• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.4
• /
• pp.679-691
• /
• 2020

In the future, 5G technology will become the core infrastructure driving the 4th industrial era. For intelligent super-convergence service, it will be necessary to collect various personal information such as location data. If a person's high-precision location information is exposed by a malicious person, it can be a serious privacy risk. In the past, various approaches have been researched through encryption and obfuscation to protect location information privacy. In this paper, we proposed a new technique that enables statistical query and data analysis without exposing location information. The proposed method does not allow the original to be re-identified through polynomial-based transform processing. In addition, since the quality of the original data is not compromised, the usability of positioning big data can be maximized.

• Journal of Internet Computing and Services
• /
• v.10 no.1
• /
• pp.11-17
• /
• 2009

Blind equalization techniques have been used in multipoint communication on which the research on the internet has focused. In this paper, a criterion of minimizing Euclidian Distance between two PDFs for adaptive blind equalizers has been presented. In order for ED expressed with Parzen PDFs to be minimized, we propose to use a set of randomly generated desired symbols at the receiver so that the PDF of the generated symbols matches that of the transmitted symbols. From the simulation results, the proposed method has shown superior error performance even in severe channel environments in which CMA has shown severe performance degradation. This indicates that the proposed algorithm can be considered relatively insensitive to ESR variations compared to CMA. As a field of ITL, ED minimization using Parzen PDFs has shown possibilities of being successfully applied to blind equalization.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.5
• /
• pp.432-439
• /
• 2015

MEMS solid thruster module is composed of solid thruster and its control board. It was developed for the purpose of an academic research. Therefore, thermo-mechanical design and verification for space usage were not considered in the design phase. To mount it on a cube satellite without any design modification, technical efforts at the system level structure design is required. In this study, we proposed a structural design concept to mount the MEMS thruster module by using brackets for guaranteeing structure safety under launch loads and easier mating and de-mating of MEMS thruster module during test phase. The effectiveness of the design has been verified through structural analysis and vibration test. In addition, electrical connection method using spring pins between MEMS thruster and control board is effective for guaranteeing the structural safety under launch vibration loads.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.49-55
• /
• 2007

Recently, with the IPTV services, e-learning, real-time broadcasting and e-contents, many application services need the multicasting routing protocol. In this paper, the performance of the algorithm to assign the rendezvous router (RP: rendezvous point) in the center-based multicasting mesh network is analyzed. The estimated distance to select RP in the candidate nodes is calculated, and the node minimizing the distance is selected as the optimal RP. We estimate the distance by using the maximum distance, average distance, and mean of the maximum and average distance between the RP and members. The performance of the algorithm is compared with the optimal algorithm of all enumeration. With the assumptions of mesh network and randomly positioned for sources and members, the simulations for different parameters are studied. From the simulation results, the performance deviation between the algorithm with minimum cost and optimal method is evaluated as 6.2% average.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.491-498
• /
• 2016

The software defined networks implement a software network control plane, which is physically separated from the data plane. For wide area software defined network deployments, multiple controllers are required, and the placement of these controllers influences importantly the performance of the software defined networks. This paper proposes a Tabu search algorithm, which is one of the meta heuristic algorithms, for an efficient controller placement in software defined networks. In order to efficiently obtain better results, we propose new neighborhood generating operations, which are called the neighbor position move and the neighbor number move, of the Tabu search algorithm. We evaluate the performances of the proposed algorithm through some experiments in terms of the minimum latency and the execution time of the proposed algorithm. The comparison results show that the proposed algorithm outperforms the existing genetic algorithm and random method under various conditions.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.31-40
• /
• 2005

In this paper, we develop an approach toward JSC(Joint Source-Channel Coding) method for MPEG-4 based FGS(Fine Granular Scalability) video coding and transmission in fixed and mobile receiving environment(Digital Audio Broadcasting, DAB). The source coder used MPEG-4 FGS video codec, the channel coder used RCPC(Rate Compatible Punctured Convolution) code and the modulation method used QPSK modulation. We have considered channel environment of AWGN and mobile receiving environment. This study determined optimum Trade-off point between source bit rate and channel coding rate in variable channel states. We compared FGS-JSC method and general single layer CBR(Constant Bit Rate) transmission. In this results, FGS-JSC was appeared better performance than CBR transmission.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.45-52
• /
• 2004

This Paper presents a modified hard decision Viterbi decoder with an error prediction circuit enhancing performance for the burst error inputs. Viterbi decoder employs the maximum likelihood decoding algorithm which shows excellent error correction capability for the random error inputs. Viterbi decoders, however, suffer poor error correction performance for the burst error inputs under the fading channel. The proposed error prediction algorithm increases error correction capability for the burst errors. The algorithm estimaties the burst error data area using the maximum path metric for the erroneous inputs, It calculates burst error intervals based on increases in the maximum values of a path metric. The proposed decoder keeps a performance the same as the conventional decoders on AWGN channels for the IEEE802.l1a WLAN system. It shows performance inproving 15% on the burst error of multi-path fading channels, widely used in mobile systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.116-124
• /
• 2016

This paper proposes a medium access control protocol for collision detection and resolution when a large number of sensor nodes transmits data in vehicle. The proposed protocol selects a random collision detection (CD) slot after data transmission, suspends its transmission and senses the channel to check whether a collision occurs by the detection of both energy level and jam signal. The proposed scheme uses multiple CD phases and in each CD phase, colliding stations are filtered and only surviving stations compete again in the next CD phase; thus, the collision resolution probability significantly increases. Simulation results show that the proposed protocol using the multiple CD phases has significantly better throughput than the conventional protocol. In addition, according to the number of CD phases and the number of CD slots per phase, the throughput aspect of the proposed scheme is investigated and the optimal parameters are derived.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.543-549
• /
• 2020

As the importance of security increases in various fields, research on a random number generator (RNG) used for generating an encryption key, has been actively conducted. A high-quality RNG is essential to generate a high-performance encryption key, but the initial pseudo-random number generator (PRNG) has the possibility of predicting the encryption key from the outside even though a large amount of hardware resources are required to generate a sufficiently high-performance random number. Therefore, the demand of high-quality true random number generator (TRNG) generating random number through various noises is increasing. This paper examines and compares the representative TRNG methods based on metastable-based and ring-oscillator-based TRNGs. We compare the methods how the random sources are generated in each TRNG and evaluate its performances using NIST SP 800-22 tests.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.52-60
• /
• 1999

Fabricability of phase shifted grating filters has been theoretically studied by an effective index transfer matrix method. In the optical band-pass filter with multiple ${\lambda}/4$ phase-shifts, the phase-shift error and random variation of the grating period should be suppressed such that corresponding resonance frequency lies within, the filter pass-band. The tolerance for the relative error is less than $10^3$, and is quite stringent in typical filters for WDM application. End facet reflection produces ripple in the transmission spectra and the reflectivity should be less than 1% in order to keep the ripple less than 0.25dB. Also, the effect of waveguide absorption loss is enhanced by the resonance in the filter, and the absorption should be limited to 1dB/cm for the signal loss of less than 0.2dB.