• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.905-913
• /
• 2006

In the impulse radio ultra-wideband communication systems, the residual timing offset exists when the acquisition and tracking of the timing synchronization is well done. And the offset affects the performance of the system dramatically. In order to compensate the offset, we present the digital phase-locked loop that uses the reference signal in the correlation detection receiver. First, we show the degradation of BER performance that is caused by the offset, and then compensation process of the timing tracker and performance improvement. In this paper, the timing detector in the tracker operates at the sampling period of frame level uses the correlation between received and reference signal. Also, we present the performance comparison by using the computer simulation results for different Gaussian monocycle pulses.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.3133-3138
• /
• 1997

The Digital Broadcasting Satallite System consists of the Transmitter station, the Resource and Subscriber Management System, and the Receiver Test Unit. The RSMS consists or several modules such as Resource Main Module, Resource User Interface Module, Transmitter Station Interface Module, Receiver Test Unit Interface Module, Subscriber sales Outlets Module and Monitor & Control Module. In this paper we suppose the new RRMC Algorithms that is to manage efficiently the Resource and subscriber information in the Direct Broadcasting Satellite system based on client-sever features and demonstrates the implementation method of monitoring and control the system in real time. Also we explain the communication procedure between resource and subscriber managment and other equipment.

• Journal of Broadcast Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1996

Digital DBS service using Korea Sat starts at Korea Telecom's Yong-in transmission site. Total 6 transmitting stations are needed. At each transmitting station, 4 TV programs are compressed and multiplexed using MPEG-2, modulated into IF, RF signals, then finally transmitted through antenna. At DBS transponder, received signal is down converted, amplified and re-transmitted to earth. At receiver, signal is received by 45cm dish antenna, then wanted program is selected, demultiplexed and decoded. Transmission performance of BER lOE-ll is implemented by using FEe coding and QPSK modulation. For pay TV management, conditional access system, smart card and modem are used.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.40-44
• /
• 2010

The timing error detector(TED) employed in the closed loop type timing synchronization scheme for an MQASK all digital receiver suffers from the selfnoise-induced timing jitter. To eliminate the timing jitter a prefilter can be added in front of the TED. The prefilter method, however, degrades the stability and timing acquisition performance due to the loop delay and increases the complexity of the synchronizer. This paper proposes a polyphase filter type resampler approach to optimize the performance and architecture of the synchronizer simultaneously. The proposed scheme uses two resamplers which performs matched filtering and matched prefiltering so that the loop delay is minimized with minimal hardware resources. Simulation results showed an excellent acquisition performance with reduced timing jitter.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.15-20
• /
• 2012

In this paper, we designed and analysed K-band front-end module for digital microwave communication system receiver which improvement of dynamic range. We also suggested method of minimum amplified input signal level used to minimize noise figure of low-noise amplifier for High dynamic range. The designed modules consist of active mixer with conversions gain and PL-DRO with high stability and quality factor. The designed modules performance is that has the characteristics of over 54dB conversion gain, 1.3dB noise figure.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.803-815
• /
• 2016

In this paper, we design a direct radio frequency (RF) sampling receiver for multiband GNSS signals and demonstrate its performance. The direct RF sampling is a technique that does not use an analog mixer, but samples the passband signal directly, and all receiver processes are done in digital domain, whereas the conventional intermediate frequency (IF) receiver samples the IF band signals. In contrast to the IF sampling receiver, the RF sampling receiver is less complex in hardware, reconfigurable, and simultaneously converts multiband signals to digital signals with an analog-to-digital (AD) converter. The reconfigurability and simultaneous reception are very important in military applications where rapid change to other system is needed when a system is jammed by an enemy. For simultaneous reception of multiband signals, the sampling frequency should be selected with caution by considering the carrier frequencies, bandwidths, desired intermediate frequencies, and guard bands. In this paper, we select a sampling frequency and design a direct RF sampling receiver to receive multiband global navigation satellite system (GNSS) signals such as GPS L1, GLONASS G1 and G2 signals. The receiver is implemented with a commercial AD converter and software. The receiver performance is demonstrated by receiving the real signals.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.446-449
• /
• 2007

