• Proceedings of the Korean Statistical Society Conference
• /
• 2002.05a
• /
• pp.119-125
• /
• 2002

우리는 본 논문에서 디지털 영상에 대하여 Hash함수를 이용한 내용기반의 안전한 워터마킹 인증기술을 제시하려고 한다. 허가되지 않는 이미지의 내용변경을 막기 위해 안전한 워터마킹 시스템을 개발하기 위하여 비밀키를 가지고 있는 Hash 함수가 사용되었고, 각 블록의 워터마크신호는 Hash함수의 출력결과를 Seed로 사용하여 의사난수를 발생시킨 값에 따라 생성되어진다. 이미지 기술벡터들은 블록기반 에지 이미지로부터 측정되는데 이 값들은 해롭지 않는 조작 등에 대해서는 쉽게 변화하지 않지만 고의적인 내용변경 등의 조작에 대해서는 이들 값들이 바꾸어지는 성질을 갖고 있다. 워터마크신호의 삽입은 블록기반 스펙트럼 방법에 기초를 두고 있으며 워터마크신호의 크기는 인지성과 강인성이 조화를 이루도록 AC 부 밴드의 지그재그 스캔라인의 DCT 계수들의 지역적인 통계량에 따라 조정되어진다. 또한 저작권인증의 확인을 위한 경계 값의 선택은 통계학적으로 분석되어진다. 수치적인 실험의 결과는 제안된 기술이 강력한 저작권인증의 수행을 위해서 매우 효율적인 것을 보여주고 있다.

• Science of Emotion and Sensibility
• /
• v.10 no.4
• /
• pp.631-637
• /
• 2007

This research focuses on similarity evaluation of images according to tones of images. Color space of images were converted RGB color space into HSI color space. The information entropy criteria has been taken for evaluating similarity of images for digital library. The similarity was then calculated by combining correlation coefficients and information entropy. Those two values are further analyzed with a relation to human sensibility.

• Composites Research
• /
• v.33 no.3
• /
• pp.125-132
• /
• 2020

The polymerization shrinkage behavior of dimethacrylate-based composite (Clearfil AP-X, Kuraray) and silorane-based composite (Filtek P90, 3M ESPE) used for dental composite restorations was measured using digital image correlation method. The stress distribution on the surface of specimen was calculated by finite element analysis with equivalent elastic modulus and was compared with the measured shrinkage distribution. Camera images were monitored by a CCD camera during and after the irradiation of light. As a result of the DIC analysis, a non-uniform shrinkage distribution was observed in both composite resins, and the resin core inside the ring specimen had free flowability, leading to in greater shrinkage strain than the resin/ring interfacial region. It was observed that as the distance from the center of the resin increased, the radial average shrinkage strain decreased. The radial average shrinkage strain during light irradiation occurred to be 33% for P90 and 57% for AP-X of the entire strain at the end of the test. The shrinkage behavior of P90 and AP-X was measured to be significantly different from each other during light irradiation. In the resin near the resin/ring interface, it was confirmed that the tensile strain rapidly formed to increase after light irradiation, causing a tensile stressed, interface weak.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.309-316
• /
• 2010

In this study, a digital particle holographic system and its application to channel-flow measurements were investigated. A double-exposure hologram recording system that is capable of recording digital holograms in a short time interval was developed. A correlation coefficient method was used to determine the focal plane of particles. The Wiener filter was used to remove noises and improve image quality. Two-threshold and image segmentation methods were used for binary image transformation. The cross-correlation method was used for particle pairing. The developed system was employed to study channel flow fields, and the axial velocities of channel flow were measured. The measurement errors are acceptable, and this proves the feasibility of using the digital particle holographic system as a good tool for flow-field measurements.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.557-560
• /
• 2010

고성능의 보급형 디지털 영상장비와 레이저프린터의 보급으로 인해 인쇄물의 불법적인 위변조가 사회적 문제로 대두되고 있고, 관련 범죄 또한 증가하는 추세이다. 이에 따라 디지털 포렌식 기술에 기반한 촬영 및 인쇄기기 식별 기술들이 연구되고 있다. 본 논문에서는 인쇄기기별 특성에서 기인하는 인쇄물의 노이즈 특성을 이용해 인쇄기기를 판별하는 알고리즘을 제안한다. 이산 웨이블릿 변환과 위너 필터를 이용한 노이즈 특성 추출 방법을 설명하고, 추출된 노이즈 특성에서 명암도 동시발생 행렬을 계산하고 왜도, 첨도, 공분산, 상관계수의 특징을 추출하였다. 추출한 특징을 서포트 벡터 머신에 적용하여 디지털 인쇄기기의 제조사와 모델을 판별하였다. 제안한 알고리즘의 성능을 분석하기 위하여 7대 프린터에서 각 371장씩 출력된 총 2,597장 이미지로 실험하였고, 제안한 알고리즘이 기존 방법에 비하여 높은 정확률을 나타냄을 보였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.6
• /
• pp.26-32
• /
• 2015

