• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.21-26
• /
• 2019

In this paper, TE(transverse electric) scattering problems by a resistive strip grating between a double dielectric layer are analyzed by using the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the resistive boundary condition is applied to analysis of the resistive strip. The numerical results for the normalized reflected and transmitted power are analyzed by according as the width and spacing of resistive strip, the relative permittivity and thickness of the double dielectric layers, incident angles, and uniform resisitivity. Typically, the reflected power for the conductive strip increased as the value of the relative dielectric constant increased, the reflected power for the resistive strip with uniform resistivity decreased as the value of the resisvivity increased. The numerical results for the presented structure of this paper are shown in good agreement compared to those of the existing papers.

• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1211-1220
• /
• 2020

This research detects the features of the bright band (BB) through analysis of the vertical profile of range height indicator (RHI) and the slant range beam profile of plane position indicator (PPI) of the polarimetric radar measurements-horizontal reflectivity (ZH), differential reflectivity (ZDR), and cross-correlation coefficient (ρHV). As a result of the analysis, it is possible to clearly detect the bright band using the polarimetric radar measurements, and it is confirmed that the result is consistent by double searching for the BB using the RHI and PPI scan data at the same time. Based on these results, the accuracy of QPE (quantification of precipitation estimation) can be improved by applying the BB search method by the PPI slant range in this research to large rainfall radars that only scan PPI volumes in the field without RHI observations.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.619-624
• /
• 2023

In this paper, TE(transverse electric) scattering problems by a resistive strip grating between a double dielectric layer are analyzed by using the FGMM(fourier galerkin moment method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the resistive boundary condition is applied to analysis of the resistive strip. In order to deal with the problem of the double dielectric layer, numerical calculation was performed only when the thickness and relative permittivity of the dielectric layers had the same value. Overall, as the resistivity of the uniform resistivity increased, the current density induced in the resistive strip decreased, the reflected power decreased, and the transmitted power relatively increased. The numerical results of the structure proposed in this paper are shown in good agreement compared to the results of PMM, a numerical analysis method of the existing paper.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.641-646
• /
• 2023

In this paper, TM(transverse magnetic) scattering problems by a resistive strip grating between a double dielectric layer are analyzed by using the FGMM(fourier galerkin moment method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the resistive boundary condition is applied to analysis of the resistive strip. Overall, as the uniform resistivity of the resistive strip increased, the size of the current density induced in the resistance band decreased, the reflected power decreased, and the transmitted power increased. In addition, As the thickness of the dielectric layer increased, the reflected power increased and the transmitted power relatively decreased. The numerical results of the structure proposed in this paper are shown in good agreement compared to the results of PMM, a numerical analysis method of the existing paper.

• Journal of the Korean Chemical Society
• /
• v.53 no.3
• /
• pp.233-243
• /
• 2009

We have investigated the infrared spectra for CO adsorbed on silica supported nickel(Ni-Si$O_2$), silica supported copper(Cu-Si$O_2$), silica supported nickel-copper alloys(Ni/Cu-Si$O_2$) of several compositions with varying CO pressures(0.2 $torr{\sim}$50 torr) at room temperature and on pumping to vacumn at room temperature within the frequency range of 1500 $cm^{-1}{\sim}2500\;cm^{-1}$. Four bands(2059.6 $cm^{-1},\;{\sim}$2036.5 $cm^{-1},\;{\sim}$ 1868.7 $cm^{-1},\;{\sim}$ 1697.1 $cm^{-1}$) were observed for Ni-Si$O_2$, two bands($\sim$2115.5 $cm^{-1},\;{\sim}$1743.0 $cm^{-1}$) were observed for Cu-Si$O_2$ and five bands(${\sim}2123.2\;cm^{-1}$, 2059.6 $cm^{-1},\;{\sim}$2036.4 $cm^{-1},\;{\sim}$1899.5 $cm^{-1},\;{\sim}$1697.1 $cm^{-1}$) were observed for Ni/Cu-Si$O_2$. These absorption bands correspond with those of the previous reports approximately. The bands below 1800 $cm^{-1}$ were only observed with Ni metal or Ni/Cu alloy crystal plane containing step at room temperature and the ${\sim}1697.1\;cm^{-1}$ bands observed with Ni-Si$O_2$ and Ni/Cu-Si$O_2$ may be ascribed to CO molecule adsorbed on the adsorption sites near step. The bands below 2000 $cm^{-1}$ were rarely observed with Cu metal crystal plane at room temperature and the 1743.0 $cm^{-1}$ bands may be ascribed to CO molecule adsorbed on the adsorption sites near step. The band shifts of adsorbed CO with varing Cu contents from 0 to 0.5 mole fraction at the same CO pressure or at the same pumping time to vacumn were below 21 $cm^{-1}$. and comparatively small than those with other ⅠB metal addition. It may means ligand effect of Cu d electron is small.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.5
• /
• pp.57-65
• /
• 1996

