• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.462-467
• /
• 2022

The feedback buffer structure is proposed to alleviate the overshoot and undershoot phenomenon and the regulation of the output voltage. The conventional LDO regulator undergoes a regulation voltage change caused by a constant load current change. An LDO regulator with a feedback voltage sensing structure operates in the input voltage range of 3.3 to 4.5 V and has a load current of up to 150 mA at output voltage of 3 V. According to the simulation results, a regulation value of 6.2 mV was ensured when the load current uniformly changed to 150 mA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1154-1162
• /
• 2016

This paper proposes a fast-transient digital LDO(Low dropout) regulator with binary-weighted current control technique. Conventional digital LDO takes a long time to stabilize the output voltage, because it controls the amount of current step by step, thus ringing problem is generated. Binary-weighted current control technique rapidly stabilizes output voltage by removing the ringing problem. When output voltage reliably reaches the target voltage, It added the FRZ mode(Freeze) to stop the operation of digital LDO. The proposed fast response digital LDO is used with a slow response DC-DC converter in the system which rapidly changes output voltage. The proposed digital controller circuit area was reduced by 56% compared to conventional bidirectional shift register, and the ripple voltage was reduced by 87%. A chip was implemented with a $0.18{\mu}F$ CMOS process. The settling time is $3.1{\mu}F$ and the voltage ripple is 6.2mV when $1{\mu}F$ output capacitor is used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.704-712
• /
• 2016

Recently, the installation of photovoltaic (PV) systems has been increasing due to the worldwide interest in eco-friendly and infinitely abundant solar energy. However, the output power of PV systems is highly influenced by the surrounding environment. For instance, a string of PV systems composed of modules in series may become inoperable under cloudy conditions or when in the shade of a building. In other words, under these conditions, the existing control method of PV systems does not allow the string to be operated in the normal way, because its output voltage is lower than the operating range of the grid connected inverter. In order to overcome this problem, we propose a new control method using a DC-DC voltage regulator which can compensate for the voltage of each string in the PV system. Also, based on the PSIM S/W, we model the DC-DC voltage regulator with constant voltage control & MPPT (Maximum Power Point Tracking) control functions and 3-Phase grid connected inverter with PLL (Phase-Locked Loop) control function. From the simulation results, it is confirmed that the present control method can improve the operating efficiency of PV systems by compensating for the fluctuation of the voltage of the strings caused by the surrounding conditions.

• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.13-18
• /
• 2011

In this paper, we have examined electrical characteristics of LDO regulator according to the process variation using a 1 ${\mu}m$ 20 V high voltage CMOS process. The electrical analysis of LDO regulator have been performed with three kind of SPICE parameter sets (Typ : typical, FF : fast, SS : slow) by process variation which cause change of SPICE parameter such as threshold voltage and effective channel length of MOS devices. From simulation results, we confirmed that in case of SS type SPICE parameter set, the LDO regulator has 3.6 mV/V line regulation, 0.4 mV/mA load regulation and 0.86 ${\mu}s$ output voltage settling time. And in case of Typ type SPICE parameter set, the LDO regulatorhas 4.2 mV/V line regulation, 0.44 mV/mA load regulation and 0.62 ${\mu}s$ output voltage settling time. Finally, in the FF type SPICE parameter set, the LDO regulator has 7.0 mV/V line regulation, 0.56 mV/mA load regulation and 0.27 ${\mu}s$ output voltage settling time.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2831-2834
• /
• 2003

본 논문에서는 PWM 방식을 이용한 THERMO-CON 제어 회로를 제안하였다. 제안한 회로는 정전압을 형성하기 위한 레귤레이터, 신호를 처리하기 위한 op-amp, 삼각파를 만들기 위한 OSC, 그리고 부하의 상태를 감지하기 위한 AMC 와 ISC 로 구성된다. 테스트 결과 서지 전압인가 시 PWM 방식으로 동작하여 회로의 P/sub D/(Power Dissipation)을 줄여 소자의 파괴를 막고 중부하 시(여러 개의 릴레이 구동 시) PWM 동작을 하여 소자의 파괴를 막는다는 것을 확인하였으며, 출력 쇼트 시 쇼트보호회로에 의해 출력 트랜지스터의 파괴를 막는다는 것을 확인하였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.3 no.4
• /
• pp.62-69
• /
• 1989

휴대용 전기톱을 비롯한 학습 기계장치, 자동차 연동장치, 각종 화학 분석장치 및 산업용 로봇 시스템등의 전기설비에 광범위하게 응용되고 있는 고유 불안정 도립진자 시스템의 동적 안정화 제어기 설계기법이 소개된다. 복잡한 비선형 동특성을 고려한 수학적 모델링과 C. D. Johnson에 의해 제시된 외란 적응 제어 이론을 적응하여, 최적 레귤레이터형 안정화 제어기를 설계하였으며, 컴퓨터 시뮬레이션 및 실험결과가 만족스럽게 나타났다.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.399-402
• /
• 1988

In this paper, the relationship between stability and gain band-width product (GB) is clear ed by evaluating the feedback gain in the buck-boost switching regulator. Especially, considering the effect of the right-half-plane pole on the stability, we found available region of GB on the stability with the one pole compensation for the feedback circuit.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.235-239
• /
• 1989

This paper investigated the effect of right half plane zero on the transient response in the buck-boost DC-DC converter. And it is clarified that the damping ratio decreases gradually by increases of the feedback loop gain and the regulation system of the converter becomes unstable. From the result, we obtained the stability region about the duty ratio and the output current by evaluating the feedback loop gain.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.401-404
• /
• 1989

In this paper an optimal LQ controller is designed for the output characteristic improvement of buck-type switching regulators. State-space averaging method is adopted for modelling of switching regulators. The LQ controller is derived via an unified operator form for the application to both continuous-time and discrete-time control systems. Some design parameters of the LQ controller are chosen through a computer simulation and the LQ controller is implemented by analog circuits.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.367-369
• /
• 1986

Guaranteed cost control is a method applicable to a class of systems with uncertain parameters that guarantees an upper bound of the cost functional. This paper is concerned with a matrix decomposition technique used to yield a reasonable upper bound of the cost functional for a finite-time LQ regulator problem. The uncertain linear systems dealt with in this paper are described by a set of state equations of single-input phase-variable canonical form which contain unknown but bounded uncertain parameters.