• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.13-24
• /
• 2010

This study examined each handiwork method of 4 filigree artifacts from Neungsan-ri temple site in Buyeo, Korea through material characteristic and microstructure analysis. As a result, it was indicated that all of the artifacts have comparatively higher purity than 22.7K and some of filigree artifacts showed that gold is alloyed with silver at a certain ratio. Gold thread that decorates surface showed thickness of 0.2~0.8mm and displayed various forms of section. Gold granule indicated that 2 or 3 granules are adhered together and they are 0.3~0.8mm in diameter. Trace of soldering was observed from gold thread and gold granule joints on surface and it confirmed a possibility of being soldering using gold solder through componential analysis. Also, it reveals a surface decorated with pigments such as cinnabar(HgS) and black.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.52-63
• /
• 2004

This study tries to investigate the differences in combination of gold and other metals used in the surface guilt of the gold-guilt relics found in the Seonwonsa Temple of the Korea Dynasty. Our findings are as follows. The gilded roller knobs found in the Seonwonsa Temple of the Korea Dynasty can be classified into three groups by the color of the surface guilt: gold, white-gold, red-gold. By the color it is found that gold type contains $Au\;81.0\%,\;Ag\;3.5\%,\;Cu\;5.6\%$, white-gold type contains $Au\;82.1\%,\;Ag\;10.6\%,\;Cu\;2.4\%$, and the red-gold type contains $Au\;59.9\%,\;Ag\;3.7\%,\;Cu\;33.2\%$. The gold metal used for guilt is found to be amalgam of Hg and the depth of the guilt was uneven with the average of $2.5\~25{\mu}m$. These gilded roller knobs were produced in two methods. One of them was made out of pure bronze, and the other out of bronze veneer and led. Since we found led on the outer surface, we conclude that the led juncture was later guilt with gold.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.2 no.2
• /
• pp.359-382
• /
• 1959

本文은 Proceedings of A.S.C.E 75卷 9號에 記載된 "High Velocity flow in Open Channels"를 要約한 것이다. 開水路의 高速度는 땜의 Spill way의 設計, 其他 急勾配水路의 設計에는 重要한 것이다. 數年前에 筆者가 한 實驗도 역시 超波速流에 關한 것이기 때문에 이 論文에 特히 關心이 있었든 것이다. 開水路內의 高速流에 關한 硏究의 歷史는 길다고 할 수 없을 것이며 이 論文도 1949年度에 發表된 것이다. 急勾配水路의 完全한 設計는 이 論文에 依하여 할 수 있게 되었다. 急勾配曲線 Spill way의 設計者에 對해서는 하나의 賽典이라 아니할 수 없을 것이다. 이 論文은 四篇으로 되어 있으며 第一篇은 Ippen에 依하여 硏究된 “高速流의 力學的考察”, 第二篇은 Knapp에 依하여 硏究된 “高速流에 對한 曲線水路의 設計” 第三篇은 Ippen 및 Dawson의 “幅이 縮小하는 水路의 設計” 第四篇은 Rouse의 “幅이 擴大하는 水路의 設計”가 各各 取扱되어 있다. 第一篇은 理論的 乃至 基礎的인 問題를 取扱하고 實際의 設計를 취급한 第二篇 以下의 基礎가 되어 있다.

• Journal of Conservation Science
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2000

In 1993, many bronze artifacts were excavated from the Sanoesa Temple(思惱寺), Chongju, Chungbuk. Twelve items were selected and chemically analyzed with AA Spectrometry and ICP-Atomic Emission Spectrometry. They were also observed under the optical microscopy and SEM. According to the results from chemical analysis, production method and use, these artifacts were classified into four groups: casting, wrought and welding products, and bells. Cast products, probably used for ritual, were alloy of 70% Cu, 10% Sn and 20% Pb. They showed ${\alpha}+{\beta}$ phase as a typical microstructure of casting. The ${\delta}$ phase was rarely observed due to the small amount of Sn. These artifacts included more lead than other alloys. They showed segregation like island-shape on the lead part. Wrought products used for daily too1s. were alloy of 80% Cu and 20% Sn. Since they were consist of ${\alpha}$ phase and martensite ${\beta}$ phase, it could be presumed that they were heat-treated. The production method could be identified from twinned grains in ${\alpha}$ phase. Lead was not included in because it had a bad effect to alloy. The bells were alloyed with 85% Cu, 10% Sn, 5% Pb or 90% Cu and 10% Sn. They show the dendrite structure because they were cast and alloyed with many tin. Weldinged were alloyed with 83% Cu, 12% Sn and 5% Pb. lt showed the fine dendrite structure because of fast cooling in air.

