• Journal of the wind engineering institute of Korea
• /
• v.22 no.4
• /
• pp.155-161
• /
• 2018

In modern society, damage caused by strong winds such as typhoons is expected to increase due to urbanization and global warming. In order to test the reinforcement performance of the newly developed window protection device, two-point force test and uniformly distributed load test were carried out on non-reinforced plate glass. It reinforcement performance of the window protection device was evaluated based on the flexural performance improvement. The analytical performance of the window protection device was evaluated by analysis using differential equations of elastic loading method and deflection curve and Midas-Gen. First, the analytical window protection device was evaluated by formulae derived using differential equations of elastic loading and deflection curve. The validity of the derived formulae investigated by comparing the maximum deflection of the central part of the plate with the experimental value and the theoretical value at maximum load. Then the results were compared with those by finite element FE method using Midas-Gen. Under the experimental conditions, with the window protection device, stress reduction effect up to 40% and deflection reduction up to 71.4% under the same load were obtained. It was also found that it is advantageous to perform the FE analysis using the plate element when the performance is evaluated because the error of FE analysis result using plate elements is far less than that using beam elements.

• Composites Research
• /
• v.36 no.4
• /
• pp.253-258
• /
• 2023

Although the development of transportation means has realized the right to mobility for the disabled who have difficulty in moving, it can be said that the improvement of the safety of passengers with disabilities that can occur in a car accident is lower than that of ordinary passenger seats. In particular, in the case of a rear-end collision that can occur suddenly, it is a reality that disabled passengers are vulnerable to head and neck injuries. Therefore, in this study, a multi-layer headrest foam that divides the headrest into three parts in the coronal plane was proposed to improve the head and neck injury index of disabled passengers in the vehicle in the event of a rear-end collision of a wheelchair transport vehicle. A range of stress scale factors was selected to give various compressive characteristics of the foam through low-speed rear-end collision analysis through a simple model, and GA optimization was performed by specifying the range as a parameter. Through the optimization result, the phase relationship between HIC and NIC was analyzed according to the compression characteristics of the layers. HIC responded most sensitively to the compression characteristics of the front layer and NIC responded to the compression characteristics of the mid layer, and the compression characteristics of the rear layer showed the lowest. A normal headrest and an optimized multi-layer headrest were placed in the validation model to analyze the low-speed rear-end collision sled test, and HIC and NIC were derived lower in the multi-layer headrest than in the general headrest. The compression behavior of the multi-layer headrest was also clearly shown, and it was verified that the multi-layer headrest was effective in improving the injury index of the head and neck compared to the general headrest.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.4
• /
• pp.194-199
• /
• 2022

Preprocessing for high-quality data is required for high accuracy and usability in various and complex image data-based industries. However, when a contaminated hostile example that combines noise with existing image or video data is introduced, which can pose a great risk to the company, it is necessary to restore the previous damage to ensure the company's reliability, security, and complete results. As a countermeasure for this, restoration was previously performed using Defense-GAN, but there were disadvantages such as long learning time and low quality of the restoration. In order to improve this, this paper proposes a method using adversarial examples created through FGSM according to image segmentation in addition to using the VQ-VAE model. First, the generated examples are classified as a general classifier. Next, the unsegmented data is put into the pre-trained VQ-VAE model, restored, and then classified with a classifier. Finally, the data divided into quadrants is put into the 4-split-VQ-VAE model, the reconstructed fragments are combined, and then put into the classifier. Finally, after comparing the restored results and accuracy, the performance is analyzed according to the order of combining the two models according to whether or not they are split.

