• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.207-213
• /
• 2006

This paper presents the design and implementation of a video processor for the device of need TV-OUT function. The designed video processor satisfies the standard conditions of ITU-R(International Telecommunication Union-Radiocommunication) BT.470. Also, in order to apply various digital device, we concentrate upon hardware complexity. ITU-R BT.470 can be classified as NTSC, PAL or SECAM. NTSC and PAL use QAM(Quardarature Amplitude Modulation) to transmit color difference signals and SECAM uses FM(Frequency Modulation). FM must have antic-cloche filter but filter recommended by ITU-R BT.470 is not easy to design due to sharpness of the frequency response. So this paper proposes that the special quality of anti-cloche filter is transformed easy to design and the modulation method is modified to be identical with the result required at standard. The processor can control power consumption by output mode to apply portable digital devices. The proposed processor is experimentally demonstrated with ALTERA FPGA APEX20KE EP20K1000EBC652-3 device and SAMSUNG LCD-TV.

• Information and Communications Magazine
• /
• v.13 no.7
• /
• pp.40-50
• /
• 1996

본고에서는 디지털 DBS 방송시스템 기술을 설명하는데 있어 먼저 국제적 추세를 논하고 나서 무궁화호 위성을 위한 디지털 위성방송 시스템에 관한 구조를 송신국, RSMS 및 수신기로 나누어 논한 뒤 디지털 DBS 방송시스템 기술에 대해서는 비디오 기술, 오디오 기술, 데이터 기술, 변조 및 채널 부호기술 및 링크 분석을 중심으로 설명하였으며 마지막으로 디지털 DBS 방송시스템 기술을 향상시키기 위한 방안에 대해서 논하였다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.452-455
• /
• 1999

일반적인 전동기부하는 저속에서 큰 토크를 필요로 하지 않으므로, 인버터로 전동기를 구동하고자 할 때는 낮은 평균전압이 필요하다. 그러나 전력전자 소자의 제한된 스위칭 주파수, 단락 방지를 위한 데드타임 그리고 스위치나 다이오드 도통전압 등으로 인하여, 전류제어 루프 내에는 비선형성이 존재한다. 이러한 비선형성은 디지털 방식의 PWM에서 저전압을 합성할 때 현저하게 나타나는데 결과적으로 교류전동기의 저속운전을 어렵게 한다. 본 논문에서는 기존 디지털방식 PWM의 비선형성을 모델링 하고 그 비선형성을 감소시킬 수 있는 공간벡터 변조기법을 제시하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.36-45
• /
• 2008

LYNX ESM system operates digital receiver for analyzing radar of intrapulse modulation signal. This paper contains DC offset compensation method of IQ channels, imbalancing comensation method of amplitude and phase, precisional PW measurement using adaptive threshold set, analyzing algorithm of intrapulse modulation signals. Its effectiveness was proven by technical and operational test.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.807-812
• /
• 2022

Recently, as the number of voice recording files submitted as court evidence increases, the number of cases claiming forgery is also increasing. If the audio recording file structure and metadata, which are objective grounds, are completely forged, it is actually impossible to detect forgery of the sophisticated audio recording file. It is extremely rare for the court to reject the file structure and metadata analysis performed with the forged audio recording file. The purpose of this study is to prove that forgery of voice recording file structure and metadata is easily possible. To this end, in this study, it was introduced that forgery detection is impossible when the 'mixed paste' function, which enables sophisticated editing based on the typification of the editing method of voice recording files, is applied. Moreover, it has been proven through experiments that forgery of file structure and metadata is possible. Therefore, a stricter standard for judging the admissibility of evidence is required when the audio recording file is adopted as digital evidence. This study will not only contribute to the standard of integrity in the adoption of digital evidence by judges, but will also contribute to the method of constructing a dataset for artificial intelligence in detecting forgery of recorded files that is expected to be developed in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.103-109
• /
• 1998