• Journal of the KSME
• /
• v.18 no.4
• /
• pp.35-40
• /
• 1978

여기서 상기 ASME Code에 대하여 간단히 설명하기로 한다. ASME Code 는 첫부분에서 ASME Code의 적용을 받아야 하는 압력용기를 정의하고, 압력용기의 건설에 관한 일반원칙을 설명한후 그 다음에는 세개의 Subsection으로 나뉘어져 있다. 즉 Subsection A General Requirements Subsection B Requirements Pertaining to Methods of Fabrication of Pressure Vessels Subsection C Requirements Pertaining to Classes of Material 여기서 Subsection A는 압력용기 재료나 제작방법의 상위와 관계없이 적용하여야 할 일반적인 요구사항을 규정한 것이며, Subsedction B에서는 압력용기의 제작방법을 용접,리벳팅,단조,경납 땜의 4가지로 나누어 각 제작방법에 따른 특수 요구사항을 규정하였고, 마지막으로 Subsection C 는 재료에 따른 특수 요구사항을 규정한 것이다. 이 각 Subsection은 다시 General, Materials, Design, Fabrication, Inspection and Tests, Stamping and Reports, Pressure Relief Devices로 나누어 이에 대한 각각의 요구사항들을 설명하고 있다. 그러나 이 기술기준에서는 제정방향으로, 다음의 목차에서도 알 수 있는 바와 같이 이들의 순서를 바꾸어 총칙,재료,설계,제작, 검사 및 시험, 압력릴리프장치를 배치한 후 이미 KS B 6231에 제정되어 있는 것은 그 규정을 대부분 그 대로 인용하였고, 그렇지않은 것은 우리의 실정을 참작하여 삭제, 보완, 수정하였다. 삭제한 내용 중 대표적인 것으로 공인검사관(Authorized Inspector) 및 Stamping and Reports 에는 9개의 Mandatory Appendix 와 16개의 Nonmandatory Appendix가 있는데, 이둘 중 이 기술기준에서 필요하다고 생각되는 것은 발췌 수록하였다. 단위에 대해서는 국가시책에 따라 메트릭 시스템을 사용하였고 단위의 환산에서 야기되는 소수점등의 처리는 공학적인 판단에 의거하였다.

• The Science & Technology
• /
• v.9 no.8 s.87
• /
• pp.23-27
• /
• 1976

우리나라에서 본격적으로 물리탐사를 시도한것은 1958~1960년에 실시한 항공자력탐사로서 그후 현재까지 불과 20년이 지나지 않았다. 그간 물리탐사의 기술발전으로 자원탐사분야에 많은 공헌이 있었다. 현재까지 주로 적용된 분야는 철자원탐사를 위한 자력탐사, 지하수조사를 위한 전기비저항탐사동, 연등의 통화금속광물탐사를 위한 각종 전기탐사, 제3기층 지질구조와 땜공사, 공업단지조성등의 기반암조사, 그리고 광산의 갱내 출수조사등을 위한 탄성파탐사, 우라늄자원을 위한 방사능탐사, 그리고 해저지질 및 자원조사를 위한 해상물리탐사등이다. 이와 동시에 석탄층조사를 위한 전기탐사 및 Model연구자력탐사의 전산처리 적용, 그리고 광물 및 암석의 물리적 성질등 학술분야에 대한 기초연구도 계속하여 왔다. 우리나라에 있어 물리탐사의 적용조건은 비교적 험악한 지형, 복잡한 지질구조, 광상의 불규칙 또는 소규모의 발달과 산재등이다. 이와 같은 특징은 탐사해석의 정도를 높이기 위하여 보다 고도의 과학기술문제의 해결을 요구하고 있으며 이와 동시에 현대적 탐사방법과 연구개발로 대상자원의 탐사지역확대와 지하심부 탐사등이 당면과제이다. 기술과제로서는 석탄 및 기타자원에 대한 물리검층탐사, 경상계 지질구조구명을 위한 탄성파탐사 및 동력탐사의 적용, 항공자력, 전자 및 방사능탐사 및 해양의 각종물리탐사의 기술개발이 있으며 그외 탐사자료의 전산처리기술 및 지구과학의 기초연구등이 있다.

