• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.82-90
• /
• 2013

In this paper, conducted emission from the MDS(Motor Drive System) of a HEV/EV was analyzed using high- frequency circuit modeling in system-level approach. The conducted emission by PWM process can cause RFI(radio- frequency interference) problems in the AM/FM frequency range. In order to mitigate this conducted emission, a high-frequency equivalent circuit model is proposed by analyzing the fundamental circuits, parasitic components in their parts and connections and non-linear characteristics of IGBTs, high-power capacitors, inverters, motors, high-power cables, and bus bars which are composed of the MDS. It is confirmed that the simulated result by the proposed model is well agreed with measured results in spite of a large-scaled analysis in system level. We are looking forward that this approach can be effectively used in the EMC design of HEV/EV.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.528-533
• /
• 2021

This paper presents the PCB heat dissipation characteristics of high density DC-DC converter for electric vehicles. This paper also analyzes the heat dissipation structure of the high density DC-DC converter and optimizes the PCB heat dissipation design of the high density power system through thermal analysis simulation. Based on heat transfer theory, the thermal path of general electronic devices is analyzed and the thermal resistance equivalent circuit is modeled in this paper. Additionally, the thermal resistance equivalent circuit of the 500W synchronous buck converter, which is addressed in this paper, is modeled to present a structural heat dissipation path for better thermal performance. The validity of the proposed scheme is verified through the thermal analysis simulation results and experiments applying multi-surface heat dissipation structure to a 500[W](12[V], 41.67[A]) synchronous buck converter prototype with an input voltage 72[V].

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1999

교류전동기 구동을 위한 산업용 전력전자 시스템은 전력회생용 양방향 컨버터, VVVF 인버터, 교류전동기 벡터제어기, 및 다양한 전기ㆍ기계적 연계 장치들을 포함하는 전기기계 복합시스템 특성을 지니기 때문에 전체 시스템에 대한 컴퓨터 시뮬레이션이 용이하지 않다. 일반적으로 이러한 복잡성을 해결하기 위한 방안으로서 시스템을 근사화시키고 이에 대한 수학적인 등가모델을 유도한 후 이를 이용하여 시뮬레이션을 행하고 있지만, 이 경우 실계통의 다이나믹특성을 정확히 표현할 수 없기 때문에 시뮬레이션 신뢰성이 저하될 수 있다 본 논문에서는 가변구조 제어기법에 의해 역률1 제어기능을 갖는 PWM 컨버터, VVVF 인버터 및 유도기 간접벡터제어기 둥을 포함하는 유도전동기 구동전력전자 시스템을 다이나믹 노드 기법(Dynamic Node Technique DNT)과 시뮬링크(Simulink)를 이용하여 실제회로 구성상태와 유사한 형태로 시뮬링크 윈도우상에서 설계하고, 이를 통해 시뮬레이션을 행할 수 있는 기법을 제시한다. 시뮬레이션 결과를 통하여 전력전자 시스템의 특성과 제시된 다이나믹 노드 기법과 시뮬링크를 이용한 시뮬레이션 기법의 유용성을 보였다.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.253-256
• /
• 1991

Tie constructed the equivalent circuit of the magnetotransistor by the representation of the operating principle as two independent current sources. The equivalent circuit has been analyzed quantatively and the calculated values agreed to the experimental ones. It has been found out that the structure of MT inflenuces on the relative sensitivity and the structure parameters can be extracted from the equivalent circuit.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1506-1508
• /
• 2001

We have investigated for the modeling and the simulation of the ferroelectric capacitor and MFS TFT (Metal-Ferroelectric-Semiconductor Thin Film transistor). For ferroelectric capacitor modeling, we adopted the equivalent circuit model which consists of a nonlear capacitor, a nonliner resistor, and a linear capacitor. MFS TFT have been modeled by combining the ferroelectric capacitor and Bsim3 MOSFET model. Our simulations show the characteristics of ferroelectric capacitor and MFS TFT.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.221-224
• /
• 2008

본 논문은 일사량과 온도의 조건에 따른 태양전지 셀의 등가회로 모델을 모델링하였고, 이를 바탕으로 제작사의 태양광 모듈을 시뮬레이션하여 비교 검토하였다. 검토결과 태양광 모듈의 사양서와 시뮬레이션 값의 오차율이 낮아 신뢰성을 확보할 수 있었으며, 또한 최적인 태양광 모듈 어레이를 시뮬레이션하여 최적인 태양전지 모듈 어레이의 규모를 선택하여 독립형 태양광 시스템을 구현하였다. 또, 특정지역에 설치 최적인 출력전력도 시뮬레이션을 통하여 알아보았다.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1019-1026
• /
• 1996

In this study, we may be presented the carrier oscillation properties for the low-voltage varistor fabricated by a new method of three composition seed grain, in order to analyze the behavior of carriers at the its equivalent circuit model. The oscillation phenomena of carriers appeared from current-voltage characteristics under knee voltage is shown by the transient flow of nontrapped carriers group in the trap level of intergranular layer, surface state and/or depletion layer. In particularly, current oscillation phenomena is hardly shown in the high electric field. It is that the injected carriers from both electrodes are directly from the conduction band of forward biased ZnO grain through the intergranular layer into the reverse biased ZnO grain, because the trap level in the electric field above the knee voltage is mostly filled.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.315-317
• /
• 1999

This paper presents a method for determining of the equivalent d-q model parameters of three-phase squirrel cage induction motors. The method is based on the use of a finite-element field calculation which enables the precise slot geometry to be modelled accurately, and includes the effects of magnetic saturation of iron core. The proposed method can reduce computational costs compared with the method that needs the iterative field analysis to obtain the impedance. It is verified that the circuit inductances are shown as functions of the current.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.2
• /
• pp.104-112
• /
• 2015

This paper deals with an methodology for acquiring optimal order of rational function model in FDNE(frequency dependent network equivalents) with GA(genetic Algorithm). In order to analyze the modern power system with huge complexity, an practical and efficient equivalent model is needed which represents the system's characteristics of transient phenomenon. this paper shows developing a z domain rational function model which have the resultant coefficient from proposed GA simulation. To demonstrate this methodology, some simulations are performed with practical power system of NZ which applied with fault condition and nonlinear converter load.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.212-214
• /
• 2020

리튬이온 배터리를 고온의 환경에서 장시간 운용함에 따라 배터리 내부 물질의 변형 및 특성 변화가 발생하여 안전성의 문제가 발생하게 된다. 배터리의 안전성을 향상하기 위해 배터리의 고장 및 이상 상태를 진단 및 탐지하는 기법들의 연구가 진행되고 있다. 본 논문에서는 배터리의 이상 상황을 모사하기 위해 열폭주의 한 가지 방법인 고온의 환경에서 배터리의 특성 변화를 전기화학적 임피던스 분광법을 통해 분석하였으며, 등가회로 모델의 특성 인자를 활용하여 이상 상황을 탐지할 수 있는 이동 평균 추세선 기반의 이상 탐지 기법을 제안하며, 열폭주가 발생한 데이터를 통해 이상 탐지 기법을 검증한다.