• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.319-327
• /
• 1988

A new measuring method is proposed, which measures the atomization characteristics of a non-evaporating, axi-symmetric diesel spray by means of an image analysis of high speed shadow photographs. The instantaneous sauter mean diameter and the fuel concentration in the spray are calculated of the splay axis and in the radial direction and the data of the fuel injection rate, using an onion peeling model. Some examples of application of this method to eight different diesel sprays are demonstrated, and the results are compared to predicted results by the conventional immersion method and a quasi-steady one dimensional spray model.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.735-741
• /
• 1986

An experimental study on the effects of exhaust pipe curvature on the performance of a diesel engine is presented. The experiments were carried out on a 4-cycle, 216 c.c diesel engine and two types of pipe curvature, circular arc and rectangle, were tested. The shaft output, shaft torque and specific fuel consumption were obtained by inserting bent pipes of different dimensions into the exhaust pipe at various engine operation conditions. It was found that the engine performance was decreased by the circular arc bent pipe and the effects were dominated by its arc angle. The decrease of engine performance was minimized by the arc angle of 180.deg.. By the rectangle pipes the performance was more decreased and the effects were little influenced by its dimensions.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.18-28
• /
• 1984

디이젤 엔진은 피스톤이 실린더 내를 왕복 운동하면서 압축행정에서 연료의 연소에 의해 발생된 고열을 받아 고온에서 작동되기 때문에 피스톤 헤드에서 받은 열은 속히 아래부분으로 전달시 키고 동시에 실린더 벽으로 전달되게 하여야 한다. 여기서 열이 문제가 되는 요소를 생각해 보면, (1) 고압 : 연소 최고폭발압력이 높기 때문에 압력상승률도 커져 격렬한 연소상태가 된다. (2) 고온 : 격심한 가스 유동과 실린더 직경이 크기 때문에 피스톤 헤드부의 온도가 높아진다. (3) 연소생성물 중에 엔진 및 윤활유에 악 영향을 주는 성분이 많다. (4) 경량, 저가격 구조 때문에 열적 및 역학적 변형이 일어나기 쉽다. (5) 사용조건이 가혹해 연료가 이상 현상을 가져온다. 위의 요소들을 가지고 온도의 분포, 열의 전달과정, 피스톤 냉각 등에 대해서 알아본다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.405-406
• /
• 2002

서울시 대기오염물질의 배출량 중 맡은 부분이 자동차 배출물질에 의한 것임은 잘 알려진 사실이다. 특히 이 중 디이젤 연료를 사용하는 자동차 배출량의 기여도가 가장 큰 것으로 알려져 있다 따라서 환경부에서는 디이젤의 대체 연료인 천연 가스를 시내 버스에 적용하여 점차적인 보급을 계획 중에 있다. 청정연료로 알려진 천연가스는 특히 입자상 물질이나 오존 등의 감소에 큰 역할을 하는 것으로 알려져 있다. (중략)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.72-79
• /
• 1987

In this paper, an investigation of the property of blended fuel oil, combustion characteristics and engine performance was made, in case blended fuel oil(light oil+heavy oil) was used in a home-made precombustion diesel engine for small-sized fishing boat. The results may be summarized as follows: 1. The specific gravity was linearly increased in accordance with the increase in heavy oil ratio in blended fuel oil, and the relationship between viscosity and temperature was coincided with the formula of Walther-ASTM, and the CCAI, the ignition quality index, was increased nearly as a straight line of the gradient 1.0. 2. The ignition delay was slightly increased below 810 of CCAI(blending ratio to be 60% of heavy oil), but remarkably increased above 810 of CCAI. Therefore, it was considered that the practicable value of CCAI, ignition quality of blended fuel oil, was more than 810. 3. The maximum combustion pressure was increased until blending ratio of heavy oil was raised up to 40%. On the contrary, it came to be decreased at that ratio, with smoke emissions remarkably increasing above 60%. Therefore, it was found in this experiment that the best practicable limit of heavy oil blending ratio was around 50% for saving fuel costs with least smoke emissions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.26-26
• /
• 1987

