• Therapeutic Science for Rehabilitation
• /
• v.9 no.2
• /
• pp.87-98
• /
• 2020

Objective : The purpose of this study was to verify the effectiveness of home-visit occupational therapy in stroke patients. Methods : Two patients with stroke who applied for home-based occupational therapy services at a health center in Seoul were enrolled. The home-visit occupational therapy program evaluates the subject's daily living, task performance, cognitive, and emotional functions, sets occupational therapy goals and plans interventions based on a client-centered approach. Occupational therapy programs consisted of 12 sessions based on the client's major problems. Results : COPM scores improved in both cases, there was an improvement in COPM scores, and in Case 2 there were improvements in MBI and K-MMSE scores. There was also an improvement in KGDS scores in Case 1. Conclusion : Home-visit occupational therapy was found to be effective in improving daily activities, cognition, and mental function of stroke patients. During home and community integration, continuous and continuous rehabilitation services need to be activated from institutional rehabilitation to community-based rehabilitation. Active home-visit occupational therapy is needed to promote physical, cognitive, mental and social access in stroke patients discharged from hospitals.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.10
• /
• pp.1050-1057
• /
• 2012

This study helps develop a cool body armor that maintains a tight-fit configuration to the body surface and evaluates the performance of newly developed body armor in a wear test. Three types of body armor were used for evaluation. One was a tight fitting body armor that was constructed to improve the degree of fit and ease of movement for Korean soldier using 3D technology. Another was ventilating body armor with attached spacers on the shoulder to reduce the thermal stress on the soldier. The third was a prevailing body armor produced by a Korean body armor company. In order to evaluate the performance of the body armor, a human wear test, a thermal mannequin test, and computational fluid dynamics (CFD) were executed. Five subjects participated in the wear test. Subjective wear sensation, total amount of sweat and dynamic change of clothing microclimate were observed during and after exercise on a treadmill; subsequently, it was found that subjects rated tight fitting body armor and ventilating body armor lighter, drier, and easier to move than the conventional body armor (p<.05). Total amount of sweat was the least in the case of ventilating body armor. The thermal resistance and vapor resistance of the ventilating body armor were improved remarkably. In addition, the skin temperature of the ventilating body armor with spacers was lower than the tight fitting body armor by at least $1^{\circ}C$ in the CFD result. It is noted that thermal-wet comfort of the 3D body armor with ventilating feature is superior to the conventional body armor, especially when the ventilating channel is not closed due to a backpack.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.13-21
• /
• 2011

In this paper, the CMOS programmable interface circuit for MEMS gyroscope is presented, and evaluated with the MEMS sensing element. The circuit includes the front-end charge amplifier with 10 bit programmable capacitor arrays, 9 bit DAC for accurate offset calibration, and 10 bit PGA for accurate gain calibration. The self oscillation loop with automatic gain control operates properly. The offset error and gain error after calibration are measured to be 0.36 %FSO and 0.19 %FSO, respectively. The noise equivalent resolution and bias instability are measured to be 0.016 deg/sec and 0.012 deg/sec, respectively. The calibration capability of this circuit can reduce the variations of the output offset and gain, and this can enhance the manufacturability and can improve the yield.

• Journal of the Korea Society for Simulation
• /
• v.30 no.4
• /
• pp.9-19
• /
• 2021

Electronic voting has been recognized as an alternative to complement the limitations of existing paper voting. At the same time, security concerns are being raised. This paper presents a blockchain-based electronic voting and survey system that can guarantee reliability. Our smart contract was created using Solidity on Ethereum which is a blockchain-based distributed computing platform, and the system was implemented in connection with the Javascript based user interface. In addition, in order to protect the personal information of participants, the system is generating hash of the personal data and storing the hash of users for the contract data. Since we exploited different kinds of languages for the system, we derived items of functionality testing and presented the functionality testing result. Moreover, we made use of the Chrome's performance evaluation functionality to see the response time of the blockchain-based system. In addition, we compared the performance with the system which has the same functionality on database. The contribution of this research is design and implementation of blockchain-based electronic voting system and presentation of the functionality and performance simulation result.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.5
• /
• pp.1099-1116
• /
• 2019

Industrial control systems(ICS) are widely used in various industrial area and critical infrastructure. To mitigate security threats on ICS, the security assurance test for industrial control devices has been introduced and operating. The test includes testing of the security function of the device itself and testing of communication robustness. In this paper, we describe the security requirements of EDSA, Achilles, and Korea's TTA standard(security requirements for ICS). And also, we analyzed the characteristics of communication robustness test(CRT) of each certification. CRT verifies the device's operation of essential function while transmitting fuzzing and stress packets. Existing test methods are mostly focused on the embedded devices and are difficult to apply to various devices. We propose a method to test communication robustness which reflect the characteristics of control H/W, control S/W, field devices and network devices in ICS. In the future, we will apply the proposed communication robustness test to actual products and present solutions for arising issues.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.82-86
• /
• 2016

