• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.7
• /
• pp.557-570
• /
• 2014

The heat transfer, pressure loss, and thermal performance in a cooling channel were evaluated for various new fan-shaped pin-fin geometries using three-dimensional Reynolds-averaged Navier-Stokes equations. The turbulence was modeled using the low-Reynolds-number SST turbulence model in the Reynolds number range of 5,000-100,000. The numerical results for the area-averaged Nusselt numbers were validated by comparing them with the experimental data under the same conditions. A parametric study for three types of fan-shaped pin-fin geometries was performed with two parameters, namely, the leading and trailing reduction angles.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.3 no.1
• /
• pp.81-95
• /
• 1995

공기의 흐름 중에 있는 유한 날개의 끝에서는 날개끝 와류로 인하여 날개에 내리흐름(downwash)이 발생하게 된다. 이러한 내리흐름은 유도항력을 발생시켜 양항특성이 감소하게 된다. 따라서 날개끝 와류를 적절히 제어하면 어느 정도 유도항력을 감소시킬 수 있다. 본 논문에서는 직사각형 날개와 테이퍼형 날개 끝에 여러 가지 형상의 strake를 장착하거나, 날개끝 와류를 제어하기 위하여 여러 개의 slot을 형성시켰을 때의 양항특성을 실험 및 수치해석으로 연구한 결과를 기술하였다. 실험결과 직사각형 날개끝에 장착한 wing tip strake의 밑변을 바깥쪽으로 절단한 wing tip strake의 양항특성이 받음각 $8^{\circ}$ 이상에서 우수하였고, 반면에 밑변을 절단하지 않은 경우는 받음각 $0^{\circ}\;^{\sim}\;8^{\circ}$ 사이에서 기본날개보다 양항비가 증가하였다. 테이퍼형 날개끝에 wing tip strake를 장착하였을 때의 양항비는 받음각 전 범위에 걸쳐 기본날개보다 증가하였으며, 받음각$8^{\circ}$ 이상에서 wing tip strake의 밑변을 절단하지 않은 wing tip strake의 양항특성이 우수하였다. 방사형 다중슬롯의 경우 날개끝의 앞전보다 뒷전 쪽에 형성시키는 것이 양항비특성이 우수하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.6
• /
• pp.448-457
• /
• 2013

This paper presents the design of an active flutter suppression system for flexible wing using sliding mode control method. The aerodynamic force generated by the motion of a flexible wing control surface is utilized as control force. For this purpose, aeroservoelastic model is formulated by blending aeroelastic model, control surface actuator model, and gust model. A sliding mode controller is designed for active flutter suppression on the aeroservoelastic model in conjunction with Kalman filter that estimates the system states based on the measured output. The performance of the designed controller is demonstrated via numerical simulation for the representative flexible wing model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.1-10
• /
• 2006

In the present study, the aerodynamic characteristics of elliptic airfoils are investigated numerically based on the RANS equations and the S-A turbulent model on unstructured meshes. Unlike the NACA series airfoil sections, elliptic airfoils have a relatively small leading edge radius and a rounded trailing edge. Also the maximum thickness is located in the middle of the chord. This geometric characteristics are responsible for the difference in the aerodynamic characteristics from those of NACA family airfoils. To identify the aerodynamic characteristics of elliptic airfoils, the results were compared with those of NACA series airfoils with a same maximum thickness. The effect of airfoil thickness variation on the aerodynamic characteristics were also investigated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.12
• /
• pp.1059-1066
• /
• 2007

An experimental study has been conducted to investigate the flow separation control effects of a blowing jet on an elliptic airfoil at a Reynolds number of 7.84×105 based on the chord length. A blowing jet was obtained by pressing a plenum inside the airfoil and ejecting flow out of a thin jet slot that located in leading edge or trailing edge. The experimental results have shown that the blowing jet had an effect of suppressing the flow separation, resulting in the higher suction pressure distribution and higher normal force. The increase in Cn was more pronounced at higher incidence, whereas the effectiveness of the blowing jet reduced at lower incidences. The leading edge pulsating blowing with 90° was the most effective in controlling the flow separation than other types of blowing jet configuration tested in this research. Moreover, when the pulsating blowing was applied, the stall angle was postponed about 2°-3°. The continuous and pulsating blowing jet is a direct and effective flow separation control for improving the aerodynamic characteristics and performances of airfoil.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.3
• /
• pp.211-219
• /
• 2008

