• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.101-105
• /
• 2002

FRP(Fiber glass reinforced plastics) is compound with materials, which are created to combine each other materials, of which nature of mechanical and chemical are different. Even though the weight and the thickness are identic, its physical figure of characteristic changes with consisting of lay-up and work situation. It is also a method of creating after manufacturing of mould. It has feature that manufacturing of FRP runs parallel design of material with design of structure simultaneously. The rule of FRP structure is distinguished from the length of a ship and it is hard to catch the feature of structure mechanics due to identical formula and figure used for it regardless of the shape of a ship or the speed. This studying, basing on a small FRP ship, will show te fundamental data needed to design of structure analysing the feature of intensity with direction, the method of Lay-up, and the characteristic of materials of FRP.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.934-938
• /
• 1995

Water soluble fractions (WSF) of wheat bran treated with thermal processes such as autoclaving, microwaving and extrusion were characterized to investigate the structural response of plant cell wall to thermal and mechanical energy. From the chemical analysis and gel filtration chromatography of WSF, gelatinization of starch was found to be the primary solubilizing mechanism of wheat bran, followed by the structural disintegration of fibrous non-starch cell wall materials. It was also found that extrusion process resulted in degrading relatively higher molecular weight non-starch polysaccharides from the cell wall. GC analysis of water soluble non-starch polysaccharides indicates that the arabinoxylan residues of cell wall are the most susceptible site to thermal treatments studied. In particular, the degrading degree of cell wall of wheat bran is the most significant for extrusion accompanying both high temperature and high shear.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.8-15
• /
• 2000

In this paper, we realize the active PFC(Power Factor Correction) system of BF(Boost Forward) converter with PWM-PFM(Pulse Width Modulation-Pulse Frequency Modulation) control technique to control DC output voltage, to remove the noise like harmonics at output voltage, and to control the input current with sinusoidal wave synchronized by the source voltage.To achieve the desired load voltage and improved PFC, we first implement current shaping control at the inverting stage and make the converted output DC voltage with forward converter. After making the ratio of output voltage to current as 50V/1A and the duty ratio greater than 0.5. When input voltage is 30V and boost inductance is 1.1mH. we control the voltage changing rate according to the variation of load resistance using a PWM-PFM control technique. And finally we prove experimentally, we attenuated its harmonics and improved PF up to 0.96 using the current shaping technique.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.230-236
• /
• 2014

This study was carried out to investigate the manufacturability of artificial lightweight aggregate as a way to recycle basalt powder sludge, which is a waste produced during the manufacturing process of basalt in Jeju. Powdered waste glasses and calcium carbonate are used to improve the characteristics of manufactured artificial lightweight aggregate. Especially, considering the complex factors of basalt powder sludge, powdered waste glasses, and sintering method, the amount of calcium carbonate is appropriate at the 9 wt.% in order to improve the intumescent of lightweight aggregate. Also, the amount of powdered waste glasses is effective with using less than 50 wt.% and applying the direct sintering method at the same time on decreasing the absorption of lightweight aggregate. Furthermore, in order to manufacture artificial lightweight aggregate of high quality with a low specific gravity and low water absorption, it is considered to be more effective to apply the direct sintering method after the surface of artificial lightweight aggregate is covered with powdered waste glasses.

• The Korean Journal of Pain
• /
• v.20 no.2
• /
• pp.213-218
• /
• 2007

Percutaneous vertebroplasty and balloon kyphoplasty have been accepted as effective treatment modalities for vertebral compression fractures in patients with vertebral metastasis. However, when these procedures are conducted in patients with lytic lesions of the vertebral pedicle, polymethylmethacrylate leakage through the lytic lesions that occurs during percutaneous pediculoplasty can increase the procedural risks due to the immediate vicinity of neural structures. In spite of this risk, there are not many available reports on safer methods of pediculoplasty. Here we report a case of vertebral metastasis in which the pedicle infiltration of cancer was successfully treated by pediculoplasty using a bone filler device that contained thick bone cement during a balloon kyphoplasty procedure.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.393-399
• /
• 1995

Mandibular retrusion showing the facial problem with a marked maxillarry incisors protrusion and chin deficiency, resulting in a highly convex profile is uncommon in Korea.. The large incisor overjet and deep-bite create functional limitations and unpleasing esthetic result. The majority of theses cases are susceptible to correction by orthodontic therapeutic methods. But severe Class II retrognathic cases in which orthodontic treatment alone has not been capable of achieving good results. Orthognathic surgery offers several approaches. In this case, mandibular advancement by bilateral sagittal split ramus osteotomy and augmentation genioplasty has a special surgical problems. The suprahyoid muscle gorup are lengthened if the body of the mandible is surgically repositioned anteriorly. Instability of results and relapse return to original position shoud predicted during post-surgical muscular readjustment.. To maintain maximum correction with this technique, it is suggested that the mandibular body be well rotated forward at time of surgical intervention and overcorrected anteriory as much as possible. So, the authors report the case with review of concerned literature.

