• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.481-484
• /
• 2011

최근 철도는 미래의 핵심교통수단이자 저탄소 녹색성장을 대표하는 교통수단으로 주목받고 있다. 그 중 자기부상열차는 바퀴 마찰에 따른 소음 진동 분진이 없는 차세대 교통수단이며, 이를 지지하는 구조물(교량)은 열차의 운행 안정성(동적거동)을 고려한 설계가 필요하다. 또한, 상부 구조물은 자기부상열차의 연행이동등분포하중을 지지하며, 이러한 하중조건을 갖는 차량이 운행할 때 상부 구조물은 설계기준사항들을 만족해야한다. 도시형 자기부상철도 토목구조물 설계기준에 의하면 도시형 자기부상철도의 운행 안정성(동적거동)을 평가하기 위한 항목들로 대상 구조물의 고유진동수, 승차감을 고려한 연직처짐 등이 요구된다. 따라서, 본 연구에서는 자기부상열차의 실 열차하중을 고려하여 연행이동등분포하중으로 철도교량의 동적거동을 검토하였으며, 설계기준을 적용하여 대상 철도 교량의 운행 안정성을 평가하였다.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.203-216
• /
• 1997

The Equivalent vehicle load factors of Beams and Girders on parking garage structure are proposed in this study. Without taking the sophisticated numerical analysis for the concentrated wheel loads, the design member forces of beam and girder can be easily calculated only with those for the distributed load by using the constructed relationships between the equivalent vehicle load factor and the length of member. Besides, the standard vehicle with total weight of 2.4ton is designed based on the review of many foreign design codes for parking garage and the investigation of small to medium vehicles made in Korea. Finally the efficiency and the reliability of the proposed equivalent vehicle load factors are demonstrated through the application of the typical beam and girder.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.181-184
• /
• 2008

In the case of RC beams simply supported, there is arch action that the length of internal lever arm varies through span. Recently the shear analysis model which considers this arch action has been developed, but this analysis model is only applicable to RC beams subjected to concentrated load. In this study, therefore, the fundamental relationship between internal lever arm length and applied moment is developed with considering general load such as uniformly distributed load. The shear compatibility condition is also derived, which is also applicable to RC beams subjected to uniformly distributed load. From the analysis results of RC beams, the variation of shear strains through span could be expected by the proposed analysis model. The magnitude of shear strains expected from analysis is so relatively small that the effect of shear force due to arch action should be considered on analysis.

• Computational Structural Engineering
• /
• v.3 no.1
• /
• pp.109-116
• /
• 1990

Live load data in domestic office buildings have been collected in a systematic manner. Based on surveyed data, equivalent uniformly distributed load intensities, which produce the same load effect as the actual spatially varying, live load, have been obtained for various structural members (such as slab, beam, column, etc. ). Influence surface method has been employed to compute load effects under real live load, including beam moment, slab moment as well as axial force in column. The results have been examined to find probabilistic characteristics and relationship between influence area and load intensity (or coefficient of variation). The results were also compared with other survey results and found to be reasonable. Based on the probabilistic load models obtained, the lifetime extreme values have been analyzed and compared with current design loads. Tentative equations applicable to decide more rational design loads are also suggested as functions of influence area.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.429-434
• /
• 2000

본 연구에서는 등분포하중을 받는 laminated 박판의 거동해석을 제시하였다. 접착한 두 박판의 비선형 지배방정식을 Von Karman 식을 이용하여 유도하고 박판의 거동을 차분법을 이용하여 수치해석 한다. Interlayer에서의 전단변형을 고려하여 지배방정식에 포함시켜 하중 증분법(load incremental method)으로 기하학 비선형 해석을 수행한다. 하중 증분법에 따른 반복법을 도입하여 비선형 방정식을 해석했다. 해석방법의 타당성을 입증하기 위하여 해석결과들을 기존의 문헌의 결과와 비교, 검토함으로써 본 논문에서 제시한 이론 및 해석방법의 타당성을 입증한다. 차분법의 하중 증분법 알고리즘을 개발하여 예제문제에 대한 수치해석 결과들을 논하였다.(중략)

