• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.561-565
• /
• 1997

증기발생기 전열관 보수를 위하여 sleeve pipe를 삽입하여 레이저 용접을 하는 과정에서 전열관과 sleeve pipe 의 간격을 최소한으로 줄여 용접 품질을 높이고, 균등하게 하기 위하여 sleeve pipe에 대하여 확관이 수행된다. 확관은 sleeve pipe의 상단부와 하단부에 각각 수행되는데 정확한 확관규격을 유지하기 위하여 컴퓨터로 확관압력의 미분치를 비교분석하여 압력펌프를 제어하였다. 압력신호의 변화가 크고 안정되지 못하여 전후신호와 비교분석하여 안정화시킨 후 미분치를 추출하여 제어함으로써 전열관의 확관이 0.02mm 이내가 되도록 하여 전열관의 과도한 확관을 방지하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.449-453
• /
• 2016

하천 구역에 존재하는 인력 및 장비의 접근이 물리적으로 불가능한 공간에 대한 지형정보 취득의 한계를 극복하기 위한 대안으로 소형 UAV(Unmanned Aerial Vehicle)의 활용성을 살펴보고자, 낙동강 달성보와 강정고령보 사이에 위치하는 습지구간에 대한 영상촬영 및 분석을 통한 지형측량을 실시하였다. 홍수터 지형측량에 있어 소형 UAV를 이용한 사진측량의 신뢰성과 정확성을 평가하기 위하여, Network RTK를 이용한 육상측량결과와 정사영상 분석결과를 비교하여 '항공레이저측량 작업규정'의 '수치표고모델 규격 및 정확도'에 제시된 기준에 의거하여 수직위치 정확도를 검토하였다. 검토 결과 과대오차를 배제할 경우 지표면 상태에 따라 1/1,000~1/5,000의 정사영상 및 수치표고모델 제작이 가능함을 확인할 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.4 no.2
• /
• pp.226-232
• /
• 1993

A broadband CARS system is constructed for shot by shot measurement of a full CARS spectrum, which consists of a frequency doubled Nd:Yag laser, broadband mode-less laser and optical multi-channel analyzer installed in a double grating monochromator. To increase the accuracy of CARS temperature measurement and get better the fitting goodness, we have measured the slit function of the detection system and determined the analytical functional form of the slit function. Accuracy of the CARS system for temperature measurement is evaluated from the difference between the best-fit temperature of CARS spectrum and temperature of thermocouple reading. The uncertainty of the temperature measurement is found to be less than 1.5% in temperature range from 300 K to 1300 K.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.479-484
• /
• 2010

In the airborne laser survey with GPS/INS, based on kinematic, the installation and operation of GPS base stations is necessary to allow three-dimensional location coordinates to be obtained quickly and precisely. However, in many cases, GPS base stations operate under difficult conditions. In this paper, we investigate the substitutability of continuously operating reference stations (CORS) for base stations, and we examine the influence of the distance between aircraft GPS and CORS on the Z-value. The results of our study demonstrate that, if the performance of GPS base stations within regulation distance is replaced with that of CORS, sufficient accuracy is guaranteed. Moreover, the performance of CORS beyond regulation distance is fairly good.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.523-530
• /
• 2017

Laser-Induced Breakdown Spectroscopy (LIBS) which a plasma is irradiated at a specific wavelength depending on the material when a high-energy laser is irradiated, and a Raman spectroscopy which measures rotation and vibration in molecules as light-scattering phenomenon occurs, are attracting attention as a space exploration technology because of the advantages of high accuracy and real-time analysis, and the ability to perform long-range detection. In this study, the tendency of the laser spectrum according to the change of the soil component was analyzed by laser spectroscopy and the two - dimensional chemical distribution was conducted based on the trend of laser spectrum. We have also established the environment of Mars (4-7 torr) and lunar atmosphere (<1 torr) in experimental setup, to prove that it is possible to measure by difference of soil chemical composition using LIBS and Raman spectroscopy even in artificial space environment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.11
• /
• pp.921-933
• /
• 2018