In this paper, an investigation of the property of blended fuel oil, combustion characteristics and engine performance was made, in case blended fuel oil(light oil+heavy oil) was used in a home-made precombustion diesel engine for small-sized fishing boat. The results may be summarized as follows: 1. The specific gravity was linearly increased in accordance with the increase in heavy oil ratio in blended fuel oil, and the relationship between viscosity and temperature was coincided with the formula of Walther-ASTM, and the CCAI, the ignition quality index, was increased nearly as a straight line of the gradient 1.0. 2. The ignition delay was slightly increased below 810 of CCAI(blending ratio to be 60% of heavy oil), but remarkably increased above 810 of CCAI. Therefore, it was considered that the practicable value of CCAI, ignition quality of blended fuel oil, was more than 810. 3. The maximum combustion pressure was increased until blending ratio of heavy oil was raised up to 40%. On the contrary, it came to be decreased at that ratio, with smoke emissions remarkably increasing above 60%. Therefore, it was found in this experiment that the best practicable limit of heavy oil blending ratio was around 50% for saving fuel costs with least smoke emissions.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.45-53
• /
• 1998

The purpose of this study was to evaluate effects of initial concentration and nutrients in treatment of petroleum hydrocarbon contaminated soils. The reactor used in this study was slurry-phase bioreactor of in-vessel type. Performance results on treatment of diesel fuel contaminated soils and micorbial growth were generated at the bench-scale level. The fate of TPH(Total Petroleum Hydrocarbon) and the microbial growth were evaluated in combination with biodegradation rate. Effect of initial loading levels of 50,000 and 100,000mg TPH/kg soil was studied. Performance results with two reactors were showed at the total TPH removal rate of 90.5% and 90.8%, respectively. However, the reactor with the initial concentration of 50,000mg TPH/kg soil showed higher biological TPH removal efficiency except for removal by volatilization than the other Although the different amount of nutrients was applied in two reactors, there was no remarkable difference in microbial growth rate. However, considerable factor in this results was that applied different initial concentration to two reactors. Although initial concentration was two times higher than it applied to the reactor without addition of nutrients, in total and biological TPH removal rate the reactor with addition of nutrients showed a higher than the other.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.963-970
• /
• 1987

It has been a long time that black smoke emitted from buses and trucks powered with diesel engines, especially city-buses, came to be a serious air pollution problems in large cities as Seoul and Pusan. Therefore, proper means to reduce black smoke from diesel engines have to be considered as soon as possible, because it will take quite a long time to replace major passenger transportation system in cites from city-buses to subway. This paper, as a study on the reduction of diesel black smoke, showes how the black smoke of diesel engines can be reduced at various loads and engine speed by supplying small amount of gaseous fuel as LPG into the intake manifold. Thermal efficiency has been also considered for users, and confirmed through the engine test.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.2
• /
• pp.45-54
• /
• 1985

Recently, the problem of exhaust gas pollution is increasingly being aggravated by the active use of the Diesel engine. For the fuel-injection system which affects the composition of exhaust gas from the Bosch type single-hole nozzle in the Diesel engine, a mathematical model was set up to study pressure variations in the high pressure pipe, the injection rate, and the needle lift. The fundamental equations of the mathematical model have been solved by the Newton Raphson Method applying the Finite Diffrence Method. The effective stroke of the injection pump plunger due to a change in engine rpm was calculated by the measurement of Control Rack, Pinion, and Plunger sizes and by the use of Characteristic Curve of Governor. The computed results for the pressure variations in the high pressure pipe and needle lift at 800 rpm and 1000 rpm are in good agreement with experimental ones in general. By a developed program, the effects of other various parameters will by calculated for the performance of the fuel-injection system.

• Journal of the KSME
• /
• v.25 no.3
• /
• pp.176-189
• /
• 1985

터어보 과급 엔진은 자연흡입식 엔진에 비해 많은 장점을 갖고 있고, 또한 세계적인 터어보 과급 엔진의 증가 추세를 미루어 볼 때 국내에서도 가까운 장래에 터어보 과급 엔진의 폭넓은 적용의 시기가 도래할 것으로 전망된다. 특히 최근 국내 자동차 산업의 기술발전 추세 및 운 수업체의 전반적인 수준 향상의 현실을 고려하면 우리나라에서도 터어보 과급 엔진을 도입 활 용하는데 필요한 모든 기술적 여건은 충분히 무르익었다고 관측된다. 이러한 추세를 감안한다면, 국내의 차량 제조업체, 엔진 제조업체 및 연료분사 핌프와 터어보 과급기 등의 자동차 부품 제 조업체들은 해당 사무분야에서 엔진의 터어보 과급화와 관련되는 기술 및 사업체제를 단계적으로 구축하여 감이 필요하다고 란단되며, 아울러 운수업체에서는 터어보 과급 엔진의 적절한 정비 방법을 도입하고 터어보 과급 엔진 장작 차량의 올바른 운전 지침을 도입 정착시키는 등 터어보 과급 엔진 시대의 도래에 대한 절절한 준비를 하여 나감이 필요할 것으로 본다.