• Journal of Broadcast Engineering
• /
• v.21 no.1
• /
• pp.43-50
• /
• 2016

In this paper, we present a distortion correction for wearable Augmented Reality (AR) on mobile phones. Head Mounted Display (HMD) using mobile phones, such as Samsung Gear VR or Google's cardboard, introduces lens distortion of the rendered image to user. Especially, in case of AR the distortion is more complicated due to the duplicated optical systems from mobile phone's camera and HMD's lens. Furthermore, such distortions generate mismatches of the visual cognition or perception of the user. In a natural way, we can assume that transparent wearable displays are the ultimate visual system which generates the least misperception. Therefore, the image from the mobile phone must be corrected to cancel this distortion to make transparent-like AR display with mobile phone based HMD. We developed a transparent-like display in the mobile wearable AR environment focusing on two issues: pincushion distortion and field-of view. We implemented our technique and evaluated their performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.940-947
• /
• 2015

This paper presents the region of interest pattern image extraction method on a display printed matrix pattern. Proposed method can not use conventional method such as laser, ultrasonic waves and touch sensor. It searches feature point and rotation angle using luminance and pattern reliable feature points of input image, and then it extracts region of interest. In order to extract region of interest, we simulate proposed method using pattern image written various angles on display panel. The proposed method makes progress using the OpenCV and the window program, and was designed using Verilog-HDL and was verified through the FPGA Board(xc6vlx760) of Xilinx.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.86-89
• /
• 2018

This paper introduces a ZigBee network-based four-lane lap time measurement system that can be set up for short-distance races. The instructions "Ready-Set-Go" can be announced at the entry point node when the start button is pushed, and foot switches installed at the exit point node can be stepped on by the runner for lap time measurement of the race. The start and exit point nodes are connected to a ZigBee network to communicate time synchronization packets. The exit point node maintains synchronized local time within 10 ms at most. The system does not need expensive measurement equipment and provides lap time recording in a more convenient manner than conventional lap time measurement methods.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.317-323
• /
• 2018

Although various kinds of VR services are being carried out in the tourism field, The virtual reality experiences are still costly, since they could be realized in a limited space with some kinds of expensive equipment such as HMD. In this study, we propose a mobile virtual reality tourism experience using an easy and simple Google card board and user's smartphone because most tourist sites are outdoors and most of users like enjoying sightseeing and experience at the same time. For this purpose, we constructed a system that provides tourist information in real time employing both the IoT and VR techniques. Especially we develpoed a tourism contents for the UNESCO World Heritage Communities of Baekje Historical Site and Songsanri Tumulus. In addition, we virtually restored the royal palace in Gongju and confirmed the historical experience by VR flatform could be popular with people.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.2
• /
• pp.13-19
• /
• 2012

The techniques of 3d image processing have broadly used in the areas including movies, games, performances, exhibitions. In addition, increasing demands for practical uses have gradually extended to the areas of architecture, medicine, nuclear power plant. However, dominant techniques for 3d image processing seem to depend on multi-camera in which two stereo images are merged into one image. Also the pipeline has limitations to provide real-time 3d viewer in ubiquitous computing. It is not able to be applicable onto most general screens as well. In addition, the techniques can be utilized for the real-time 3d game play without a particular monitor or convertor. Hence, the research presented here is to aim at developing an efficient real-time 3d viewer using only mono camera which do not need post processing for editing as well.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.15-22
• /
• 1998

The goal of this paper is to propose analyzing and evaluating method of power parameters for motor drive system with various experimental graphic screens and numerical results and to develop the proposed system. A developed system is made up 586-PC and DSP board, motor drive system, power parameters analyzing and evaluating software for windows. Power parameters are analyzed using correlation signal processing techniques based on the correlation between voltage and current waveforms. Analysis results are visualized by 3-D current coordinates, and it is compared and evaluated with conventional time/ frequency domain. To verify the validity of the proposed system, capacitor run type single phase induction motor and thyristor speed controller is used for analyzing. Power and harmonic parameters of motor drive system is analyzed and verified, with varying fire angle of thyristor speed controller, and the proposed approach is to confirm validity.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.85-90
• /
• 2019

This paper is a study on IoT based map inside the building and fire perception system using microprocessor and LABVIEW program. The smart control system implemented in this paper is designed to identify the location of fire by using microprocessor, flame detection sensor, carbon monoxide sensor and temperature sensor, and to guide the optimal travel route through Zigbee communication. And the proposed system uses QR code to interoperate with smartphone. The coordinator control verified that the sensor value of the smart control system installed through the LABVIEW software was confirmed. The IoT based control system studied in this paper was implemented with Arduino mega board and LABVIEW software, and the operation status was confirmed by display device and coordination.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.147-151
• /
• 2014