In this study, it is evaluated for fracture toughness to analyze crack resistance properties of particulate reinforced composite propellant. Fracture toughness test using WST specimen is conducted by temperature conditions from $50^{\circ}C$ to $-60^{\circ}C$. Evaluation method for fracture toughness calculated using an equation suggested by ASTM E399 with linear elastic fracture mechanics. From these result, splitting loads and stress intensity factors of propellant increase according to decrease of test temperature. Also, the strain fields of specimen surface using digital image correlation increase as temperature decreased from $50^{\circ}C$ to $-40^{\circ}C$, but it sharply decreases at $-60^{\circ}C$ because of brittle behavior.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.29-34
• /
• 2014

Particulate reinforced composite is composed of hard particles and polymer matrix. This material has been widely applied for engineering industry such as automobile, construction and aerospace. For the safe application, it is important to assess crack resistance behavior. Especially in aerospace industry, crack could cause significant problem when the material is used for solid rocket fuel. Therefore, it is inevitable to estimate the characteristics of the crack propagation. In this study, crack propagation tests were conducted using particulate reinforced composite under crosshead rate 2.54 mm/min in the range of temperature $-60^{\circ}C$ to $60^{\circ}C$. The strain contour of surface for specimen was generated using digital image correlation method.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.1112-1119
• /
• 1999

Digital watermarking is to embed imperceptible mark into image, video, audio and text data to prevent the illegal copy of multimedia data, arbitrary modification, and also illegal sales of the copes without agreement of copyright ownership. The DCT(discrete Cosine Transforms) transforms of original image is conducted in this research and these DCT coefficients are expanded by Fourier series expansion algorithm. In order to embed the imperceptible and robust watermark, the Fourier coefficients(lower frequency coefficients) can be calculated using sine and cosine function which have a complete orthogonal basis function, and the watermark is embedded into these coefficients, In the experiment, we can show robustness with respect to image distortion such as JPEG compression, bluring and adding uniform noise. The correlation coefficient are in the range from 0.5467 to 0.9507.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.209-212
• /
• 2001

오늘날, 디지털 워터마크에 대하여 기하학적 변환에 대한 강인성이 요구되고 있다. 본 논문에서는 회전, 이동 및 크기변화에 강인한 워터마킹 방법을 제안한다. 영상의 푸리에 변환 계수를 이용하여 이동에 대한 강인한 속성을 가지도록 하며, 입력 마스크의 상호 관계가 회전, 크기 변화에 강인하도록 워터마크 마스크를 생성한 후 영상에 삽입한다. 삽입된 워터마크의 검출은 영상의 주파수 영역의 radial projection 에 대한 워터마크 신호의 상관도를 이용하여 검출한다. 실험을 통하여 제안된 방법이 여러 가지 기하학적 변환에 강인함을 보여준다.

• Journal of Power System Engineering
• /
• v.14 no.5
• /
• pp.17-23
• /
• 2010

In recent, the capacity of a commercial wind power has reached the range of 6 MW, with large plants being built world-wide on land and offshore. The rotor blades and the nacelle are exposed to external loads. Wind power system concepts are reviewed, and loadings by wind and gravity as important factors for the mechanical performance of the materials are considered. So, the mechanical properties of fiber composite materials are discussed. Plain woven fabrics Carbon Fiber Reinforced Plastics (CFRP) are advanced materials which combine the characteristics of the light weight, high stiffness, strength and chemical stability. However, Plain woven CFRP composite have a lot of problems, especially delamination, compared with common materials. Therefore, the aim of this work is to estimate the mechanical properties using the tensile specimen and to evaluate strain using the CNF specimen on plain woven CFRP composites. For the strain, we tried to apply to plain woven CFRP using Digital Image Correlation (DIC) method and strain gauge. DIC method can evaluate a strain change so it can predict a location of fracture.