• The Science & Technology
• /
• v.35 no.5 s.396
• /
• pp.24-25
• /
• 2002

1998년 설립된 벤처기업 (주)디엠디스플레이는 리모콘을 누르면 테라스의 유리창이 TV스크린으로 바뀌는 스마트 유리를 순수 국내기술로 개발하여 상용화해 화제를 모으고 있다. 이미 양산체제로 들어간 이 회사는 2001년 산업자원부로부터 '세계 일류상품' 생산기업으로 지정받았다.

• Laser Solutions
• /
• v.18 no.3
• /
• pp.9-13
• /
• 2015

The development of a reliable, high-power source of mind-IR laser light gives process develop important tool with unique characteristics that will significantly impact a diverse range of applications.

• Electronics and Telecommunications Trends
• /
• v.23 no.5
• /
• pp.153-163
• /
• 2008

플렉시블 디스플레이는 종이처럼 얇고 유연한 기판을 통해 손상없이 휘거나, 구부리거나, 말 수 있는 차세대 디스플레이다. 유리 대신 플라스틱 소재.필름 등을 기판으로 사용하는데, 롤 방식의 대량 인쇄기술의 상용화로 거대한 시장을 형성할 것으로 기대되는 미래 유망산업이다. 본 고에서는 시장전망 및 국내외 개발동향을 중심으로 살펴 보고 정책적 시사점을 도출하고자 한다.

• 기계와재료
• /
• v.21 no.2
• /
• pp.110-118
• /
• 2009

최근 유력한 차세대 광원으로 떠오르고 있는 발광 다이오드(LED, light emitting diode)는 화합물 반도체의 특성을 이용해 전기를 자외선, 가시광선, 적외선 등으로 전환시키는 반도체 소자로 에너지 효율이 매우 높고, 수명이 길어 교체 비용이 적으며, 진동이나 충격에도 강하고, 수은 등 유독물질의 사용이 불필요하기 때문에 에너지 절약, 환경보호, 비용절감 차원에서 매우 유리하다. 현재 LED 분야에 있어 주로 연구개발이 진행되고 있는 분야는 조명용 백색 LED 분야 및 디스플레이 소자 분야이다. LED를 이용한 백색 조명 및 디스플레이 기기의 개발을 위해서는 그 응용 분야에 맞는 효율이 우수한 형광체의 개발이 필수적이다. 본고에서는 현재 조명용 백색 LED 및 디스플레이 분야에 응용되는 형광체의 개발 현황을 위해 주로 연구동향을 분석하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.155-155
• /
• 2001

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.101-109
• /
• 2016

The purpose of this research was to develop a flat panel display device's glass etchant which can replace hydrofluoric acid. The glass etchant was composed of 18~19% wt% of ammonium hydrogen fluoride, 24~25 wt% of sulfuric acid, 45~46 wt% of water, 4~5 wt% of sulfate and 7~8 wt% of fluoro-silicate. By replenishing the etchant which has the amount of 5% of initial solution's mass, it was possible to reuse the etchant continuously. The developed etchant showed $5{\mu}m/min$ of etching rate at $30^{\circ}C$. The reusable etchant, with replenishing 5% of initial etchant mass showed the stable etching rate, which has the deviation of less than $0.1{\mu}m/min$ etching rate. The glass surface of flat panel display device created from our etching process was in good condition with any defects such as pin hole and dimple.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.6
• /
• pp.251-257
• /
• 2020

In order to quickly and clearly recognize characters or images through display glass, glare of the glass must be suppressed. In this study, we tried to reduce glare by analyzing changes in glass surface shape and optical properties through etching process. The etching process was performed as a function of concentrations of the etching solutions, BOE and HF. During the etching process, a compound containing F ion was generated on the surface of the glass, forming an irregular pattern in the form of a projection, and thus various optical properties of the glass were changed; reflectance of 2.5~4.6 %, haze of 4.5~6.6 %, transmittance of 77~92 %, and gloss of 82~107 GU. As a result, optimum etching condition was obtained to minimize the loss of other optical properties while suppressing glare of the glass.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.195-195
• /
• 2003

PDP, FED 등의 디스플레이와 각종 IC 칩부품에 적용 가능한 저융점 유리 프릿 중에서 환경규제가 이루어지고 있는 납성분이 포함되어 있지 않은, Bi계 유리 프릿의 열적 거동 연구를 행하였다. 열처리 온도에 따른 열거동에 따라 프릿의 소성온도 및 미세구조가 결정되므로, 열처리 온도에 따른 유리 프릿의 젖음각을 측정하였고, DTA와 TMA를 통해 유리전이온도, 연화점, 열팽창계수 변화 경향성을 관찰하였다. 본 연구에서 제조된 유리는 조성에 따라 전이온도가 390-50$0^{\circ}C$, 연화점이 400-55$0^{\circ}C$, 열팽창계수가 65-120$\times$10-7/$^{\circ}C$ 범위를 나타내었으며, 고온현미경 측정 결과 Pb-계 유리와 비교시 유사한 열거동을 나타내었다.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1121-1126
• /
• 1998

For vacuum seated panel, stresses and displacements in the glass plate were calculated. The geometric variables for our experiment were the thickness of glass plate, the size of panel and the width of sealing line. The fracture behaviors and displacements of its under the vacuum were measured. From the measurement of strains and fracture, it was considered that the maximum stress acted at the middle of the sides of the panel. The stresses and displacement distribution of manufactured panels were greatly dependent on the width of the sealing line in the panel. The measured values are more similar to the values which were calculated from the condition of built-in edge as the width of the sealing line is larger. The measured displacement of the panel, made of 3mm thick glass plate, with size of $80\Times120\textrm{mm}^2$ and 20mm sealing line was $57\mu\textrm{m}$. This value is similar to calculated value, $54\mu\textrm{m}$, from built- in edge condition in the finite element method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.50-54
• /
• 1999

Plasma display panel is a potential candidate for HDTV, due to the fact that the screen size can easily be increased by a thick film technology. In this study, transparent dielectric materials which satisfied the requirements of dielectrics for PDP was developed using lead alumina borosilicate glasses. The Paste which had thixotropic behavior suitable for screen printing was made of this glass composition. the paste became more thixotropic as the particle size decreased. After firing, the cross sectional area of the thick film was analyzed by SEM. The voids in the thick film were removed using bimodal particle system. The dielectric thick film showed good adhesion characteristics.