With the advent of tiny and inexpensive computer systems like Raspberry Pi, it has become possible to construct an experimental environment of MANETs (Mobile Ad hoc Networks) at a relatively low cost. In this paper, we implement a node of MANETs with a Raspberry Pi equipped with two 802.11 wireless LAN cards and dynamic routing software running on it. In an outdoor MANETs environment with moving mobile nodes automatically rebuilding broken routes, we conducted a real-time video streaming experiment over the MANET. The video stream is transmitted from a node with a video camera installed on it to another node through the route established dynamically. Each node is equipped with a display device, with which the current status of the node can be checked out. We also implemented software that automatically collects data stored in each node and analyzes the performance of the MANETs. Through this experiment, we could evaluate the performance of realistic video streaming service in a MANETs environment.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.1169-1172
• /
• 2011

본 연구는 고가의 인프라 구축이라는 제약 때문에 현재까지 기초적인 수준에 머물러있는 홈 네트워크의 문제점을 극복하고자 제안된 스마트폰 중심의 개인환경서비스(PES : Personal Environment Service)를 연구하였다. 개인환경서비스는 스마트폰과 무선랜, 블루투스 등의 모듈이 탑재된 가전기기와 근거리 무선통신으로 사용자의 선호도를 저장하고 있는 프로파일을 교환하여 가전기기를 자동으로 설정해 주며 프로파일은 서비스 서버에도 전송되어 지속적으로 갱신, 사용자에게 편리한 생활을 제공해 준다. 본 연구는 이러한 스마트폰 중심의 개인환경서비스의 데모 시스템 구조 및 시연 시스템을 구축하였다. 데모시스템의 스마트폰 플랫폼은 구글 사의 안드로이드 2.2 (Froyo) 버전이며, 지능형 가전기기와는 블루투스 통신을 통해 사용자와 서비스 프로파일을 교환한다. 가전기기는 PC, 난방기기, 가스렌지, TV, 라디오 총 5가지를 구현하였는데 실제 가전기기를 구현할 수 없는 한계로 인해 PC를 제외한 가전기기는 블루투스 임베디드 보드에 LCD 디스플레이를 설치한 모의(pseudo) 가전기기로 대체하였다. 스마트폰에 저장되어 있는 사용자 프로파일은 각각의 가전기기별 선호도를 환경설정을 통해 설정할 수 있게 하였고, 선호도를 설정하면 가전기기는 블루투스 통신으로 스마트폰의 사용자 프로파일을 전송받아 자동 설정해 준다. 서비스 서버는 스마트폰과 가전기기의 모든 로그를 전송받아 패턴분석 과정을 거쳐 사용자의 프로파일을 자동으로 설정해주어서 사용자는 개인에게 최적화된 생활환경을 제공받게 된다. 개인환경서비스는 현재 표준화 규격 개발을 위해 제조업체, 이동통신사, 연구소, 대학교 등에서 활발히 연구 중에 있으며, 향후에는 현재까지 개발된 데모 시스템을 토대로 프로토콜을 연구, 수립하여 표준화 규격 개발에 기여할 예정이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.340-340
• /
• 2020

본 연구는 산지-도심-해안으로 연결된 해안도시의 지역적인 특성으로 인해 해일과 같은 조위 상승 원인이 침수 및 홍수 위험을 증가시키는 복합재난에 대응하기 위하여 실시간 침수 위험정보 확인 및 대응, 대시민 상황전파 등이 가능하도록 IoT 융합 침수 대응시스템을 개발하는 것이다. 또한, 침수 및 홍수방어벽 등의 구조적대책을 검토하여 실시간 IoT 융합 침수 대응시스템과 연계운영함으로써 해안도시의 시설 및 재산을 보호하고 시민의 안전을 확보하는데 기여할 수 있는 실증연구를 수행하는 것을 목표로 한다. 침수 대응을 위한 구조적 대책은 양산형 IoT 침수 및 하천수위 감지 장비, 센서 연동 침수 및 홍수방어벽, 복합재난알림 디스플레이 등의 개발이며, 비구조적 대책은 강우-하천수위-조위 실측자료기반의 머신러닝 침수위험 분석 모듈 개발, 수치모의에 의한 예상 침수심 및 침수위험지도 작성, 재난상황 전파 알림서비스 등이 있으며 개발된 시제품과 기술을 테스트베드에 적용하고 부산광역시에서 운영하는 재난상황관리시스템인 스마트빅보드(SBB, Smart Big Board)에 연계 및 탑재함으로써 향상된 침수대응 및 대시민 서비스가 가능한 시스템을 구축 및 실증하고자 한다. 센서, 통신, 자료연계 및 분석에 대한 IoT 융합 기술을 침수 대응 기술개발에 적극 활용하여 실측자료와 수치모의 분석 결과가 연계된 침수위험정보를 생산하고 실시간 대응이 가능한 효율적이고 실질적으로 피해를 저감 할 수 있는 기술을 개발하고 적용성을 입증한다면 국내외 해안도시에 확대 보급이 가능해져 침수 피해로부터 효과적으로 국민의 재산과 생명 보호할 수 있다. 또한, IoT 기술을 연계한 재난 모니터링 시스템의 확산으로 복합재난 대응 연구에 기여할 수 있고 상대적으로 실측자료 수집, 연구에 소외되어 온 소하천 등에도 적용이 가능하여 재난으로 인한 사회적 비용을 경감시킬 수 있을 것으로 기대된다.