• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.102-109
• /
• 1999

Reverse engineering is a technique that helps designers to quickly generate computer interpretable data from existing physical objects. It can be used for generating CAD data from a mechanical part of high precision, or generating computer animation characters from physical mock-ups. We developed a low precision reverse engineering system that is composed of surface/solid generation software and a contact type commercial 3D digitizer. A unique point sampling procedure has been devised to easily form solid topology from the sampled data. It was also shown that STL data for rapid prototyping was successfully generated from the solid.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.239-240
• /
• 2014

본 논문에서는 싱글 보드컴퓨터(SBC)에서 마우스와 디지타이저를 이용한 입력장치설계에 대하여 연구하고자 한다. 산업용 제어현장에서 사용되는 SBC는 아날로그 방식의 입력장치를 주로 사용하지만, 현재의 컴퓨터 주변장치를 직접 사용할 수 없는 경우가 대부분이다. 본 논문에서는 PC에서 사용하는 다양한 주변장치를 SBC에서 사용할 수 있도록 신호를 변환하는 입력장치를 설계 제작하였다. PC 주변장치는 MCU를 이용하여 신호를 해석한 후, SBC 입력장치 신호형식으로 변환하여 제공하였다. 설계 제작된 입력장치는 마우스 디지타이져, 터치스크린 등 다양한 장치들을 SBC에서 사용이 가능함을 보였다.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.1
• /
• pp.1-13
• /
• 2001

Conventionally the subjective assessment for measuring the human sensibility is always performed after an experiment or a stimulus is terminated. This aftermath method can not. exactly, reflect the human sensibility which is produced at the moment of the presentation of the stimulus. In the present study, a new real-time subjective assessment system is developed. The system is composed of two parts: the sensibility input part and the sensibility evaluation part. The sensibility input part gets the values, which are recorded on the input board using pen-mouse, from the evaluation of each subject on his/her own subjective sensibility for the stimulus. The sensibility evaluation part displays the level of the pleasantness and arousal on one and two dimension in real time. An experiment on the design of the input board that any subject can easily and exactly evaluates one's own sensibility is also included in this study. The system can be used for evaluating the human subjective sensibility in real time, and, also, can be applied to other subjective assessment tests that require real time evaluation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.291-297
• /
• 1998

In order to accomplish the digital map production I/O devices should be used which are used for data input procedure to convert original paper map(hardcopy) data into computer compatible digital map data, and for the mapsheet output procedure of worked out data. For the input device, digitizer and scanner are most frequently used. Digitizer has possibility of direct production of digital data, and are mainly used for input procedure of partly plotted source map. In contrary, scanner is rather easy to operate the instrument, so that is widely used for the input procedure of original sheet map. In this study, to extract the input device characteristics, some kinds of digitizers and scanners were cheesed and used for the positional error analysis through the operational method and types of instruments. Also for the output device characteristics, some kinds of plotter and materials are used and compared to analyze the positional error through the instrumental types and output sheet materials.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.547-550
• /
• 2006

휴대 인터넷은 이동 중에도 무선으로 고속의 데이터 송수신이 가능한 통신 서비스로서 우리나라에서는 WiBro(Wireless Broadband)라고 명명되어 2006년 6월 상용 서비스를 시작하였다. 한국 정보 통신 기술협회(TTA)와 IEEE802.16e 표준에서 제시된 휴대인터넷 서비스는 기본적으로 기지국과 단말을 기반으로 한 CDMA통신 시스템과 유사한 셀룰러 망 구조를 가지고 있다. 와이브로에서 모든 RAS(Radio Access Station)는 매 5msec마다 프레임을 전송하고, 이 프레임의 앞 단에는 Preamble이 위치하고 있어 기지국과 단말의 Synchronization을 가능케 해준다. 각 RAS는 서로 다른 Preamble을 사용하므로 단말은 Preamble detection을 통해 기지국을 구분할 수 있다. 본 논문에서는 휴대인터넷을 이용한 무선측위의 해상도 및 가청성을 현장실험을 통하여 분석한다. 현재 상용화 되어 사용중인Wibro 신호를 기저대역으로 낮추고 이 신호를 디지타이저를 사용하여 20MHz의 샘플링 주파수로 수집한다. 5msec 주기의 Wibro프레임 중에서 Preamble을 Correlation detection 기법을 사용하여 기지국과 단말 사이의 relative delay를 측정하여 기지국들과 단말 사이의 거리의 차를 구한다. 거리측정치를 이용하여 Wibro 망에서의 무선측위 추정치를 구하고 해상도와 정확도 및 가청성 등의 Wibro의 측위성능을 분석한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.562-567
• /
• 2000