• Progress in Medical Physics
• /
• v.25 no.2
• /
• pp.100-109
• /
• 2014

In stereotactic body radiotherapy (SBRT), the accurate location of treatment sites should be guaranteed from the respiratory motions of patients. Lots of studies on this topic have been conducted. In this letter, a new verification method simulating the real respiratory motion of heterogenous treatment regions was proposed to investigate the accuracy of lung SBRT for Volumetric Modulated Arc Therapy. Based on the CT images of lung cancer patients, lung phantoms were fabricated to equip in $QUASAR^{TM}$ respiratory moving phantom using 3D printer. The phantom was bisected in order to measure 2D dose distributions by the insertion of EBT3 film. To ensure the dose calculation accuracy in heterogeneous condition, The homogeneous plastic phantom were also utilized. Two dose algorithms; Analytical Anisotropic Algorithm (AAA) and AcurosXB (AXB) were applied in plan dose calculation processes. In order to evaluate the accuracy of treatments under respiratory motion, we analyzed the gamma index between the plan dose and film dose measured under various moving conditions; static and moving target with or without gating. The CT number of GTV region was 78 HU for real patient and 92 HU for the homemade lung phantom. The gamma pass rates with 3%/3 mm criteria between the plan dose calculated by AAA algorithm and the film doses measured in heterogeneous lung phantom under gated and no gated beam delivery with respiratory motion were 88% and 78%. In static case, 95% of gamma pass rate was presented. In the all cases of homogeneous phantom, the gamma pass rates were more than 99%. Applied AcurosXB algorithm, for heterogeneous phantom, more than 98% and for homogeneous phantom, more than 99% of gamma pass rates were achieved. Since the respiratory amplitude was relatively small and the breath pattern had the longer exhale phase than inhale, the gamma pass rates in 3%/3 mm criteria didn't make any significant difference for various motion conditions. In this study, the new phantom model of 4D dose distribution verification using patient-specific lung phantoms moving in real breathing patterns was successfully implemented. It was also evaluated that the model provides the capability to verify dose distributions delivered in the more realistic condition and also the accuracy of dose calculation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.4
• /
• pp.283-289
• /
• 1986

To establish a suitability grouping system of paddy soils for multiple cropping of rice with other upland crops, the study was carried out after a few basic experiments. In succession to the results on basic experiment prior, the suitability system proposed and the results of application mentioned in this report were summarized as follows; 1. The factors of soil properties in the system were productivities represented by soil texture and drainage class, as well as salinity of surface and sub-soil pH of chemical properties were considered together with slope, warmth index, ground water table, parent materials etc. of soil physical or environmental conditions. The weights of the factors were combined with multiplicatively and additively so as the total marks of ideal soil to be 100. The system was composed with 5 suitability classes; over 91 mark is class I, under 60 mark class V, and each 10 point interval between classes. The limiting factors "P" (in the case that Physical properties or Productivity marks under 24), "S" (Surface slope less than 15) and "C" (Chemical condition below 15) etc. were appended up to two kinds to the classes except a part of soils in class I. 2. The areas where the warmth index exceed 110 in Yeongnam were 19% for class I, 22.7% for class II, 44.7% for class III, 11.5% for class IV, and 2.1% for class V. The rates in class I and II were slightly more than those of the whole country. 3. The points of each soil gained by the system had a positive correlation ($r=.922^{**}$) with the potential productivities.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_2
• /
• pp.699-708
• /
• 2017