• Korean Journal of Head & Neck Oncology
• /
• v.38 no.1
• /
• pp.53-57
• /
• 2022

Reconstruction of subtotal maxillectomy defects with columella deficit is challenging. We report a unique case of facial reconstruction using a free radial forearm flap and a free preauricular flap for the maxillectomy and columella deficit. A 73-year-old woman was diagnosed with recurrent sebaceous carcinoma of the nose. We performed wide excision, including areas of the right cheek, nose, upper lip, maxilla, and columella. The resultant subtotal maxillectomy defect was reconstructed using a three-dimensional flap. First, a free radial forearm flap was transfered to resurface the nasal, oral, and external facial side. Second, a preauricular flap was positioned into the columella defect and anastomosed with the distal portion of the radial forearm flap pedicle. The two flaps survived, and the patient recovered uneventfully. We believe the radial forearm and preauricular double free flaps with the pedicle connection method were effective in reconstructing the present case of subtotal maxillectomy defect.

• Korean Journal of Social Welfare Studies
• /
• v.42 no.1
• /
• pp.55-82
• /
• 2011

This study is a descriptive correlational study to investigate the impact of ethical climate type on career commitment of 155 social worker working at 9 social welfare facility. A self-reported questionnaire used to collect data and collected data was analyzed on SPSS WIN 16.0. The higher mean sore of ethical climate was Low & professional code and Social responsibility. The predictors of career commitment of social worker were low-professional code, efficiency and self-interest of ethical climate type. The strategies to promote and enhance the low - professional code and efficiency ethical climate of social welfare facility were needed to design and be integrated into the management of human career development of social worker

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.111.1-111.1
• /
• 2010

석탄가스화복합발전(IGCC: Integrated Gasification Combined Cycle)의 고온 고압 합성가스로부터 $CO_2$를 저비용으로 포집하기 위한 연소전 포집 기술 중 유동층 촉진수성가스전환(SEWGS) 공정이 제안되어 연구개발 중에 있다. 연소전 $CO_2$ 포집을 위한 SEWGS 공정은 동일한 2탑 순환 유동층 반응기에서 고온 고압의 합성가스($H_2$, CO)를 유동층 WGS 촉매를 사용하여 CO를 $CO_2$로 전환하는 동시에 전환반응으로 생성된 $CO_2$를 흡수제를 이용하여 포집하는 기술이다. 본 연구는 $CO_2$ 회수와 WGS 반응이 동시에 이루어지는 공정에 적용 가능한 건식 재생 흡수제 및 유동층 WGS 촉매 개발을 목표로 $CO_2$ 흡수제(P Series) 및 WGS 촉매(PC Series) 조성을 제안하고 분무건조기를 이용하여 6~8kg/batch로 성형 제조하였다. 제조된 $CO_2$ 흡수제 및 촉매의 특성 평가 결과 내마모도(Attrition resistance)를 포함한 물리적 특성이 유동층 공정의 요구조건을 만족하는 결과를 얻을 수 있었다. 또한, 모사 석탄 합성가스를 이용하여 20bar, $200^{\circ}C$ 흡수/$400^{\circ}C$ 재생 조건에서 열중량 분석기(TGA) 및 가압 유동층(Fluidized-bed) 반응기를 통한 흡수제의 $CO_2$ 흡수능 평가를 수행하였다. 그 결과 내마모도(AI) 3% 이하로 기계적 강도가 우수하며, $CO_2$ 흡수능 17.6 wt%(TGA) 및 11wt%(가압 유동층)를 나타냈다. 유동층 WGS 특성 평가 결과 내마모도가 7~35%로 우수하였고, CO 전환율은 $200^{\circ}C$에서 80% 이상으로, 유동층 SEWGS 공정에 적용 가능한 특성을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.119-128
• /
• 2010

The hygrothermal effect on the strength of composite single-lap bonded joints were investigated. The specimens were manufactured in four different manufacturing methods and tested in three different environmental conditions. An interesting result is that the strengths of the joints in the elevated temperature and wet (ETW) conditions were found to be 11 ~ 23% higher than those in the room temperature and dry (RTD) environment. In contrast, the strengths of the joints in the cold temperature and dry (CTD) condition decrease by 8 ~ 21% compared to those in the RTD environment except for cobonded joint. The difference in the strength by testing environments is mainly attributed to the change of the material properties of adhesive by temperature and moisture.