Many pressure vessels for power and industrial plant are fabricated from low alloy carbon steels. The inner sides of pressure vessels are commonly weld-cladded with austenitic stainless steels to minimize problems of corrosive attack. Disbonding cracks are often detected at the transition region of welding interlayer, which is serious problem to reliability of pressure vessels. We have developed C-scan system to high speed inspection of overlay weld using DSP(digital signal processor). This system consists of signal processing parts (oscilloscope, pulser/receiver, digitizer, DSP), scanner, program and position controller. The developed system has been applied to a practical ultrasonic testing in overlay weld, and demonstrated high speed with precision

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.744-751
• /
• 2004

This paper presents the implementation of the low cost and high speed RF ATE(Automatic Test Equipment) system, which can be a reasonable solution for reducing the test cost of RF devices. This paper suggests high speed and precise measurement capabilities which are realized by the 16 independent RF ports with high speed switching time and high accuracy digitizer using the industry standard Versus module eXtensions for Instrument(VXI) General Purpose Interface Bus(GPIB) interfaces. Also, the system has the capabilities of quad-site test which can dramatically increase the device throughput. This paper concludes with the demonstration of the implemented ATE system through the setup of RF Power Amplifier Module(PAM), which is under the most competitive market situation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.190-195
• /
• 2003

For many coastal problems, such as wave transformation, tidal circulation, sediment transports and diffusion phenomena, we resort to numerical techniques. The representative numerical techniques are the method of finite differences and finite elements. The approximate algebraic equations, referred to as finite difference equations(FDEs), are subsequently solved at discrete grid points within the domain of interests. Therefore, a set of grid points within the domain, as well as the boundaries of the domain, must be specified. The generation of grids for FDEs, with uniform spacing, is very simple compared to that of finite elements. However, within a very complex domain, there are few grid generation tools we can use conveniently. Unfortunately, most of the commercial grid generation programs are developed only for finite element method. In this paper, grid generation method using digitizer, with uniform rectangular spacing, are introduced in detail. Didger and Surfer programs by Golden Software are necessary to produce comparatively accurate and simple depth data.

• Journal of KIISE:Software and Applications
• /
• v.29 no.11
• /
• pp.803-808
• /
• 2002

This paper describes automatic methods for detection of kidney and kidney tumor on abdominal CT scans. The abdominal CT images were digitalized using a film digitizer and a gray-level threshold method was used to segment the kidney. Based on texture analysis results, which were perform on sample images of kidney tumors, SEED region of kidney tumor was selected as result of homogeneity test. The average and standard deviation, which are representative statistical moments, were used to as an acceptance criteria for homogeneous test. Region growing method was used to segment the kidney tumor from the center pixel of selected SEED region using a gray-level value as an acceptance criteria for homogeneity test. These method were applied to 113 images of 9 cases, which were scanned by GE Hispeed Advantage CT scanner and digitalized by Lumisvs LS-40 film digitizer. The sensitivity was 85% and there was no false-positive results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.602-607
• /
• 2002

In this paper, we proposed an approach to efficiently compress and transmit multiresoltion 3D lariat models for multimedia and very low bit rate applications. A personal facial model is obtained by a 3D laser digitizer, and further re-quantized at several resolutions according to different scope of applications, such as animation, video game, and video conference. By deforming 2D templates to match and re-quantize a 3D digitized facial model, we obtain its compressed model. In the present study, we create hierarchical 2D lariat wireframe templates are adapted according to facial feature points and the proposed piecewise chainlet affined transformation(PACT) method. The 3D digitized model after requantization are reduced significantly without perceptual loss. Moreover the proposed multiresoulation lariat models possessed of hierarchial data structure are apt to be progressively transmitted and displayed across internet.