• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.127-134
• /
• 2009

In this study, possibility of the laser eavesdropping is investigated on the window glasses with various thicknesses, Glass windows are excited by maximum length sequency (MLS) signal and the vibration sound is detected by a laser doppler vibrometer. From the detected sound, speech intelligibility is objectively estimated. Speech transmission index (STI), which is based on the modulation transfer function (MTF). is calculated for the estimation. Finally, disturbing wave effect on the speech intelligibility is analysed by using an outside speaker and a window shaker attached on the glass window. The purpose of the study is to estimate the possibility of remote eavesdropping by the laser sensor and to evaluate the performance of the homemade window shaker to protect from the remote eavesdropping.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.4
• /
• pp.147-150
• /
• 2014

In this paper, pulse current type power supply for laser diode dirver is discussed. High speed high power laser has been using widely because it becomes using on medical or manufacturing equipment, but researches have not being occurred actively. Current profiling method is proposed for improved lifetime expectancy of laser diode(LD). The current waveform of driving LD is most important factor of the performance and lifetime of LD. The proposed method improves shape and stability of current waveforms, thus will effect right direction of lifetime expectation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1799-1804
• /
• 2005

We have developed and estimated the measurement system of $CO_2$ and Nd:YAG laser power of wide range. The absorber is made of gold-plated copper cavity. The calibration heater is using a manganin(CuMn12Ni) coil, and output power is measured by using or resistance bridge with composed manganin and copper coil. Developed system can measure 5${\~}$1000W laser output power range. Calibration factors are 489.13J/mV at 100W and 497.04(J/mV) at 500W. correction factors are 0.99 at 100W and 1.006 at 500W.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1238-1244
• /
• 2011

This paper presents the matching method of reflectors for localization of laser navigation. The laser navigation is a device that measures distance and angle of reflector. The conventional major matching using the laser navigation is method that moves position of measured reflectors to position of installed reflectors and than rotate moved reflectors. However, it is difficult to use the industry because it has high computational complexity and high errors. To solve those problem, The proposed matching is method that create position of measured reflectors to assume that the position of installed reflectors is position of AGV and than rotate the position of installed reflectors. For experiment, we used AGV which was designed by ourselves, and compared positioning accuracy when AGV moves according to varying steering angle and driving speed.

• Journal of Korea Multimedia Society
• /
• v.9 no.9
• /
• pp.1131-1138
• /
• 2006

This paper proposes a novel method for grading of underground communication conduits by laser projection image analysis. The equipment thrust into conduit consists of a laser diode, a light emitting diode and a camera, the laser diode is utilized for generating projection image onto pipe wall, the light emitting diode for lighting environment and the image of conduit is acquired by the camera. In order to segment profile region, we used a novel color difference model and multiple thresholds method. The shape of profile ring is represented as a minimum diameter and the Fourier descriptor, and then the pipe status is graded by the rule-based method. Both local and global features of the segmented ring shaped, the minimum diameter and the Fourier descriptor, are utilized, therefore injured and distorted pipes can be correctly graded. From the experimental results, the classification is measured with accuracy such that false alarms are less than 2% under the various conditions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.245-250
• /
• 2015

We have developed an optical video transmission device for HD-SDI signal transmission. The optical transmitter/receiver unit operates at DC 5 volt and small enough to be attaced near surveillance camera. They have internal voltage regulating circuits to supply 3.3V to other circuits inside the unit. The optical transmitter is composed of cable driver, laser diode driver, and laser diode. The optical receiver is composed of photodiode, limiting amp, and cable equalizer. The wavelength of the trasmitter was 1.3 um, and optical power was -5dBm, and the speed was 1.485Gbps. The receiver sensitivity was -23 dBm. We confirmed that the optical device can transmit HD-SDI video through 30 km optical fiber without any interruption.

