Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.163-163
/
2011
셀레늄(Selenium: Se) cracker cell을 이용하여 셀렌화한 $CuInSe_2$ (CIS)박막에 대해 연구한 결과를 발표하고자 한다. 화석연료의 과도한 사용으로 지구온난화라는 환경문제가 대두되면서 영구적이고 무상의 태양에너지 이용에 대한 필요성이 점차 높아지고 있다. 빛에너지를 전기에너지로 변화시키기 위한 태양전지는 재료에 따라 다양하게 개발되고 있으며 그 중 가장 주목을 받고 있는 것 중의 하나가 $CuInSe_2$을 광흡수층으로 하는 CIS 박막 태양전지이다. CIS 박막은 태양전지의 광흡수층으로 사용되는데 직접천이형 밴드구조를 가지고 있고, 약 $10^5$$cm^{-1}$의 높은 광흡수계수를 가지고 있어 태양전지 광흡수층으로 적합한 물질로 각광받고 있다. CIS는 에너지 밴드갭이 ~1 eV로 실리콘과 유사한 밴드갭을 가지고 있으나 이는 Ga, Al을 In 대신 치환함으로 조절할 할 수 있다. 무엇보다도 sodalime 유리와 같은 저가의 기판위에 스퍼터와 같은 장치로 대면적 CIS 박막태양전지를 만들 수 있다는 것이 산업적인 면에서 장점으로 알려져 있다. 본 연구에서는 sodalime 유리기판 위에 스퍼터 방법으로 CIS 박막을 증착하고 Se cracker cell로 셀렌화하여 CIS 박막을 제조하는 것을 조사연구 하였다. 스퍼터를 이용하여 유리기판위에 Mo (Molybdenum)을 증착하고 그 위에 Cu-In-Se박막을 증착하였다. Cu-In-Se/Mo/유리기판 시료는 동일 챔버에서 Se cracker cell을 이용하여 셀렌화 처리 하였다. 물성비교를 위하여 Knudson-cell을 이용한 셀렌화도 시행하였다. Se cracker cell은 고체 Se를 가열하는 부분(R-zone)과 Se flux를 cracking 하는 부분(C-zone)으로 나누어져 있으며 C-zone은 700$^{\circ}C$로 고정하였다. 셀렌화 기판 온도는 425$^{\circ}C$로 고정하였고 Se cracker 온도는 330~375$^{\circ}C$까지 변화시켜 가며 CIS 박막을 제조하였다. 제조된 CIS 박막의 물성 조사는 사진, 현미경, SEM, EDX, XRD, Hall effects를 이용하였다. Se cracker cell로 셀렌화한 CIS 박막은 island 구조를 하고 있음을 알 수 있었다. CIS 박막의 island의 크기와 모양은 셀렌화시 R-zone 온도(Cu-In-Se 박막에 조사되는 셀레늄의 량)에 큰 영향을 받았다. 셀렌화시 셀레늄량이 적을 때는 island가 커지며 불균일해지고 셀레늄량이 많을 때 island가 작고 균일해지는 경향을 SEM을 통해 관찰할 수 있었다. X-ray 회절을 통해 셀레늄량이 적을 경우 CIS 결정이외의 결정이 박막내에 형성됨을 알 수 있었다. 학술회의에서 Se cracker cell을 이용한 셀렌화에 관한 보다 깊은 연구결과를 발표하고자 한다.
The Journal of Korean Institute of Communications and Information Sciences
/
v.28
no.1A
/
pp.25-33
/
2003
We derive the outage probabilities for the Erlang capacity and link margin based on handoffs in the reverse link of a CDMA system of 14.4 kbps/1.9 GHz band, calculate them with the same parameters, and then with the maximum realizable Erlang capacity analyze newly the cell coverage in different areas by the COST-231 model If it decreases from 5 % to 2 % in case of $E_b/N_0$=5 dB under a soft handoff, the result shows a very reliable link with additional increment of 0.88 dB in the margin and a high quality of service within the coverage decrease of 0.12 km, 0.25 km, and 1 km in a city, suburban, and open areas respectively on the decrease of 2 Erlang in the capacity. When the $E_b/N_0$ decreases from 7 dB to 5 dB within the outage probability of 5 %, it shows the increase of 9 Erlang and of 0.2 km in a city on the same margin of 2.8 dB. Then, comparing it with a single cell, it shows the decrease of more than 10 Erlang in the capacity, but the enlargement of 0.17 km, 0.3 km, and 1 km in them on the margin decrease of 1.31 dB, also, with a hard handoff, the soft handoff gain of the increase of 10 Erlang and of 0.22 km, 0.5 km, and 2 km on the decrease of 2.16 dB.
