• The Korean Journal of Applied Statistics
• /
• v.31 no.6
• /
• pp.811-823
• /
• 2018

Multivariate control chart based on Hotelling's $T^2$ statistic is a powerful tool in statistical process control for identifying an out-of-control process. It is used to monitor multiple process characteristics simultaneously. Detection of the out-of-control signal with the $T^2$ chart indicates mean vector shifts. However, these multivariate signals make it difficult to interpret the cause of the out-of-control signal. In this paper, we review methods of signal interpretation based on the Mason, Young, and Tracy (MYT) decomposition of the $T^2$ statistic. We also provide an example on how to implement it using R software and demonstrate simulation studies for comparing the performance of these methods.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.193-199
• /
• 2018

The commonly used delivery system for online merchandise has potential problems, not only missing but also criminal case. Also, the contemporary Kiosk type approach for delivery system has some problems in an initial installation cost, expense of management system and especially security weaknesses in the wireless communication. To resolve these issues, this paper is proposing a securely unmaned smart locker system that can handle up to 64 parcels. This is easily controlled and monitored by a smartphone. In addition to the system, an algorithm is proposed to make the security of wireless communications better. Finally, a method is proposed to minimize the cost of delivery by using centralized server.

• The Korean Journal of Applied Statistics
• /
• v.22 no.2
• /
• pp.365-373
• /
• 2009

Since 1990, identifying the sex of fetus and illegal abortion has brought the sex ratio imbalance at birth in Korea due to a notion of preferring a son to a daughter, socio-economic development, population policy, and so forth. Although there have been many researches such as time series analysis and region difference analysis to monitor this sex ratio imbalance, they have a defect that time and space could not be included in the analysis simultaneously. This study analyzes the sex ratio imbalance at birth, taking into account time and region at the same time. The analysis considered the numbers of male and female babies, who were born as the third or latter in their families, in 2000 and 2001 at 234 Gu / Si / Goon administrative districts. Here, we suggest a mixture model of binomial distributions, assuming heterogeneous populations. The estimation of the location parameters, weights and correlation coefficient of the mixture model is conducted by the EM algorithm, and the heterogeneity of the regions is expressed as a picture using ArcView GIS.

• Smart Media Journal
• /
• v.6 no.4
• /
• pp.65-71
• /
• 2017

In this paper, we propose a design method for the construction of LTE-based small unmanned aerial vehicle control system to quickly and reliably collect multiple small unmanned aerial vehicle position information simultaneously flying all over the country. In particular, the main requirements are the network (N/W), hardware (H/ W), software(SW), Database(DB), development architecture, and business needs. To satisfy these requirements, N/W, H/W, SW, DB design, and architectural design plan were suggested regarding the design requirements of a small UAV system. To effectively control the small unmanned multi-party system in the system design, the architecture is divided into the front-end service area and the back-end service area according to the function and role of the unit system. In the front-end service area that grasps and controls the position and state of small unmanned aerial vehicles (UAVs), we have studied the design part that can be expanded to N through TCP/IP network by applying Client PC method.

• KIISE Transactions on Computing Practices
• /
• v.22 no.4
• /
• pp.195-200
• /
• 2016

With development of wearable devices, there is an increased interest in bio-signal monitoring techniques that can measure the user's health condition. However, embedding several bio-signal sensors in one wearable device has some inherent problems in terms of limited resources such as its size. Furthermore, such problem also arise when new bio-signal sensors are added. In this paper, we introduced the Bio-Cradle, which is a Plug-in module that can transfer the biological signals in real time from the accelerometer, ECG, or PPG sensor to other wearable devices at the request from the user of wearable devices. When the Bio-Cradle plugged in to the other device, it can transfer several synchronized bio-signals regardless of the type of device.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.474-480
• /
• 2017

In this study, the evolution of electrical impedance of electric nodes was investigated to determine the setting time of cement paste using the electrical impedance spectroscopy method. The electric nodes were embedded in fresh cement paste and the electrical impedance signatures were continuously monitored. Vicat needle test and semi-adiabatic calorimetry test were also conducted to validate the electrical impedance spectroscopy method. During hydration period of cement paste, the magnitude of conductance gradually increased, and then started to decrease rapidly at a first certain time. After that, the magnitude of conductance gradually decreased at a second certain time. The times of turning point in the curves of magnitude of conductance seem to be related with the setting time by Vicat needle test. Also, the setting times by the electrical impedance spectroscopy method are well posed within the setting period estimated by the semi-adiabatic calorimetry test. Based on the results, it can be concluded that the setting time of cement paste can be effectively monitored through the electrical impedance spectroscopy method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.44-50
• /
• 2001

The largest problem in applying the elecbical partial discharge measurement method the transformer that has been operated until now is the removal of external corona noise In this thesis, a methcd was studied. to rneasme only fue partial discharge sIgnal due to the defoct in transfonrer except the external corona noise. To find out the types of partial discharge and corona noise within a transfomr, a partial discharge was made in use of a needle-plane electrodes within a model transfonner and, at the same time, an external corona noise was generated in use of a rod-sphere electrcdes in the air around the transformer. Both of a partial clischarge signal caused from an intemat defect within a transformer and an external noise were found at the rogowski coil which was located at transformer earth wire. When the external corona noise, which was separately measured in use of an antenna sensor out of transfonner, was removed from the signal measured on rogowski coil, the signal caused by partial discharge within a transformer would effectively be acquired.quired.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.50-57
• /
• 2004

For the application of structural health monitoring such as AE detection, a stabilized FBG sensor system with wide dynamic range was proposed. A tunable Fabry-Perot filter with narrow free spectral range(FSR) was used to simplify the multiplexing demodulator for FBG vibration sensors. Stabilization controlling system was also developed for the maintenance of maximum sensitivity of the sensors. In order to verify the performance of the proposed FBG vibration sensor system, we measured sensitivity, and the system showed the average sensitivity of 256 $n{\in}_{mas}/{\sqrt{Hz}}$. Finally, multi-points vibration tests using in-line FBG sensors were conducted to validate the multiplexing performance of the FBG system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.535-544
• /
• 2017

In this paper, to overcome the limitation of information transmission and reception according to the RF system of UAV, it is necessary to check the position of many UAVs in flight on the basis of mobile communication and to make the LTE modem lightweight and low power And UAVs that are in operation are received and controlled. Through this study, we proposed a method to control real-time location tracking by connecting high-resolution images to the network anytime and anywhere. For this purpose, we propose the requirements and requirements of LTE modem using real-time high-speed data communication technology (3G, 4G LTE, Bluetooth) by presenting the communication module system of LTE-based UAV. N:N control system concept and implementation technology(Control system structure, control data flow chart, flight planning and transmission, real-time location tracking).

• Geophysics and Geophysical Exploration
• /
• v.22 no.2
• /
• pp.72-79
• /
• 2019

Underwater object detection method adopting electrical resistivity technique was proposed recently, and the need of advanced data processing algorithm development counteracting various marine environmental conditions was required. In this paper, we present an improved water tank experiment system and its operation results, which can provide efficient test and verification. The main features of the system are as follows: 1) All the processes enabling real time process for not only simultaneous gathering of object images but also the electrical field measurement and visualization are carried out at 5 Hz refresh rates. 2) Data acquisition and processing for two detection lines are performed in real time to distinguish the moving direction of a target object. 3) Playback and retest functions for the saved data are equipped. 4) Through the monitoring screen, the movement of the target object and the measurement status of two detection lines can be intuitively identified. We confirmed that the enhanced physical modeling system works properly and facilitates efficient experiments.