There is a method to enhance the pure navigation performance of INS(Inertial Navigation System) through the rotation of inertial measurement unit to compensate error sources of inertial sensors each other and that INS using this principle of operation is called rotational INS. In this paper, the exact error analysis of rotational INS based on ring laser gyro considering the coupling effect with gravity and earth rate is performed to evaluate the navigation performance by inertial sensor error sources. And error analysis and performance evaluation result confirmed by modelling and simulation is also proposed in this paper.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.98-106
• /
• 2018

With the advancement in technology, miniaturization, integration, and weight reduction of satellite components have become possible. In this regard, existing medium and large satellites have been replaced by small satellites. As the demand for small satellites increases, the need for micro-thrusters has emerged for precise attitude and position control. A laser ablation micro-thruster, which generates thrust by using ablation jets that offer a wide range of thrusts and low-impulse thrusts, is considered as an alternative for micro-thrusters in small satellites. The objective of the present study is to introduce configurations of the laser ablation micro-thruster and its research trend.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.725-731
• /
• 2020

In mineral resource development, resource exploration is a task to find economical minerals on the surface and underground, and the success rate is low compared to the development and production stages, and it is necessary to collect a lot of data through exploration and accurately analyze the collected information. In this study, mine spatial information was constructed using a 3D (Three-dimensional) laser scanner, and accuracy evaluation was performed to obtain a maximum deviation of 0.140 m and an average of 0.095 m in the X, Y and Z directions, and the possibility of utilizing the construction of mine geospatial information through a 3D laser scanner could be presented. In addition, the ore body modeling was performed by applying the interpolation method of the ore body section using the resource exploration results. The ore body modeling result was superimposed with the modeling result of the mine geospatial information built through the 3D laser scanner to construct the ore body modeling result based on the precise mine geospatial information. The results of ore body modeling based on mine geospatial information built through research can increase the ease of data interpretation and the accuracy of the calculated data, which will greatly increase the efficiency of work related to mineral resource development and mine damage prevention in the future.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.219-224
• /
• 2001

Spectral phase interferometry for direct electric-field reconstruction (SPIDER) was fabricated and used to characterize pulses from a Ti:sapphire oscillator. In the SPIDER apparatus, two replicas of the input pulse were generated with a time delay of 200 fs and were upconverted by use of sum-frequency generation with a strongly chirped pulse using a 8-cm-long SFIO glass block at a 30-11m-thick type II BBO (p-BaBz04) crystal. The resulting interferogram was recorded with a UV-enhanced CCD array in the spectrometer. The spectral phase was retrieved by SPIDER algorithm in combination with independently measured pulse spectrum and the corresponding temporal intensity profile was reconstructed with a duration of 19 fs. As an independent cross-check of the accuracy of the method, we compared the interferometric autocorrelation (lAC) signal calculated from the SPIDER data with a separately measured lAC. The conventional, but unjustified, method of fitting a sechz pulse to the autocorrelation deceivingly yielded a pulse duration of 15 fs. This systematic underestimation of the pulse duration affirms the need for a complete characterization method. From the consideration in this paper, we concluded that the SPIDER could provide an accurate characterization of femtosecond pulses. ulses.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.285-289
• /
• 2017

Laser-induced breakdown spesctroscopy (LIBS) is a technique that complements the disadvantages of conventional laser-based combustion diagnosis techniques such as weak signal strength, complex equipment configuration, and low accuracy. In this study, basic research was carried out to measure the combustion gas temperature of scramjet engines using LIBS. Spray flames were generated from Jet A-1 fuel used in scramjet engines and gas temperatures were measured at the top of the flames with a calibrated thermocouple. The LIBS signals were acquired at the same points as the temperature measurement positions of the thermocouple. The LIBS spectra were analyzed to obtained a calibration curve between the LIBS signal and the reference temperature measured at the thermocouple. Therefore, it was confirmed that the combustion gas temperature can be measured in-situ using LIBS.