This study was conducted to determine effects of different supplementation periods (2, 3 and 4 months) of spent composts of Se-enriched mushrooms (Se-SMC) on plasma glutathione peroxidase (GSH-Px) activity and selenium deposition of finishing Hanwoo steers for the optimal supplementing period determination in order to produce Se-fortified Hanwoo beef. In the present study, 30 Hanwoo steers were allotted to treatments in six groups of five steers per pen. Treatments were separated into control and Se-SMC for each supplementation period. Dietary selenium contents were 0.1 and 0.9 ppm for control and Se-SMC treatments, respectively. At the end of each supplementation period, steers by periods were slaughtered to collect hind leg and liver samples for their selenium analyses. Blood samples were taken to analyze whole blood Se concentration and plasma GSH-Px activity at the last day of each supplementation period. Dry matter intakes were unaffected by Se-SMC and supplementation periods. In addition, average daily gain was not different between control and Se-SMC treatments and among supplementation periods. There was no difference for total body weight gain between control and Se-SMC treatments within each supplementation period. The supplementation of Se-SMC significantly (P<0.001) increased whole blood Se concentration, but whole blood selenium concentration was not affected by the supplementation period. Furthermore, plasma GSH-Px activity showed similar trend as shown in the pattern of whole blood Se concentration, but no difference by supplementation periods was observed. Selenium contents in hind legs significantly (P<0.05) increased with increasing supplementation periods, and also they were significantly (P<0.001) higher for Se-SMC supplementation groups in comparison to controls. However, there was no difference for selenium contents of hind legs between three and four months supplementation. Selenium contents in livers tended to slightly increase with increasing supplementation periods with no significant difference, but they were significantly (P<0.01) higher for Se-SMC supplementation groups compared with controls within the same period. The results indicated that the optimal Se-SMC supplementation period for the selenium deposition in Hanwoo steers might be around two or three months when we considered selenium contents in hind legs and livers.
To compare the microstructure and electrochemical properties between two binary alloys (Cr-Si, Ni-Si), two composition of binary alloys with the same capacity were selected using phase-diagram and prepared by matrix-stabilization method to suppress the volume expansion of Si by inactive-matrix. Master alloys were made by Arc-melting followed by fine structured ribbon sample preparation by Rapid Solidification Process (RSP, Melt-spinning method) under the same conditions. Also powder samples were produced by wet grinding for X-Ray Diffraction (XRD) and electrochemical measurements. As predicted from the phase diagram, only active-Si and inactive-matrix ($CrSi_2$, $NiSi_2$) were detected. The results of Scanning Electron Microscope (SEM) and Transmission Electron Microscopy - Energy Dispersive X-ray Spectroscopy (TEM-EDS) show that Cr-Si alloy has finer microstructure than Ni-Si alloy, which was also predictable through phase diagram. The electrochemical properties related to microstructure were evaluated by coin type full- and half-cells. Separately, self-designed test-cells were used to measure the volume expansion of Si during reaction. Volume expansion of Cr-Si alloy electrode with finer microstructure was suppressed significantly and improved in cycle capability, in comparison Ni-Si alloy with coarse microstructure. From these, we could infer the correlation of microstructure, volume expansion and electrochemical degradation and these properties might be predicted by phase diagram.
This paper proposes the new structural MOQ(Multiple Input/Output-Queued) switch which guarantees QoS while maintaining high efficiency and deals with the Anti-Empty algorithm which is new arbitration algorithm to be used for the proposed switch. The new structure of the proposed switch based on MIQ, MOQ is designed to have the same buffer speed as the external line speed. Also, the proposed switch makes it possible to remove the weak point of existing methods and introduces the new method of the MOQ operation to support QoS. Therefore, this switch is equal to the Output Queued switch in efficiency and delay, and guarantees the high-speed switching supporting QoS without cell loss.
Single and mixed particle suspensions of kaolin, bentonite, starch and PMMA were carried out using a dead-end Amicon fi1tration cell with microfilteration membranes. The experimental data of permeate fluxes were fitted by the constant pressure fi1tration models in order to investigate fouling steps. In 0.1 wt% mixed solution of equal amount of kaolin and starch, the permeation flux was about 30% lower than the average of each particle flux. However, the permeation flux for kaolin/PMMA mixed solution was about 10% higher than the average of each particle flux. In the cases of bentonite and PMMA or starch mired solution, the improvement effect on permeation flux was weaken than that of kaolin mixed solution. Also, the membrane fouling resistance for mixed particle solution of equal amount of kaolin and starch was minimum at 0.05 wt% particle concentration.