기존의 아날로그 방송에서 디지털 방송으로의 전환이 가속화되고 있으며, 디지털 방송은 아날로그 방송과는 다르게 다양한 서비스를 사용자에게 제공 할 수 있다는 장점을 가지고 있다. 디지털 방송에서는 트랜스포트 스트림을 이용하여 비디오/오디오 이외에 데이터를 전달하여 방송과 관련된 정보나 어플리케이션을 다룰 수 있다. 트랜스포트 스트림을 방송환경에서 사용 할 경우 응답시간이나 중복되는 패킷들에 대해서 어떻게 고려하느냐에 따라서 시스템 전제에 성능을 영향을 줄 수 있다. 본 논문에서는 데이터 방송을 위하여 패킷 단위로 전송되어온 트랜스포트 스트림을 효과적으로 처리 및 분류하고 선택적으로 상위 계층으로 전달하는 패킷 매니저를 설계 및 구현하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06a
• /
• pp.37-42
• /
• 1998

외국에서 개발한 디지털 방송 모니터링 장비는 국내의 규격 및 방송 환경과 상이하여 정확한 오류검색이 불가한 상황이다. 따라서, 국내 방송환경에 적합한 디지털 위성방송의 송출 및 수신상태를 감시할 수 있는 계측 장비가 필요하다. 위성 본방송에 대비하고 위성방송의 안정적 운용을 위하여“디지털 위성방송 모니터링 시스템”을 국내 최초로 개발하였다. 시스템의 구성은 PC에 카드형 수신기를 내장하였으며, 응용 S/W로 다양한 모니터링이 가능하도록 설계하였다. 주요기능은 현재 방송중인 위성 중계기의 RF 레벨 및 채널상태, 영상 및 음성의 송출상태, Service Information의 송출상태를 동시에 검색한다. 그리고, 오류발생시 겨고 메시지를 발송하고 오류복구방안을 제시하며, 모니터링 결과를 저장한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.145-154
• /
• 2012

This paper proves that multi-port junction-based direct receivers (MPDRs) can regenerate I- and Q-channel signals accurately by using conventional I/Q mismatch compensation. This proof enables MPDRs to be integrated into existing RFIC based systems without additional digital signal processing. This paper analyzes the relationship between accuracy of I/Q regeneration parameters and degree of I/Q mismatch, and shows that the estimation results and the simulation results are almost the same.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.110-112
• /
• 2015

지상파 디지털멀티미디어방송(T-DMB)을 이용하여 국지적인 재난경보 방송을 실시하고 있지만 산간오지 등과 같은 전파 음영 지역에는 시설 투자의 한계로 서비스가 제한되고 있는 실정이다. 무선 마을 방송 시스템은 ISM 밴드 주파수를 사용하고 있으며 마을 방송용으로 주파수를 제한하여 간섭영향이 상대적으로 적은 장점을 갖는다. 본 논문에서는 T-DMB 재난 방송을 기존 무선 마을 방송 시스템의 장점을 이용하여 산간오지의 댁내까지 방송 가능한 시스템을 제안하였다. 재난 발생시 T-DMB 특수 수신기의 재난 방송 출력 신호를 무선 마을 방송 송신기와 복수의 댁내 무선 수신기를 통하여 방송 가능한 구조이며 T-DMB 수신기와 무선 방송 송신기간에는 접점 인터페이스를 통하여 정확한 시퀀스 제어가 필요하다. 무선 마을 방송 시스템은 UHF 대역의 ISM 밴드 무선 주파수를 이용하여 오지산간 지역의 부락에 적합한 특성을 갖고 있다. 장애물로 인한 장거리 전송의 한계는 무선 중계기를 이용하여 커버리지를 확장 가능하다. 따라서, 본 논문에서는 T-DMB 재난 방송을 재송신하는 수단으로 ISM 밴드와 연동할 경우 방송 음영지역 해소 및 재난 방송 수신율이 개선되어 국지적 재난에 대한 대국민 인명과 재산보호에 기여할 것으로 판단된다.