This paper proposes a method for the immobilization of motorbike brakes in conjunction with near-field communication (NFC) technology in order to meet the increasing demand for security and convenience of motorbike drivers. We thought about the concept of wireless key, NFC security devices and automatic solenoid valve for setting the lock and unlock module. This paper propose the design and development of an innovative anti-theft alarm system for motorcycles using NFC smart devices based on RFID system, the basis of IoT and AES(advanced encryption standard) encryption Algorithm. The design concept is based on NFC communication strategy between the vehicle and owner. To do this concept, we designed motorcycle smart key system with general-purpose NFC system and the automatic solenoid valve for setting the lock and unlock module. First, we designed control unit and NFC card reader for motorcycle smart key system. Then we propose an AES encryption algorithm and prove that the motorcycle key system is controllable by showing the result of implementing and testing, after installing.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.52-63
• /
• 1998

In this paper, several improvements to a copy network proposed previously for multicast packet switching are described. The improvements provide a solution to some problems inherent in multicasting. The input fairness problem caused by overf low is solved by a dynamic starting point decider(DSD), which can calculate running sums of copy requests starting from any input port. The starting point is changed adaptively in every time slot based on both the fill level of the input buffers in current time slot and the overflow situations of the previous time slot. Using the fill level of the conventional network. The DSD also provides the function of regulating overall copy requests according to the amount of input traffics. This is an essential function in improving overall throughputs of the copy networks. The throughput of a multicast switch can be improved substantially if partial service of copy request is implemented when overflow occurs. Call-splitting can also be implemented by the DSD in a straightforward manner. The hardware for the DSD is derived with the objective of simple architectures for the high speed operation. Simulation study of the copy network under various traffic conditions is presented to evaluate its performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.6
• /
• pp.1523-1537
• /
• 2018

The AI speaker is a simple operation that provides users with useful functions such as music playback, online search, and so the AI speaker market is growing at a very fast pace. However, AI speakers always wait for the user's voice, which can cause serious problems such as eavesdropping and personal information exposure if exposed to security threats. Therefore, in order to provide overall improved security of all AI speakers, it is necessary to identify potential security threats and analyze them systematically. In this paper, security threat modeling is performed by selecting four products with high market share. Data Flow Diagram, STRIDE and LINDDUN Threat modeling was used to derive a systematic and objective checklist for vulnerability checks. Finally, we proposed a method to improve the security of AI speaker by comparing the vulnerability analysis results and the vulnerability of each product.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.4
• /
• pp.15-25
• /
• 2012

The research on the FPGA CAD tools in academia has been lacking practicality due to the underlying FPGA fabric architecture which is too simple and inefficient to be applied for commercial FPGAs. Recently, the database of placement positions and routing graphs on commercial FPGA architectures has been built, and provided for enabling the academic development of placement and routing tools. To extend the limit of academic CAD tools even further, we have developed the evaluation toolkit for the K-FPGA architecture which is under development. By providing interface for exchanging data with a commercial FPGA toolkit at every step of mapping, packing, placement and routing in the tool chain, the toolkit enables individual tools to be developed without waiting for the results of the preceding step, and with no dependency on the quality of the results, and compared in detail with commercial tools at any step. Also, the fabric primitive library is developed by extracting the prototype from a reporting file of a commercial FPGA, restructuring it, and modeling the behavior of basic gates. This library can be used as the benchmarking target, and a reference design for new FPGA architectures. Since the architecture is described in a standard HDL which is familiar with hardware designers, and read in the tools rather than hard coded, the tools are "data-driven", and tolerable with the architectural changes due to the design space exploration. The experiments confirm that the developed library is correct, and the functional correctness of applications implemented on the FPGA fabric can be validated by simulation. The placement and routing tools are under development. The completion of the toolkit will enable the development of practical FPGA architectures which, in return, will synergically animate the research on optimization CAD tools.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.3 s.62
• /
• pp.503-515
• /
• 1998

In order to investigate the factors influencing QOL and life satisfaction of the physically disabled, the author interviewed, by using structuralized questionnaire, 440 individuals among the physically disabled who were participated in Health Examination from April to July, 1997. The questionnaire consisted of the general characteristics(sex, age, marital status, family number, etc), the Reintegration to Normal Living Index(RNLI) to assess QOL, and the single item of five-likert scale to evaluate life satifaction. The means of RNLI were $16.2{\pm}4.8$ in total score, $12.2{\pm}3.4$ in daily functioning and $4.0{\pm}2.1$ in perception of self. The respondents were less reintegrated toward social activities and relationships than impairments or disabilities. While the satisfied group was 47.3%, the dissatisfied group was 52.7%. As the results of multiple regression and logistic regression analysis, the significant predictors of QOL were age, education, job, grade of disability and subjective health status. The life satisfaction were related to economic status, job and subjective health status. To improve QOL and life satisfaction of the physically disabled, it is important that we improve their basic socioeconomic status by getting a job through rehabilitation education and induce them to have positive self-assessment by extending the opportunity of social participation.