The present study was to develop an approach for predicting soybean yield using a crop growth simulation model at the regional level where the detailed and site-specific information on cultivation management practices is not easily accessible for model input. CROPGRO-Soybean model included in Decision Support System for Agrotechnology Transfer (DSSAT) was employed for this study, and Illinois which is a major soybean production region of USA was selected as a study region. As a first step to predict soybean yield of Illinois using CROPGRO-Soybean model, genetic coefficients representative for each soybean maturity group (MG I~VI) were estimated through sowing date experiments using domestic and foreign cultivars with diverse maturity in Seoul National University Farm ($37.27^{\circ}N$, $126.99^{\circ}E$) for two years. The model using the representative genetic coefficients simulated the developmental stages of cultivars within each maturity group fairly well. Soybean yields for the grids of $10km{\times}10km$ in Illinois state were simulated from 2,000 to 2,011 with weather data under 18 simulation conditions including the combinations of three maturity groups, three seeding dates and two irrigation regimes. Planting dates and maturity groups were assigned differently to the three sub-regions divided longitudinally. The yearly state yields that were estimated by averaging all the grid yields simulated under non-irrigated and fully-Irrigated conditions showed a big difference from the statistical yields and did not explain the annual trend of yield increase due to the improved cultivation technologies. Using the grain yield data of 9 agricultural districts in Illinois observed and estimated from the simulated grid yield under 18 simulation conditions, a multiple regression model was constructed to estimate soybean yield at agricultural district level. In this model a year variable was also added to reflect the yearly yield trend. This model explained the yearly and district yield variation fairly well with a determination coefficients of $R^2=0.61$ (n = 108). Yearly state yields which were calculated by weighting the model-estimated yearly average agricultural district yield by the cultivation area of each agricultural district showed very close correspondence ($R^2=0.80$) to the yearly statistical state yields. Furthermore, the model predicted state yield fairly well in 2012 in which data were not used for the model construction and severe yield reduction was recorded due to drought.

• KDI Journal of Economic Policy
• /
• v.13 no.1
• /
• pp.115-134
• /
• 1991

The role of pension plans in the macroeconomy has been a subject of much interest for some years. It has come to be recognized that pension plans may alter basic macroeconomic behavior patterns. The net effects on both savings and labor supply are thus matters for speculation. The aim of the present paper is to provide quantitative results which may be helpful in attaching orders of magnitude to some of the possible effects. We are not concerned with the providing empirical evidence relating to actual behavior, but rather with deriving the macroeconomic implications for a alternative possibilities. The pension plan interacts with the economy and the population in a number of ways. Demographic variables may thus affect both the economic burden of a national pension plan and the ability of the economy to sustain the burden. The tax transfer process associated with the pension plan may have implications for national patterns of saving and consumption. The existence of a pension plan may have implications also for the size of the labor force, inasmuch as labor force participation rates may be affected. Changes in technology and the associated changes in average productivity levels bear directly on the size of the national income, and hence on the pension contribution base. The vehicle for the analysis is a hypothetical but broadly realistic simulation model of an economic- demographic system into which is inserted a national pension plan. All income, expenditure, and related aggregates are in real terms. The economy is basically neoclassical; full employment is assumed, output is generated by a Cobb-Douglas production process, and factors receive their marginal products. The model was designed for use in computer simulation experiments. The simulation results suggest a number of general conclusions. These may be summarized as follows; - The introduction of a national pension plan (funded system) tends to increase the rate of economic growth until cost exceeds revenue. - A scheme with full wage indexing is more expensive than one in which pensions are merely price indexed. - The rate of technical progress is not a critical element in determining the economic burden of the pension scheme. - Raising the rate of benefits affects its economic burden, and raising the age of eligibility may decrease the burden substantially. - The level of fertility is an element in determining the long-run burden. A sustained low fertility rate increases the proportion of the aged in total population and increases the burden of the pension plan. High fertility has inverse effects.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.313-318
• /
• 1998

Using direct headspace sampling (DHS) method, volatile terpenoid content was measured according to carrot cultured areas and various portions of carrot. In comparison of volatile terpenoid content in xylem and phloem of carrot, every volatile terpenoid was distributed highly in the xylem rather than the phloem of carrot. The carrot was divided into three different sections; upper (crown), middle (midsection), and lower part (tip), and the volatile terpenoids were measured. The content of ${\alpha}-pinene,\;{\beta}-pinene,\;{\beta}-myrcene,\;and\;{\gamma}-terpinene$ tended to be distributed highly in the upper part rather than the lower part, whereas the content of terpinolene and total terpenoids tended to be high in the lower part. In comparison of volatile terpenoid content according to the carrot cultured areas, volatile terpenoid content of carrot cultured in Cheju island was higher than Yangsan and Haenam areas. In case of total terpenoids, the carrot clutivars cultured in Cheju island contained $1.6{\sim}2.3\;times$ higher than those of Yangsan, and $1.5{\sim}2.4\;times$ higher than Haenam. In order to investigate the above results, we sampled out soils from the carrot fields and measured physical and chemical characteristics of the soils. The pH did not show much difference in the three areas. However the organic carbon, total nitrogen, cation exchange capacity, and total exchangeable cation in soil from Cheju were $2.4{\sim}3.0\;times$ higher than Yangsan and $3.9{\sim}7.1\;times$ higher than Haenam. The physical characteristics of the soils was investigated. The soil from Cheju island was found to be loam; Yangsan, sandy loam, and Haenam, clay loam.

