayleigh distribution software reliability model finite failures and infinite failures were presented for comparison problem. As a result, infinite fault model is effectively finite fault models, respectively. The parameters estimation using maximum likelihood estimation was conducted. In this research, can be able to help software developers for considering software failure property some extent.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.902-907
• /
• 2001

In this paper, we analyzed BER performance of the MC DS-CDMA system and evaluated the degree of performance improvement of the system caused by adopting turbo code recently receiving much attention due to its powerful coding capability. As a result of analysis, it was found that the MC DS-CDMA system without any powerful coding scheme can not serve voice quality $(BER : 10^{-3}$ regardless of the number of users and the value of $(BER : 10^{-3)$ in Rayleigh fading channel. On the other hand, it was found that the MC DS-CDMA system adopting turbo code for performance improvement, shows improved BER performance and can serve voice quality without regard to the number of users and the value of $(BER : 10^{-3)$ in the same channel. For example, when $(BER : 10^{-3)$ is l0dB and the number of users was 10, the MC DS-CDMA system adopting turbo code showed improved BER performance about $5\times10^{-3}$.

• Journal of IKEEE
• /
• v.16 no.2
• /
• pp.138-144
• /
• 2012

In this paper, a semi-analytical approach is proposed for DSF(Decode and Selective Forward)-Relay MC-CDMA(MultiCarrier-Code Division Multiple Access) systems over multipath Rayleigh fading channels. Considering BER(bit error rate) performance and complexity, the MMSE-C(Minimum Mean squared Error-per subCarrier) is used as the combining method for MC-CDMA systems. At first, the analytical method based on error-events at relay nodes for DSF-Relay schemes is utilized in order to derive the averaged BER. Then, the averaged BER is expressed as the form considering possible all error-events. Also, proposed semi-analytical expressions have been verified by comparing with simulation results. Finally, it is verified that the derived analytical expressions can be a frame work to cover different multipath Rayleigh fading channel conditions and to measure the upper performance for DSF-Relay MC-CDMA systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.4
• /
• pp.287-295
• /
• 1986

In this paper, a SBC(sub-band-coding) is proposed to code a speech signal for a digital mobile radio and a robustness of speech quality of the SBC over the Rayleigh fading channel is investigated via a computer simulation. First the Rayleigh fading channel and 16-ary DPSK receiver models are presentes and verified its validitties by comparing with theoretical values. Three different measures: SNR, LPC distance measure and subjective listening test, were used to evaluate the effects due to the Rayleigh fading channel errors. From the results of computer simulation at BER=$10_{-3}$, $10_{-2}$, 5$ imes$$10_{-2}$, it was found that the speech remained quite intelligible at BER=$10_{-2}$and the link is still usuable even at BER=5$ imes$$10_{-2}$ Thus it was concluded that the SBC can be applicable to the digital mobile radio on the Rayleigh fading channel error in the range of $10_{-4}$~$10_{-2}$ without emplowing any error correction codes.