Journal of the Society of Cosmetic Scientists of Korea
/
v.48
no.4
/
pp.365-372
/
2022
Cellobiose is a dissacharide constituted by two glucose units joined by a β-('1,4') glycosidic bond that is produced by the decomposition of cellulose. This product exists naturally in plants and has been utilized in different industries as a food sweetener, and as a cosmetic and pharmaceutical material. In this study, the potential of cellobiose as a whitening cosmetic product was evaluated by analyzing autophagy induction and the inhibition of melanin production. A cytotoxicity test conducted in the human melanin-producing cell line MNT-1 with increasing concentrations of cellobiose revealed that this compound did not cause cytotoxicity at 20 mg/mL or less. Based on this, autophagy was firstly evaluated by immunostaining with the autophagy marker microtubule-associated protein 1 light chain 3 (LC3) after treatment with 20 mg/mL of cellobiose. The subsequent confocal microscopy analysis revealed an increase in LC3 puncta, indicating induction of autophagy. In addition, autophagy was further confirmed by western blot analysis, which demonstrated that cellobiose converted LC3-I to LC3- ∏ in a concentration- and time-dependent manners. An analysis of melanin contents after cellobiose treatment at a concentration of 20 mg/mL during 7 days revealed that melanin production was reduced by more than 50%. Additionally, the expression levels of melanogenesis-related proteins TYR and TYRP1 were markedly decreased after cellobiose treatment. Based on these studies, a cosmetic cream formulation containing cellobiose was prepared and the change in formulation was tested for 4 weeks, and it was confirmed that the appearance changed to liquid form at high temperature, but the pH did not change. In conclusion, the present research demonstrated that cellobiose activates autophagy and inhibits melanin production, and showed the potential of this product as a material for whitening cosmetics.
Kim, June-Hyong;Nam, Sung-Soo;Cho, Tae-Joon;Lee, Hong-Min
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.20
no.2
/
pp.147-153
/
2009
In this paper, FSS(Frequency Selective Surface) using defect mode characteristic is proposed. The unit cell using defect mode characteristic of the proposed FSS is offered lower resonant frequency in the same cell size. The number of suitable array is optimized 13 by 13. Also, the patch antennas operated in WCDMA(Wideband Code Division Multiple Access) Tx band and Rx band are designed for the comparison. The gain value of proposed FSS-1 complex structure (the patch antenna of Tx band and FSS) is improved 3.3 dB from 9.98 dBi to 13.28 dBi in Tx band. The gain value of proposed FSS-2 complex structure(the patch antenna of Rx band and FSS) is improved 5.53 dB from 9.81 dBi to 15.34 dBi in Rx band. Also the measured impedance bandwidth($VSWR{\leq}2$) of manufactured $13{\times}13$ array antenna is from 337 MHz(1.87 to 2.21 GHz). The measured radiation gain is 11.39 dBi(1.94 GHz), 13.11 dBi(2.05 GHz), 11.09 dBi(2.14 GHz). The measured radiation efficiency is 81 %. Because the proposed FSS structure has more higher gain, it will be applied to antenna of WCDMA repeater system.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.10
no.3
/
pp.199-205
/
2017
In a small cell base station used in densely populated areas, a dual polarized multiple antenna(MIMO) is mainly used to increase the cell capacity. This paper demonstrates a dual-polarization antenna with high cross-polarization discrimination(XPD) that can improve the capacity of a small cell using a dual polarization multiple antenna (MIMO). By using the symmetric structure and differential feeding, high XPD in all directions is achieved. In addition, a very similar radiation pattern is observed between each polarization. Because of high XPD and similar radiation pattern in all directions, proposed antenna is well adopted for small-cell multiple-input multiple-output(MIMO) system. Experimental results shows that the proposed antenna has a bandwidth of 180 MHz (2.51~2.7 GHz), a maximum gain of 4.5 dBi (3.5~4.5 dBi), and a half-power beam width of 85 degrees. In addition, average XPD of 26.4 dB in all directions, more than 13.8 dB increase than previous dual-polarization antennas which use single emitter by using different feeding or selectively use polarization through switching.
The purpose of this study is to measure the volumetric water content of unsaturated soils during drying and wetting process by using volumetric pressure plate extractor (VPPE) incorporated with time domain reflectometry (TDR). The VPPE consists of a pressure cell, a pressure regulator, a burette system and a TDR probe. Two samples with different initial void ratios were prepared in the pressure cell, and the air pressure at the range of 0.1 kPa - 50 kPa was applied to adjust the matric suction by the pressure regulator. The burette system was used to measure the volumetric water content change of the sample according to the matric suction. In addition, the TDR probe, installed in the cell, was used to evaluate the dielectric constant from the reflected signal of the electromagnetic wave at the probe. The volumetric water content of specimen was estimated by the empirical equation between the volumetric water content and dielectric constant, which was calibrated with the Jumunjin sand. The test results show that the volumetric water content calculated by TDR probe is strongly correlated to the measured value by burette system. The hysteresis occurs during drying and wetting process. Furthermore, the degree of hysteresis reduces in the repeated process. This study suggests that TDR may be effectively used to evaluate the water content soil for the determination of water characteristic curve of unsaturated soils.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.