• Journal of radiological science and technology
• /
• v.36 no.4
• /
• pp.291-297
• /
• 2013

This study is aimed to evaluate the effect of $T_{1/2}$ upon count rates in the analysis of dynamic scan using NaI (Tl) scintillation camera, and suggest a new quality control method with this effects. We producted a point source with $^{99m}TcO_4^-$ of 18.5 to 185 MBq in the 2 mL syringes, and acquired 30 frames of dynamic images with 10 to 60 seconds each using Infinia gamma camera (GE, USA). In the second experiment, 90 frames of dynamic images were acquired from 74 MBq point source by 5 gamma cameras (Infinia 2, Forte 2, Argus 1). There were not significant differences in average count rates of the sources with 18.5 to 92.5 MBq in the analysis of 10 to 60 seconds/frame with 10 seconds interval in the first experiment (p>0.05). But there were significantly low average count rates with the sources over 111 MBq activity at 60 seconds/frame (p<0.01). According to the second analysis results of linear regression by count rates of 5 gamma cameras those were acquired during 90 minutes, counting efficiency of fourth gamma camera was most low as 0.0064%, and gradient and coefficient of variation was high as 0.0042 and 0.229 each. We could not find abnormal fluctuation in $x^2$ test with count rates (p>0.02), and we could find the homogeneity of variance in Levene's F-test among the gamma cameras (p>0.05). At the correlation analysis, there was only correlation between counting efficiency and gradient as significant negative correlation (r=-0.90, p<0.05). Lastly, according to the results of calculation of $T_{1/2}$ error from change of gradient with -0.25% to +0.25%, if $T_{1/2}$ is relatively long, or gradient is high, the error increase relationally. When estimate the value of 4th camera which has highest gradient from the above mentioned result, we could not see $T_{1/2}$ error within 60 minutes at that value. In conclusion, it is necessary for the scintillation gamma camera in medical field to manage hard for the quality of radiation measurement. Especially, we found a tendency that count rate changes over time at this study, and we proved that it can effect $T_{1/2}$. And also, there is need of appropriate phantoms and the method of quality management like this study, because there are not any advice or limitation degrees for domestic medical purpose scintillation camera.

• Korean journal of applied entomology
• /
• v.24 no.1 s.62
• /
• pp.29-33
• /
• 1985

Every plant in $990m^2$ onion field was inspected for damages by the onion maggot. Maps were constructed every ten days to show which plants were infested and which were not from April 11 to May 21, 1984. The maps were sectioned into squares one of which contains 80 onion plants and the counts of damaged onions in each square were fitted to poisson and negative binomial distribution and tested by chi-square. We argue that the satisfactory fitness of the expected negative binomial $[P(x^2)>0.05]$ provided a useful description of the spatial distribution patterns of the damaged onions. Edge effect was tested by the differences of damage ratio and variance/mean ratio (${\sigma}^2/m$) between edge and center part. The result showed that the damage ratioes and variances of all the periods, ${\sigma}^2/m$ values after May 1 were greater in edge part than in center part. Again, the maps were sectioned into four blocks and the squares (sample units) were sectioned into quadrants. By application of the variance component technique, it was suggested that $2{\sim}8$ sample units for 5% sampling error and $1{\sim}2$ sample units for 10% error should be sampled randomly to estimate the damage ratio when $2{\sim}3$ quadrants were inspected.