• 전기의세계
• /
• v.44 no.12
• /
• pp.25-30
• /
• 1995

광통신기술은 통신기술의 발달과정에서 1960년대에 등장한 새로운 통신기술로 몇 단계의 기술혁신을 거쳐 현재에 이르러는 보편화된 통신기술로 자리잡아 가고 있으며 2000년대 정보화 사회구축을 위한 핵심기술로 인식되고 있다. 이러한 광통신의 기본원리는 다음과 같다. 즉 우리가 통신에서 주로 이용하는 전화, 데이타, 영상정보등은 아날로그 또는 디지털 신호로서 이 신호들은 다중화 및 변조과정을 거쳐 고속전기신호를 구성하며, 이 고속전기신호를 광신호로 변환하는 반도체 레이저(LD: Laser Diode)에서 고속광 신호로 변환된다. 이 광신호는 전송손실이 매우 적은 광매체인 광섬유를 통해 40km - 100km 정도를 무중계로 전송된다. 전송된 미약한 광신호는 광검출기(PD:Photo Diode)에서 전기신호로 변환된 후 복조 및 역다중화과정을 거쳐 원래의 정보로 재현된다. 이러한 광통신원리를 이용한 광전송 기술은 기존의 동축이나 마이크로웨이브 전송기술에 비해 우수한 전송특성을 갖는다. 즉 광섬유가 가지는 거의 무한대의 전송대역폭(Bandwidth), 광소자의 높은 변조특성을 이용하여 현재에도 이미 10Gb/s급의 고속전송이 가능하며 2000년대 초반에는 수백 Gb/s급의 전송장치가 개발될 것으로 예상된다. 따라서 광전송기술은 현시대에 가장 경제적이고 신뢰성있는 통신수단으로 인식되고 있으며 초고속 정보 통신망 구축의 핵심기술이 될 것으로 예측된다. 이에 광전송기술의 발달과정, 차세대 광 전송기술 및 응용사례등을 살펴보고자 한다.

• Electronics and Telecommunications Trends
• /
• v.37 no.3
• /
• pp.41-51
• /
• 2022

This article presents an overview of the key technologies in the communications payload of broadband LEO satellite communications systems. In recent years, new developments have been realized for LEO satellite communications. SpaceX's Starlink, a technology leader in this field, offers premium services with satellites carrying in-house developed communications payloads. OneWeb, Amazon, Telesat, and Boeing are also developing LEO satellite communications payloads. The communications payload consists of user link antennas, inter-satellite link communications equipment, feeder link antennas, and a digital processor. Highly sophisticated technologies of compact active phased array antennas for generating multiple hopping beams and light laser communication equipment for ultra-high-speed inter-satellite communication will be applied to next- generation payloads.

• Information and Communications Magazine
• /
• v.32 no.2
• /
• pp.81-88
• /
• 2015

본 고에서는 최근 각광받고 있는 실내 위치측위 기술의 연구 동향을 설명하고, 향후 전망에 대해 분석한다. 스마트폰 및 태블릿PC와 같은 상용 단말의 보급과 위치기반서비스 시장의 확대에 따라 일반 사용자가 별도의 장비 없이 개인 단말을 이용하여 사용자 자신의 위치정보를 획득할 수 있는 실내 측위기술에 대해 많은 연구가 진행되고 있다. WiFi 인프라 기반 기술과 단말에 탑재된 관성항법장치 기반 기술에 대한 연구가 중점을 이루고 있으며, 이 외에도 음향신호, 레이저, LED 기반 가시광 통신, Bluetooth 등을 이용한 측위기술이 연구 중에 있다. 미래에는 차세대 이동통신 기술의 도입으로 Heterogeneous 네트워크 환경과 단말 간 직접 통신을 통한 무선애드혹네트워크 환경이 구성될 것으로 전망하며, 이에 따른 미래 실내 측위기술에 대해 간략히 기술한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.573-578
• /
• 2000

This paper presents a noble optical access system using shared laser and LED light sources, which is based on WDM-PON technologies. This system adopts an external modulation of the shared laser sources for high-speed downstream and a direct modulation of the LED sources for low-speed upstream. To split or combine the transmission channels, AWG(Arrayed Wave-guide Grating) devices are used in the optical cable section. The proposed system is attractive for low cost implementation. The laser light sources can share the optical carriers in the downstream scheme. Also, in upstream, the LED sources can afford to make simple of the circuits for controlling light source and of standardization for ONU(Optical Network Unit). The feasibility of the proposed system is demonstrated by several experiments. Our results show that the system operates well at 2.SGbps for downstream and up to 622.08Mbps for upstream.