• Journal of Korea Water Resources Association
• /
• v.36 no.1
• /
• pp.13-21
• /
• 2003

The purpose of this study is to estimate Z-R relationships of between radar reflectivity and rainfall rate. The Z-R relationships estimated that rainfall events are selected at Yeongchun water level station where the discharge recorded from 1,000cms to 8,519cms in chungju dam basin. The result of Z-R relationship distributed at thirty two raingage sites, the constant values of A and $\beta$ are distributed between 26.4 and 7.4, 0.9 and 1.56 respectively. The correlation coefficients of standard Z-R relationships(Z=200Rl.6)shows that 0.63 lower than each other raingage sites(0.65~0.748).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1136-1140
• /
• 2009

지상강우 관측망을 이용한 강우량 측정의 대안으로서 사용되는 기상 레이더를 활용한 강우량 추정의 경우, Z-R 방정식을 이용하여 반사도를 강우량으로 환산하는 방법을 일반적으로 사용한다. 이때 발생하는 각종 오차는 레이더 장비가 가지는 기계적인 오차뿐만 아니라 Z-R 방정식이 가지는 오차 등이 있으며, 이를 보정하기 위해서 레이더를 활용하여 추정된 강우량에 지상강우량계와 레이더강우량과의 비율인 G/R비를 보정하는 방법을 일반적으로 사용한다. 본 연구에서는 이와 같이 레이더 강우량을 보정하기 위해서 사용되는 G/R비를 산정하는데 미치는 지형적인 효과를 고려하기 위해서 광덕산 레이더 유효범위 100km 내(군사분계선 이북 미포함)의 지역에 대하여 군집분석을 실시하여 크게 산악지역과 평야지역으로 구분하고, 각각 구분된 지역에 대하여 G/R 비를 산정하여 초기추정 레이더 강우량에 곱하는 mean-field bias 보정을 실시하였다. 광덕산 레이더 기상관측소의 유효범위 100km 내의 2007년, 2008년 홍수기(6/21${\sim}$9/20)기간 동안 94개 Automatic Weather Station(AWS)지점에 대하여 크게 산악지역과 평야지역으로 지역화 시키는 방법은 비계층적 군집분석 기법 중 fuzzy-c mean 방법을 적용하였다. 또한 광덕산 레이더 반사도 기본 자료는 차폐영역으로 생기는 반사도 데이터 누락을 보완하기 위하여 0도와 1.5도 sweep 합성 10분단위 uf 자료를 사용하였으며, AWS와 보정이 이루어지는 레이더 격자의 크기는 최대 4km${\times}$4km로 선정하였다. 본 연구에 있어서 검증방법은 지역을 구분하기 전과 후를 AWS 실측 관측값과 절대상대오차, 평균제곱근 오차로써 비교하였다.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.23-28
• /
• 2015

The detection field is an important sector of the factors influencing the battle field. Basically, The radar emits a radio wave to perform the detection in the existing way. However, When most existing radars identify target by signal processing to return radio wave, Environmental attenuation factor does not reflected. The radar using this radio wave has got the possibility changing detect result depending on attenuation factor by environmental conditions, The operational problems may arise in a real battle field. Therefore, In this paper, When emitted radio waves were come back, Reflecting the environmental attenuation factor, Experimental attempts to identify the target to enable more accurately.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.2
• /
• pp.100-105
• /
• 2014

This paper comparatively analyze to integration case to have a influence detection range estimation about radar cross section in radar system. This paper estimate detection range used to probability of detection in radar equation that used to swerling case 1 in case of radar cross section is small and used to swerling case 3 in case of radar cross section is large. Through simulation, coherent integration and non-coherent integration about swerling case difference were comparatively analyzed. Through simulation, non-coherent integration case is outstanding detection range and we known that coherent integration don't suitable for detection range estimation.

• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.51-58
• /
• 2017

This research focuses on convenient radar received power prediction method for detection predictions of North Korea SLBM(Submarine Launched Ballistic Missile). Recently, North Korea tested launching of SLBM which is threatening international security. Therefore, for active respondence to these threat, it is essential to analyze the radar detection prediction of SLBM. In this point of view, this work suggests a method for detection predictions for SLBM by simulating of RCS(Radar Cross Section) and wave propagation.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.81-94
• /
• 2013

The Radar altimeter transmits radio signals to the surface, receives the backscattered signals and measures the distance between the airplane and the nadir surface. The measurements of radar altimeter are affected by various factors on the surface below the aircraft. This study performed flight campaigns in June 2012 and acquired raw data from radar altimeter, LiDAR and other sensors. Based on the LiDAR DSM (Digital Surface Model) as a reference data, the characteristics of radar altimeter were analyzed in the respect of range and surface area affecting on the receiving power of the radar altimeter. Consequently, the radar altimeter was strongly affected by the surface area within beam width and reflectivity related to RCS (Radar Cross Section) rather than range.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.113-117
• /
• 2014

This paper comparatively analyze to integration case to have a influence detection range estimation about radar cross section in radar system. This paper estimate detection range used to probability of detection in radar equation that used to swerling case 1 in case of radar cross section is small and used to swerling case 3 in case of radar cross section is large. Through simulation, coherent integration and non-coherent integration about swerling case difference were comparatively analyzed. In the result of comparative analysis, non-coherent integration case is outstanding detection range and we known that coherent integration don't suitable for detection range estimation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.159-166
• /
• 2005

The pulse amplitude of a search radar signal received by an ES system is not constant pulse by pulse because of the radar's scan characteristics. The variation of the pulse amplitude causes the ES detection loss in the ES system. Therefore, the ES detection range equation should consider the ES detection loss caused by the search radar's scan characteristics. In this paper, we theoretically analyze the ES detection loss for the circular scar and propose the model to evaluate it quantitatively. The experiment results for the real search radar signals demonstrate that the proposed model is suitable for the evaluation model of the ES detection loss related to the circular scan of radars.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.367-379
• /
• 2022

In this paper, a multilayer radar absorbing structure was designed using the Particle Swarm Optimization (PSO) algorithm, and the characteristics of the multilayer radar absorbing structure were analyzed. It was shown that design values can be derived quickly and accurately by applying PSO to the design of a multilayer radar absorbing structure, and it is also shown that the optimal multilayer radar absorbing structure can be designed especially for an oblique incident. In addition, it was shown that the optimal value that meets the performance requirements can be determined even in a combination of various design parameters. It is presented through a comprehensive flowchart including the equations and detailed descriptions of all variables for each step. From the results of this paper, it is possible to omit complex and many calculations for designing a multilayer radar absorbing structure, and it is possible to use various composite materials. It can be utilized in the design and development of multilayer radar absorbing structures.

• Korean Journal of Remote Sensing
• /
• v.16 no.1
• /
• pp.65-72
• /
• 2000

Scattering coefficients of randomly rough lossy dielectric surfaces were computed by using the FDTD(Finite-Difference Time-Domain) method and the Monte Carlo method in this paper. The FDTD method was applied to compute electromagnetic wave scattering characteristics at any incident angles, any linear polarizations by dividing the computation region into the total-field region and the scattered-field region. The radar cross sections(RCS) of conducting cylinders have been computed and compared with theoretical results, measurement data and the results from the method of moment(MoM) to verify the FDTD algorithm. Then, to apply the algorithm to compute scattering coefficients of distributed targets, a two-dimensionally rough surface was generated numerically for given roughness characteristics. The far-zone scattered fields of 50 statistically independent dielectric rough surfaces were computed and the scattering coefficient of the surface was calculated from the scattered fields by using the Monte Carlo method. It was found that these scattering coefficients agree well with the SPM(Small Pertubation Method) model in its validity region.