디지털신호의 변조에는 기본적으로 진폭 편이 변조(ASK: Amplitude-Shift Keying), 주파수 편이 변조(FSK: Frequency-Shift Keying), 위상 편이 변조(PSK: Phase-Shift Keying) 등의 세 가지 방법이 있다. 본 논문에서는 표본클록 합성계수 방식에 관한 이론을 고찰하고, 클록초기치 누적방식의 DDFS를 이용하여 위에서 언급한 변조방법을 실현할 수 있는 주파수 도약 대역 확산 통신에 적합한 변조기를 구현하였다. 또한, 합성된 출력주파수 의 정현파형에 대한 스펙트럼 분석과 PN(Pseudo Noise) 부호를 사용한 순시적인 주파수 도 약 상태, 위상제어의 가능성 등을 확인한 결과 실험으로부터 다음과 같은 결과를 얻었다. 첫 째, 합성된 출력주파수는 주파수 Index에 따라 기준주파수에 정확히 정수배가 되며, 둘째, 합성된 정현파형의 스펙트럼으로 기본파와 여러 고조파의 크기를 비교하여 본 결과 50[dB] 이상의 차이가 남으로서 고조파 성분들이 상당히 감소되었음을 확인하였고, 셋째, PN 코드 를 사용하여 순시적인 주파수 도약 상태를 확인하여 본 결과 스위칭 시간이 빠르기 때문에 주파수 도약 특성이 뛰어남을 알 수 있었으며 또한, 누산기의 set/reset 상태를 변화시킴에 따라 위상이 제어됨을 입증하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2009-2019
• /
• 2013

In this paper, we propose an automatic modulation recognition algorithm based on cyclic moment and new modified cumulant for analog and digital modulation signals. It is noteworthy that each modulated signal has different cycle frequency characteristics according to its order of cyclic moment. By means of this characteristics as classification features, various modulated signals can be efficiently classified. Also, to identify modulated signals having the same cycle frequency characteristics, we take advantage of the additional classification factors such as variations of envelope and phase as well as modified cumulant. The proposed algorithm was evaluated by considering the number of symbols, SNR, and frequency offset. In the simulation condition where the number of gathered symbols was about 819, and SNR and frequency offset were above 10dB and below 25%, respectively, the average accuracy of the proposed algorithm was more than 95%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1C
• /
• pp.73-81
• /
• 2005

We propose an automatic modulation recognition scheme which extracts pre-defined key features from the received signal and then applies equal gain combining method to determine the used modulation. Moreover, we compare and analyze the performance of the proposed algorithm with that of decision-theoretic algorithm. Our scheme extracts five pre-defined key features from each data segment, a data unit for the key feature extraction, which are then averaged over all the segments to recognize the modulation according to the decision procedure. We check the performance of the proposed algorithm through computer simulations for analog modulations such as AM, FM, SSB and for digital modulations such as FSK2, FSK4, PSK2, and PSK4, by measuring recognition success rate varying SNR and data collection time. The result shows that the performance of the proposed scheme is comparable to that of the decision-theoretic algorithm with less complexity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.669-672
• /
• 2008

In this paper, we propose a constant-amplitude multi-rode trans-bi-orthogonal modulation scheme by introducing a simple constant-amplitude coding scheme with redundant bits and trans-code, which if a modified orthogonal modulation scheme. Generally speaking, the orthogonal modulation scheme is not appropriate for the high speed data transmission applications because of bad bandwidth efficiency. Therefore, we use the multi-rode trans-bi-orthogonal modulation with trans-code for high bandwidth efficiency. Moreover, redundant bits are used for constant-amplitude-coding. Finally, we compare the performance of the proposed scheme with the orthogonal modulation and constant-amplitude multi-code trans-orthogonal modulation by using the computer simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.655-658
• /
• 2008

In this paper, we explain the combined scheme of multi-code modulation and trans-orthogonal modulation. The name of the explained scheme is the multi-code trans-orthogonal modulation. Additionally, we propose a multi-code trans-biorthogonal modulation scheme, which is a little more improved multi-code trans-orthogonal modulation. We show the performance of the proposed schemes and compare the performance of the proposed schemes with the orthogonal modulation by using the computer simulation. According to the computer simulations, we can know that the bandwidth efficiency of the proposed schemes is better than that of the conventional orthogonal modulation. The proposed schemes can be used in physical layer of digital wireless telecommunication system to provide high speed data rate.