• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.117-122
• /
• 2020

In this paper, we study the electromagnetic interference in adjacent antenna aperture of multi-function radar for Integrated MAST of naval ship, which is operating plural radars, with test result of two different X-band antennas. Two antennas is placed in the test fixture copying the part of Integrated MAST for the experiment. The test figure is modeled to see the electromagnetic interference when antenna beam is steered by using electromagnetic analysis tool. Also, 6 test scenarios is determined to verify experimentally and each test scenario is run in an anechoic chamber. At the test antenna #1 radiates a pulse signal and the signal from the antenna #2 is stored and analyzed in the optic data format through a receiving device. Based on the result, the effect of electromagnetic interference is suggested when multi-function radars in the Integrated MAST are operating in adjacent distance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1779-1786
• /
• 2000

Most of traditional design processes of mechanical parts are regarded as sequential and discrete, since different kinds of softwas should be introduced. In this paper, we develop an integrated fram ework for virtual design and performance testing of an automobile seat. The system is composed of four modules, i.e. CAD, static analysis, dynamic analysis, and draft drawing module. In the CAD module, PRO/ENGINEER 3D seat model is created using parameters to be modified with the result of static and dynamic analysis. In the static analysis, headrest tere used in each design stage make it difficult to feedback their results to upstream process. These discrete processes may result in time loss and cost rise. In recent years, life cycle of product is reduced. To have competence with others, new concept design processt is simulated using ANSYS. In the dynamic analysis module, FMVSS201 test is simulated using DADS. Overall data flow is controlled by Motif. The advantage of the system is that even a novice can perform and review the whole design process, without a good hand at professional design/analysis S/W in each stage. The system also provides a virtual design space, where engineers in different development stage can access common data of design models. The concept could be applied to other fields and it could reduce time and money required in design process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1B
• /
• pp.1-6
• /
• 2005

Communication network is in a transition toward the NGN (Next Generation Networks) to accommodate the explosive demand of new services. The NGN allows the third-party application provisioning by defining the networks as layers of Services, Distributed Processing Environment and Transport. Especially, the Service layer can further be divided into Application and Service Component layer. In order to realize the third-party application provisioning, the Parlay Group has adopted an open Parlay API as an interface between the Application and the Service Component layer. Using Parlay API, the third parties may develop and deploy the IT-based applications at the Application layer exploiting the service components located within network operators' domain. In this paper, we present the implementation details about the Third Party Call Control (TPCC) Service using the third-party service logic based on Parlay API and Parlay X API, when SIP is used as a signaling protocol in Transport layer. Also, we compare the performance evaluation of both implementations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.102-113
• /
• 2014

Present communication and network environment have been moving rapidly toward wireless and mobile base from existing wired internet base. This change of trend influences greatly on business methods accordingly. Therefore many enterprises are trying hard to adopt mobile business in order to gain competitive edge of their products and they are in need of more effective and stable mobile solutions. However, the method of establishing optimal mobile computing environment and how to handle existing business process and use vast amount of database are still needed. Therefore this paper tries to realize a mobile middleware system as a mobile business establishment supporting tool that could link various computational resource on wired internet with wireless LAN, mobile phone network, and mobile devices. To accomplish that specific goal, this paper provides a powerful tool of mobile and wireless application data access that could expand the line of business already set up in general enterprises easily and rapidly into mobile environment. When this suggested solution is applied in the field of industry, it can economically change legacy business process into mobile environment without having to change existing logic and resources at all.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.121-129
• /
• 2009

Today, it is difficult to re-use and share spatial information, because of the explosive growth of heterogeneous information and specific characters of spatial information accumulated by diverse local agency. A spatial analysis of subsurface spatial informa-tion, one of the National Spatial Data Infrastructure, needs related spatial information such as, topographical map, geologic map, underground facility map, etc. However, current methods using standard format or spatial datawarehouse cannot consider a se-mantic hetergenity. In this paper, the layered ontology model which consists of generic concept, measuremnt scale, spatial model, and subsurface spatial information has developed. Also, the current ontology building method pertained to human experts is a expensive and time-consuming process. We have developed the MDA-based metamodel(UML Profile) of ontology that can be a easy under-standing and flexiblity of environment change. The semantic quality of devleoped ontology model has evaluated by reasoning engine, Pellet. We expect to improve a semantic sharing, and strengthen capacities for developing GIS experts system using knowledge representation ability of ontology.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.31-38
• /
• 2009

