• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.531-535
• /
• 2015

본 연구에서는 한반도 관측 공백지역인 북한지역에 대하여 레이더와 위성 원격탐사자료를 활용하여 강수량과 토양수분 등 수문기상정보를 생산 및 검증하고 효율적인 수문 모니터링 및 수문 기상 재해 감시와 평가 방안을 수립하고자 한다. 또한, 북한지역의 수문 기상 정보 수집 및 통합 DB를 마련하고 북한 수문기상 포털시스템을 구축함으로써 부처 간 자료를 공유할 수 있는 매개체를 마련하여 일관된 정책 수립과 효율적인 물관리를 도모하고자 한다. WPMM(Window Probability Matching Method)방법을 기반으로 구성된 RAD-RAR(Rain rate system) 산정 알고리즘(Rosenfeld et al., 1993)을 활용하여 산출된 합성 강우장 데이터의 정확성을 비교 분석하기 위해 접경지역 AWS 강수량과 세계기상통신망(GTS)기반 강수량을 산출하여 각각 레이더 강수량과 검증분석을 실시하였다. 연구기간은 2012년과 2013년 여름철 기간 중 5개의 기간을 선별하였다. 연구 기간 동안의 RAR 합성 강우장 데이터를 이용하여, 기간 중 1시간 동안 누적된 강수량을 산출하고 접경지역 AWS 강수량과 비교하였고 12시간 누적 강수량을 산출하여 GTS 강수량과 비교 분석을 실시하였다. 전반적으로 레이더 강수량에 비해 AWS 강수량이 더 높게 나타났으며 마찬가지로 레이더 강수량과 GTS 강수량의 비를 통해 레이더 자료가 상대적으로 과소추정되고 있음을 확인 할 수 있었다. 미항공우주국(NASA)과 일본항공우주국(JAXA)을 중심으로 진행된 GPM(Global Precipitation Measurement)미션은 한 개의 핵심위성과 마이크로파 복사계를 탑재한 10여개의 보조위성으로 구성되어 있으며, 매 3시간 간격의 전구 강수량 자료 생산에 목적이 있다. 이는 홈페이지를 통해 Level 1, 2, 3의 GPM 데이터를 배포하고 있다. 특히 Level 2 데이터는 언급된 3시간 간격의 전구 강수량 데이터를 제공한다. 이 경우 복사량을 강수량으로 변환하는 번거로움을 덜 수 있으며 NASA가 제공하는 Panoply라는 프로그램을 이용하여 한반도 강수 자료 가시화가 가능하다.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.125-134
• /
• 2023

In this paper, we propose an efficient surveillance RADAR(RAdio Detection And Ranging) interface control unit(ICU) design in the naval combat system. The proposed design applied a standardized architecture for modules that can be shared in ship combat system software. An error detection function for each link was implemented to increase the recognition speed of disconnection. Messages that used to be sent periodically for human-computer interaction(HCI) are now only transmitted when there is a change in the datagram. This can reduce the processing load of the console. The proposed design supplements the radar with the waterfall scope and time-limited splash recognition in relation to the hit check and zeroing of the shot when the radar processing ability is low due to the adoption of a low-cost commercial radar in the ship. Therefore, it is easy for the operator to determine whether the shot is hit or not, the probability of wrong recognition can be reduced, and the radar's resources can be obtained more effectively.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.98-105
• /
• 2003

We propose a new technique of deinterleaving multiple radar pulse sequences by means of genetic algorithm for threat identification in electronic warfare(EW) system. The conventional approaches based on histogram or continuous wavelet transform are so deterministic that they are subject to failing in detection of individual signal characteristics under real EW signal environment that suffers frequent signal missing, noise, and counter-EW signal. The proposed algorithm utilizes the probabilistic optimization procedure of genetic algorithm. This method, a time-of-arrival(TOA) only strategy, constructs an initial chromosome set using the difference of TOA. To evaluate the fitness of each gene, the defined pulse phase is considered. Since it is rare to meet with a single radar at a moment in EW field of combat, multiple solutions are to be derived in the final stage. Therefore it is designed to terminate genetic process at the prematured generation followed by a chromosome grouping. Experimental results for simulated and real radar signals show the improved performance in estimating both the number of radar and the pulse repetition interval.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.142-150
• /
• 2019