• 한국해양학회지
• /
• v.5 no.2
• /
• pp.52-58
• /
• 1970

Concentrations of the total, dissolved and particulate iron in waters of Lake Eui-Am have been determined spectrophotometrically on August 14, 1970. O-phenanthroline was the reagent used. Iron contents of the lake water were varied by the station and depth. Analyses showed variations in the total iron ranging from 238 to 2,643 ${\mu}$g/l (mean value 1,028${\mu}$g/l); the dissolved iron varied from 34.5 to 137.7 ${\mu}$g/l (mean value 83.0${\mu}$g/l), and the particulate iron varied from 179 to 2,544 ${\mu}$g/l (mean value 943 ${\mu}$g/l). Three forms of iron tend to increase with depth. This is believed that the suspended matter plays an important role in regulating of iron contents in summer season.

• 한국해양학회지
• /
• v.5 no.2
• /
• pp.59-64
• /
• 1970

The purpose of the study was to gather basic bacteriological data regarding the quality of Korean surface waters. Total coliforms, fecal coliforms and fecal Streptococci survey in the water of Lake Eui-Am were undertaken by the membrance filter technique. A total of 37 samples were collected in August 14, 1970. Total coliforms were detected in all samples, fecal coliforms and fecal Streptococci were detected in 68% and 82% of samples, respectively. Bacterial densities of the lake water were varied by station and depth. The numbers of bacteria per 100ml of the lake water were; 8-225(65.3 average) for the total coliforms, 0-112(26.2 average) for the fecal coliforms, 0-77(25.8 average) for the fecal Streptococci, and 8-302 (91.1 average) for the total number of total coliforms and fecal Streptococci. These results suggest that the Eui-Am lake water is only lightly polluted and indicate that the lake water, properly maintained, is a source of raw water of good bacteriological quality. Three forms of fecal pollution bacteria tend to increase with depth. This is believed that the suspended matter with conglomerated bacteria plays an important role in regulating of bacterial densities in summer season.

• Conservation Science in Museum
• /
• v.16
• /
• pp.4-13
• /
• 2015

In most gold objects crafted using the granulation technique that have been thus far discovered in the Korean Peninsula, granules were joined using a soldering alloy of gold and silver. However, it was recently revealed through SEM-EDS analysis performed on the ornamented dagger sheath from Gyerim-ro Tomb No.14 in Gyeongju that the gold granules were joined to the surface of this sheath using an entirely different technique. The gold granules on the Gyerim-ro dagger sheath are evenly sized and shaped, the surface has a dendritic texture. Dendritic textures are a characteristic feature of metal alloys, not observed in pure metals. As a matter of fact, the gold granules were made of a ternary alloy of 77wt% Au, 18wt% Ag and 4wt% Cu. Due to this component, the alloy has a melting point below 1000℃ (approximately 980℃), which is significantly lower than 1064℃, the melting temperature of pure gold. This makes it possible to join the gold granules directly to the surface of the sheath by briefly heating them to high temperature, without the use of soldering or any other media. When examined through SEM image, the surface of the sheath showed no traces of soldering, it suggests that the granules were joined through unaided fusion.

• Conservation Science in Museum
• /
• v.26
• /
• pp.143-160
• /
• 2021

The Seoul Baekje Museum has been conducting excavations at the Ancient Tomb Complex in Seokchon-dong, Seoul (Historic Site No. 243), known to be tombs of the royal family and the ruling class during the Hanseong period of the Baekje Kingdom. In this study, gold earrings that were revealed during the excavation underwent scientific analysis and conservation treatment. Stereo microscopy, SEM, X-ray imaging, CT, and XRF were applied in the analysis, and the characteristics, internal structure, and composition of the earrings as well as their production method were investigated. The results confirmed that the main hoops of the gilt-bronze earrings were made of copper cores gilt using mercury amalgamation. The findings also revealed that the hexahedron in the middle pendant was made by connecting small rings using molten gold powder, and the pendant sphere at the end was formed by soldering two hemispheres. As for the two thin-hoop earrings, they showed similar surface compositions but were made using different methods, with one made from a copper core wrapped with a gold plate and the other made by bending a gold rod. The gold content varied depending on the item and the place of measurement, but overall the earrings showed a relatively high gold content of approximately 19 to 21K. The purity of the golden earrings and the sophisticated manufacturing techniques applied indicate the high status of the buried person and of the tomb complex in Seokchong-dong.