초고속 정전유도형 정전전동기의 개발의 위한 기초연구로서 회전자 물질의 표면저항률, 비유전율 및 전하완하시정수의 변화에 따른 회전자의 회전속도특성을 조사하였다. 회전자표층물질의 비유전율 및 표면저항률은 클수록 회전자의 회전속도는 증가하였으며, 또한 이 두 요소를 곱한 회전지표면에 유도된 전하의 완화시정수가 클수록 회전속도는 증가하였다. 한편 회전자표층물질로서 도전성물질(Ti)을 폴리프로필렌 위에 불연속적으로, 즉 띠의 모양으로 증착한 시료를 사용하여 띠의 폭 및 경사각의 변화에 따른 회전자의 회전속도특성 및 토크 특성을 조사하였다. 이 경우 띠의 폭이 적어질수록 회전자의 회전수는 지수함수적으로 증가하였으며, 등간격으로 세분화한 것을 회전자의 축에 대해서 회전방향으로 경사각$\theta$만큼 기울였을 때 $\theta$=60。 및 150。일 때 회전자의 회전속도가 가장 큰 것으로 나타났으며, 특히 경사각 $\theta$=0。일때에 비해서 약 125[%]정도 높은 회전속도를 보였다. 최대토크 및 최대출력은 각각 {{{{25$\times$ { 10}^{ -6} [Nm]}}}}및 11.5[mW]이었다.

• The Korean Journal of Rheology
• /
• v.10 no.3
• /
• pp.121-130
• /
• 1998

본 연구에서는 카오스 스크류에 대해 비선형 동력학적 모델을 도입하여 카오스가 일어나는 경로를 밝히고 이를 수치적으로 증명하였다. 배리어가 계속존재하는 경우를 적분 가능계로 정의하고 공간주기적 상공간에서 두 개의 호모클리닉 궤도를 포함하는 원환체를 적분가능계의 모델로 도입하였다. 주기적으로 삽입된 배리어 없는 영역을 교란 으로 취급하 여 해 사상을 도입하여 면적 보존의 포인카레 단면을 정의 하였다. 호모클리닉 궤도가 깨어 져 칸토로 집합을 이룸을 설명했고 내부의 원환체는 공진띠와 KAM띠를 이루며 혼합을 방 해함을 설명했다. 다변유한요소를 이용한 완전 3차원수치해석을 통해 회전수 x/3에 해당하 는 공진띠의 존재를 보이고 교란이 큰 경우에는 거의 모든 영역이 무작위적인 혼합을 보여 주는 카오스 영역으로 바뀜을 보였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.72-80
• /
• 2020

The purpose of this study is to secure the same or more structural performance and constructability for the details of hooks cross-constructed at 135 degrees used as external-ties standard detail in RC columns, therefore, to the purpose of improving constructability, the clip-type binding implement was suggested and A total of 28 pull-out specimens were prepared with the parameters of concrete compressive strength and clip-embeded length, clip installation location to examine the anchorage behavior of the clip-type binding implement. The experiment was carried out. The results of the experiment confirmed that the anchorage strength of the clip-type binding implement was higher than the details of hooks cross-constructed at 135-degree regardless of the diameter of tie and concrete strength, embeded clip length, clip installation. and The 90-degree end hook with clip-type binding implement was showed a similar an anchorage behavior of 135-degree end-hooked transverse reinforcement, consequently, The 90-degree end hooked with clip-type binding implement is evaluated to be the same anchorage behavior and performance as standard 135-degree end hook detail.

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.490-495
• /
• 1994

We investigated photoreflectance of semi-insulating GaAs with respect to modulation sources, that is, modulation beam intensity, modulation frequency, temperature, and thickness of sample. PR spectra by each modulation source turned out to be signals of low electric field third differential, and band gap values of sample were fitted by least square root method for Aspnes' theoretical equation.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.349-350
• /
• 2001

엷은재첩 Corbicula papyracea (Heude)은 이치아강 (Heterodonta) 백합목 (Veneroida) 재첩과(Corbiculidae)의 패류로 모래가 많은 진흙 바닥에 서식한다. 소형종으로 옅은 황갈색 바탕에 녹색을 띠고 있다 각폭이 엷으며 성장맥이 나늘고 폭이 좁아 조밀하다. 패각의 내면은 보라색 또는 진한 보라색을 띠고 있다. 개체수가 많지 않다. 난태생을 하며, 전국적으로 분포한다 (권오길 외). (중략)