Most 3D models found in the literature focus on theoretical topology for exterior 3D volumes. Although there are a few indoor models such as CityGML or IFC, implementing a full topology for the indoor spaces is either less practical due to the complexity or not even necessary in some application domains. Moreover, current spatial DBMSs do not support functionalities explicitly for 3D topological relations. In this study, an alternative method to build a 3D indoor model with less complexity ernativespatial DBMS is suggested. Focusnation the fact that semantic attributes can be storedion the floor surface, we suggestivemulti-layered 3D model for indoor spaces. We show the process to build the proposed model in the PostGIS, a spatial DBMS. And, then, as an example application, we illustrate the process to build and run a campus building information system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.1-6
• /
• 2002

Micro engine that includes Micro scale combustor is fabricated. Design target was focused on the observation of combustion driven actuation in MEMS scale. Combustor design parameters are somewhat less than the size recommended by feasibility test. The engine structure is fabricated by isotropic etching of the photosensitive glass wafers. Electrode is formed by electroplating of the Nickel. Photosensitive glass can be etched isotropically with almost vertical angle. Bonding and assembly of structured photosensitive glass wafer from the engine. Combustor size was determined to be 1mn scale. Piston in cylinder moves by fuel injection and reaction. In firing test, adequate engine operation including ignition, flame propagation and piston motion was observed. Present study warrants further application research on MEMS scale internal combustion power units.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.3
• /
• pp.35-46
• /
• 2016

Social network services (SNS) that help to build relationship network and share a particular interest or activity freely according to their interests by posting comments, photos, videos,${\ldots}$ on online communities such as blogs have adopted and developed widely as a social phenomenon. Several researches have been done to explore the pattern and valuable information in social networks data via text mining such as opinion mining and semantic analysis. For improving the efficiency of text mining, keyword-based approach have been applied but most of researchers argued the limitations of the rules of Korean orthography. This research aims to construct a database of non-standard Korean words which are difficulty in data mining such abbreviations, slangs, strange expressions, emoticons in order to improve the limitations in keyword-based text mining techniques. Based on the study of subjective opinions about specific topics on blogs, this research extracted non-standard words that were found useful in text mining process.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.27-32
• /
• 2007

3D based information is demanded increasingly as cities grow three dimensionally and buildings become large and complex. The use of 3D GIS is also getting attention as fundamental data for ubiquitous computing applications such as location-based guidance, path finding and emergency escaping. However, most 3D modeling techniques are focused on the visualization of buildings or terrains and do not have topological structures required in spatial analyses. In this paper, we introduce a method to incorporate topological relationship into 3D models by combining 2D GIS layers and 3D model. We divide indoor spaces of a 3D model into discrete objects and then define the relationship with corresponding features in 2D GIS layers through database records. We also show how to construct hallways network in the 2D-3D integrated building model. Finally, we test different cases of route finding situations inside a building such as normal origin-destination path finding and emergency evacuation.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.7-12
• /
• 2004

The technique of birdeye image generation of terrain through the use of satellite digital images and digital maps are very important elements and have applications in fanning establishment as well as the actual design of several construction works in complex fields. This paper studies stereo perspective image generation as a possibility through 3-dimensional analysis combined with digital elevation data and remotely sensed images. For this, first of all, ortho-images generated by very accurate GCP and DEM from contour file makes 3-dimensional terrain analysis possible and allows stereo­viewing at the highway construction planning sites. So, we developed the technical methods for the 3-dimensional approach on the planning sites of highways by use of perspective orthoimages. From this research, diverse terrain analysis is possible through stereo perspective image generation, and can leads to various application in road construction through gain study results from access to realtime virtual spatial on the objects area in korea.