Muzzle Velocity is one of the most important measurement items for evaluation of ammunition. The muzzle velocity is defined as the velocity when the projectile leaves the muzzle. Particularly, since the muzzle velocity is closely related to the performance of the propellant, precise measurement of muzzle velocity is required. Doppler radar is used to measure the muzzle velocity, but the quality of Doppler radar signal depends on the test site environment. In this paper, a method to remove the clutter that degrades the signal quality of Doppler radar by improving the structure of the test site and the signal processing method is suggested. For the application of the improved signal processing method, a program for acquiring Doppler radar's raw Doppler data was created. Statistical verification of the velocity data obtained through the improvement of the test site structure and signal processing method proved that the proposed method is effective for the removal of clutter as compared with the existing method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.397-402
• /
• 2002

The IFSAR technique using SAR data has various applications and is the only latest technology to produce high precision height information from the radar phase data. This paper describes the whole implementation algorithm of IFSAR technique. Also it suggests the algorithms for azimuth aliasing resolution and interferogram generation of SAR data. Those are proved through the experiment: azimuth aliasing is resolved and interferogram is generated properly. Therefore, it proposes the method for interferogram generation, an essential process in extracting high precision height data, and the development approach to principal modules of IFSAR algorithm.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.156-159
• /
• 2010

본 논문은 전파의 다중경로에 의한 추적레이더의 추적 오차에 대한 분석과 모사 알고리즘 개발에 관한 것이다. 일반적으로 알려진 저고도 추적 레이더의 연구내용을 분석 하였고 이를 바탕으로 Matlab을 이용한 추적오차 계산용 수치해석 프로그램을 개발하였다. 본 연구에서는 고도 오차의 요인들을 분석하고 안테나 빔 폭, 확산계수, 지면의 반사계수 등을 고려한 오차 계산방법을 제시 하였다. 시뮬레이션 결과들이 이론적인 예측 결과와 잘 일치함을 볼 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.234-236
• /
• 2008

본 논문에서는 비행체 보호를 위해 널리 사용되고 있는 채프를 설계 할 때 효과적인 다이폴의 개수를 예측하기 위한 이론적인 계산이 수행 되었다. 채프를 레이더 사용주파수 전 대역(2~12GHz)에서 다이폴 안테나로 가정하고, 다이폴 안테나의 산란특성 분석을 통하여 레이더 반사단면적(RCS : Radar Cross Section)를 예측하였다. 기존에 소개된 이론을 기초로 Matlab을 이용한 RCS 계산 프로그램을 사용하여 계산한 결과를 비교 하였다.

• Korean Journal of Remote Sensing
• /
• v.21 no.2
• /
• pp.163-171
• /
• 2005

I have developed a processor for synthetic aperture radar (SAR) raw data compression using range-doppler algorithm for educational purpose. The program realized a generic SAR focusing algorithm so that it can deal with any SAR system if the specification is known. It can run efficiently on a low-cost computer by selecting minimum size out of a whole dataset, and can produce intermediate images during the process. Especially, the program is designed for educational purpose in such a way that Doppler centroid and azimuth ambiguity can be determined graphically by the user. By distributing the source code and the algorithm to public, I intend to maximize the educational effect on understanding and utilizing SAR data. This paper introduces the principle of SAR focusing algorithm embedded on the eSAR processor and shows an example of data processing using ERS-1 raw data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2911-2916
• /
• 2015

The CCTV is limited by weather conditions. To overcome this limitation, we develop a monitoring program that can sense the approach or recede of two or more objects within a surveillance system that uses a continuous-wave (CW) Doppler radar, and we proposed an algorithm to efficiently detect the approach or recede information of the object. The proposed algorithm separates the signal received by the CW Doppler radar into the real and imaginary parts using Fast Fourier Transform (FFT), and sums the amplitudes for each frequency to determine whether the objects are approaching or receding, using their locations. The algorithm is verified by simulations and experiments, which confirms that it successfully detects the approach or recede of two objects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1536-1541
• /
• 2009

In this paper, we present a novel pulse train identification method for two step stagger pulse train. Generally radar uses a fixed pulse train, and it is easy for electronic warfare system to measure the pulse repeat interval(PRI) and identify the radar. But it is very difficult to measure the PRI of stagger pulse radar because the pulse interval is periodically changed. We suggest a novel method to measure the PRI and identify the radars using the second deviation of pulse train. This method is faster comparing with Histogram method. We have a good PRI measurement results for 2 step stagger signals.