A three-dimensional inviscid flow solver has been developed based on unstructured meshes for the investigation of the effect of the external stores on the tail surfaces of a generic fighter aircraft. The numerical method is based on a vertex-centered finite-volume discretization and an implicit point Gauss-Seidel time integration. The calculations were made for a steady flow and the computed results were compared with experimental data to validate the flow solver. An unsteady time-accurate computation of the generic fighter aircraft with external stores at transonic flight conditions showed that the external stores cause unsteady loading on the horizontal tail surface due to the mutual interference between their wake and the horizontal tail surface. It was shown that downward deflection of the trailing edge flap significantly reduces the undesirable interference effect.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.109-117
• /
• 2020

A structured grid system can be efficiently constructed by applying the patched-grid algorithm that alleviates many constraints of the conventional structured grid system. Three approaches were applied to case 4 of the EFD-CFD workshop: delta wing-cylindrical body shape to solve the existing grid generation problems and verify the results by comparing them with experimental data. Surface pressure distributions slightly differed from the experimental data at high angles of attack. The slope variation of the pitching moment with Mach number is analyzed and the variation can be explained with the tuck under phenomenon. In the supersonic region, the bow shock waves in front of the shape expand the region generating lift up to the rear of the configuration. Also, the tendency of the pitching moment with both Mach number and angle of attack was analyzed by comparing the positions of the center of pressure and the center of gravity.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.3
• /
• pp.183-191
• /
• 2015

In this study, the finite element analysis was carried out to investigate dynamic characteristics of the AGF(Active Gurney Flap) which is under development for reducing vibration and noise of the helicopter rotor system. The Gurney flap is a kind of small flat plate, mounted normal to the lower surface of the airfoil near to the trailing edge. An electric motor, L-shaped linkages and flap parts were integrated into a rotor bade, and 3~5/rev control was given to the AGF to reduce the vibration in the fixed frame. Thus, an explicit time integration method was adopted to investigate the dynamic response of the AGF with considering both centrifugal force due to the rotor rotation and active control input, and it can be seen that the vertical displacement of the AGF was satisfied to meet the design requirement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.7
• /
• pp.1-8
• /
• 2005

For study on the unsteady wall interference effect, flows around a circular cylinder in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The computed results showed that the unsteady pressure gradient over the cylinder is enhanced by the wall interference, and as a result the fluctuations of lift and drag are augmented. The drag is further increased because of the lower base pressure. The vortex shedding frequency is also increased by the wall interference. The pressure on the test section wall shows the harmonics having the shedding frequency contained in the wall effect.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.83-92
• /
• 2015

This study identifies problems of the administrative legislation (or the delegated legislation) by analyzing articles of laws, orders, and ordinances regarding the sinking of Sewol. According to the result, both of Rescue and Aid at Sea and in the River Act and Marine Transportation Act require to be complemented by additional administration legislations. Therefore bureaucrats enacted defective orders and ordinances, which became an institutional background of the sinking of Sewol. In other words, excessive administrative legislations enabled the Marine Rescue and Savage Association to exert exclusive authorities and caused insufficiencies of supervision over the Association and management for safe navigations. They resulted in corrupt relationships between bureaucrats and businesses and eventually brought citizens' lifes in mortal danger. Consequently, specialty of congressmen should be improved to avoid these excessive administration legislations. At the same time, autonomous control of the administration itself should get enhanced to regulate them. The theoretical implication of this study is that problems of the administrative legislation and necessity of the control by the National Assembly, which have been discussed abstractly and normatively, are clarified empirically, and the practical implication is that the institutional background of the sinking of Sewol is clarified and solutions to improve the institutions are proposed.