• Journal of Bio-Environment Control
• /
• v.17 no.3
• /
• pp.188-196
• /
• 2008

Single span pipe greenhouses (pipe houses) are widely used in Korea because these simple structures are suitable for construction by farmers thus reducing labor cost. However, these pipe houses are very weak and frequently damaged by heavy snow and strong wind. Pipe house is constructed by pipe fabricator, which is anchored to the ground by inserting each pipe end into ground to $30\sim40cm$, so the ground support condition of pipe end is not clear for theoretical analysis on greenhouse structure. This study was carried out to find out the suitable ground support condition needed f3r structural analysis when pipe house was designed. The snow and wind loading tests on the actual size pipe house were conducted to measure the collapsing shape, displacement and strain. The experimental results were compared with the structural analysis results for 4 different ground support conditions of pipe ends(fixed at ground surface, hinged at ground surface, fixed under ground and hinged under ground). The pipe house under snow load was collapsed at the eaves as predicted, and the actual strain at the windward eave and ground support under wind load was larger than that under snow load. The displacement was the largest at the hinged support under ground, followed by the hinged at ground surface, the fixed under ground and then the fixed at ground surface independent of displacement direction and experimental loading condition. The experimental results agreed most closely with the results of theoretical analysis at the fixed condition under ground among 4 different ground support conditions. As the results, it was recommended that the pipe end support condition of single span pipe greenhouse was the fixed under ground for structural analysis.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.3
• /
• pp.225-240
• /
• 2006

In order to calculate bending moments of rectangular plates with three edges clamped the other free subjected to both a uniform load and a triangular load, a finite difference equation for the non-dimensional governing equation are presented and numerical solutions with different aspect ratios and/or number of grid points are analyzed. The finite difference solutions are obtained by use of grid points up to 11,520 and the optimum grid points according to aspect ratios of the plate are presented as well. The obtained numerical solutions are shown to satisfy the given x moment boundary condition at the free edge, which can not be satisfied in Levy's analytical solutions and peculiar behaviour of the calculated moments is observed around the corners between the free edge and fixed ones. The numerical solutions of bending moments subjected to both a uniform load and a triangular load are compared with the corresponding analytical solutions which are shown in very good agreement on the solution domain except the neighborhood of the free edge.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.2
• /
• pp.21-28
• /
• 1987

The paper describes the analysis of large displacement problems including instability phenomena. The element used in this is a degenerated isoparametric shell element with eight nodes. Total Lagrangian formulation has been adopted in this study using Newton-Raphson iteration method with incremental load. The linear stability analyses performed usually for the initial position can be repeated at several advanced fundamental states on the non-linear buckling path. Thus a current estimate of the failure load is given. The numerical examples of a cylindrical panel under uniform load, simply supported plate under axial load, and clamped plate under uniform load are carried out. The examples applying degenerated isoparametric elements to bifurcation buckling and nonlinear collapse problems are also performed.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.87-91
• /
• 2001

얕은 기초의 침하는 기초에 가해지는 상재 하중의 지반에 전달될 때 분포되는 응력의 특성과 크기에 관련되어 일어난다. 일반적으로 지반의 보강재로 사용되는 지오그리드로 두께가 작은 토체를 보강하면 지중에 전달되는 응력을 재분포시켜 감소시킨다. 이 논문에서는 현장시험을 통하여 여러 층의 지오그리드로 토체를 보강시 토체 상부에 가해지는 원형 등분포 하중하에서 토체의 응력 분포를 측정하였다. 인천국제 공항 건설 현장의 준설 매립 구간에서 행하여진 이 시험을 통하여, 지오그리드로 보강된 토체의 하중 분포는 기초에 가해지는 하중 강도와, 보강재 포설층수, 토체의 두께의 함수로 나타낼 수 있다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.04a
• /
• pp.60-64
• /
• 1991

The shear behavior of reinforced concrete beams subjected to uniform loading was investigated by testing 1/3 small-scale model R/C beams. The emphasis was placed in finding a fundamental difference in behavior between in uniformly loaded beams and in point loaded beams. The major variable was the span-to-depth ratio, varying from 4 to 12. The concrete strength and steel ratio were fixed.