• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.1-9
• /
• 2012

In this paper, we presents the modeling and implementation of the DDS(Direct Digital synthesizer) driven offset PLL(Pghase Locked Loop) with DAC(Digital Analog Converter) for coarse tune. The PLL synthesizer was designed for minimizing the size and offset frequency and DDS technique was used for ultra low noise and fast lock up time, also DAC was used for coarse tune. The output phase noise was analyzed by superposition theory with the phase noise transfer function and noise source modeling. the phase noise prediction was evaluated by comparing with the measured data. The designed synthesizer has ultra fast lock time within 6 usec and ultra low phase noise performance of -120 dBc/Hz at 10KHz offset frequency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.101-106
• /
• 2005

A ground penetrating image radar (GPR) using an ultra wideband (UWB)impulse waveform is developed for non destructive detection of metallic pipelines buried under the ground. Dielectric constant of test field is measured and then a GPR system is designed for better detection up to 1 meter deep. By considering total path loss, volume of complete system, and resolution, upper and lower frequencies are chosen. First, a UWB impulse for the frequency bandwidth of the impulse is chosen with rising time less than 1 ns, and then compact planar UWB dipole antenna suitable for frequency bandwidth of a UWB impulse is designed. Also, to receive reflected signals, a digital storage oscilloscope is used. For measurement, a monostatic technique and a migration technique are used. For visualizing underground targets, simple image processing techniques of A-scan removal and B-scan average removal are applied. The prototype of the system is tested on a test field in wet clay soil and it is shown that the developed system has a good ability in detecting underground metal objects, even small targets of several centimeters.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.2 s.7
• /
• pp.81-87
• /
• 2005

In this paper, a VCDRO(Voltage Control Dielectirc Resonator Oscillator) for signal source of doppler radar system is designed and fabricated. The proposed VCDRO is made with new tuning mechanism using CPW line. The coplanar waveguide of $\lambda_{g}$/2 in length with varactor diode is placed on the metallization side under the dielectric resonator and coupled to it. Tuning varactor diode is mounted at one end of the CPW. The proposed circuit tuned by a CPW allows one more varactor diode to be mounted on the optimized CPW, where a greater sensitivity of frequency tuning is needed. With varying the biasing voltage for the varactor diode from 0 V to 15 V, output frequency tuning of 12 MHz is obtained. The PLDRO exhibits output power of 16.5 dBm with phase noise in the phase locked state characteristic of -115 dBc/Hz at 100 Hz, -105 dBc/Hz at the 10 kHz, and -102 dBc/Hz at 1 Hz offset from 10.525 GHz , respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1239-1247
• /
• 2012

In this paper, design and fabrication of solid state power amplifier(SSPA) using GaN HEMT chip for X-band frequency are presented. The SSPA consists of the power supply for stable power and the control unit for communication and controlling the internal module, the RF Part to amplify RF signal, In particular the adopted active device for the RF Parts is GaN HEMT Bare chip of TriQuint company, the RF parts consists of pre-stage, drive-stage, main power-stage and each amplifier is designed with input and out matching circuit. The developed power amplifier demonstrated more than 300 W peak output power in condition of 26 % duty, max. pulse width 100us for the X-band frequency( 500 MHz bandwidth) and can apply to marine radar systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1412-1422
• /
• 2010

A bistatic radar using the pulse chasing can detect a target to track successive transmitted pulses using a receive beam for effectively scanning the cosite search area. When tracking a transmitted pulse with the receive beam, some beam pointing errors within pulse-to-pulse can cause the timing error in received pulse and the variation of the signal strength. In this paper, we have proposed that some errors due to the receive beam pointing error could limit the MTI filter's performance and derived that the relationship between the MTI performance and the geometric factors which are the inherent properties in bistatic configuration. Through the simulation, we have considered the limitations of the improvement performance restricted by the receiving beam pointing error and confirmed the contribution to the performance improvement in maintaining the receiving beam pointing error of under 0.5 degrees.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.928-935
• /
• 2013

This paper proposed a combining technique of feature vectors which improves the performance of radar target recognition. The proposed method obtains more information than monostatic or bistatic case by combining extracted feature vectors from two receivers. For verifying the performance of the proposed method, we calculated monostatic and bistatic RCS(BRCS) of three full-scale fighters by changing the receiver position. Then, the scattering centers are extracted using 1-D FFT-based CLEAN from the calculated RCS data. Scattering centers are used as feature vectors for neural network classifier. The results show that our method has the better performance than the monostatic or bistatic case.

• Journal of Convergence for Information Technology
• /
• v.10 no.3
• /
• pp.16-21
• /
• 2020

This paper describes the jamming characteristics of a stand-off jammer jamming the LPI radar. The LPI radar reduces the side lobes of the receiving antenna to reduce the effect of jamming. It is easy a radar to predict the effect of jamming on a self-protection jammer where the jammer is in the same position as the target. However, for stand-off jammer jamming at different locations from the target, the prediction of jamming effect is complex. In this paper, the jamming effect of LPI radar is analyzed using signal to jamming ratio and burn-through range. Also, when the antenna's side lobe decreases below -30 dB, the stand-off jamming effect in the side lobe direction is weak. So we proposed a new jamming method for the main lobe and analyzed the jamming effect. This study is expected to be useful for the design and operation of aircraft jammers.

• Journal of Internet Computing and Services
• /
• v.20 no.4
• /
• pp.39-46
• /
• 2019

In recently years, it has become important to detect underground objects of various marterials including metals, such as detecting the location of sink holes and pipe. For this reason, ground penetrating radar(GPR) technology is attracting attention in the field of underground detection. GPR irradiates the radar wave to find the position of the object buried underground and express the reflected wave from the object as image. However, it is not easy to interpret GPR images because the features reflected from various objects underground are similar to each other in GPR images. Therefore, in order to solve this problem, in this paper, to estimate the piping position in the GRP image according to the threshold value using the CNN (Convolutional Neural Network) model based on deep running, which is widely used in the field of image recognition, As a result of the experiment, it is proved that the pipe position is most reliably detected when the threshold value is 7 or 8.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.163-170
• /
• 2017

MLAT which is an independent cooperative surveillance system is applied to increase the positon resoultin of secondary survelliance radar. MLAT uses the hyperboic or hyperboloid position mesurement algorithm. Central processing unit of MLAT calculates target position using time difference of arrival (TDOA) which can be solved from time of arrival (TOA) information of each receivers (at least 4 receivers). To increase position resolution of MLAT which use TDOA, TOA which is transfer time from tranmitter to receiver shold be calculated with precision time resolution in receiver. This paper explained the MLAT system briefly and explained ATD which is one of means of calcuating pulse position. ATD is applied to solve the deviation of pulse position due to different amplitude of signals in mulitiple receivers. In this paper, to analysis the performance of ATD, the simulation result of LAS and CDS was compared with the simulation result of basic threshold method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.120-128
• /
• 2012

In this paper, we propose a modified iterative pre-whitening projection statistics (MIPPS) scheme for improving multi-target detection performance in non-homogeneous clutter environments. As a non-homogeneity detection (NHD) technique of space-time adaptive processing algorithm for airborne radar, the MIPPS scheme improves the average detection probability of weak target when multiple targets with different reflection signal intensities are located in close range. Numerical results show that the conventional NHD schemes suffers from the masking effect by strong targets and clutters and the proposed MIPPS scheme outperforms the conventional schemes with respect to the average detection probability of the weak target at low signal-to-clutter ratio.