• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.370-374
• /
• 2009

A double-layer optical sensing membrane has been fabricated to measure the concentration of dissolved oxygen (DO) and pH value simultaneously. (tris(4,7-diphenyl-1,10-phenanthroline (Rudpp) ruthenium(II)) as a DO sensitive dye has been mixed in the methyl trimethoxy silane (MTMS) sol-gel solution and coated onto one well in a 24-well microtiter plate. On the DO-sensing layer the GA (3-glycidoxypropyl trimethoxy silane (GPTMS), 3-aminopropyl trimethoxy silane (APTMS)) sol-gel solution mixed with 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS) has been coated and used to measure pH values. The double-layer sensing membrane was affected by ionic strength and temperature. The double-layer sensing membrane for DO and pH has been applied to online monitor in microorganism cultivation processes and showed a good performance.

• Composites Research
• /
• v.16 no.3
• /
• pp.58-67
• /
• 2003

To perform the realtime strain and fracture monitoring of the smart composite structures, two optical fiber sensor systems are proposed. The two types of the coherent sources were used for fracture signal detection - EDFA with FBG and EDFA with Fabry-Perot filter. These sources were coupled to EFPI sensors imbedded in composite specimens. To understand the characteristics of matrix crack signals, at first, we performed tensile tests using surface attached PZT sensors by changing the thickness and width of the specimens. This paper describes the implementation of time-frequency analysis such as short time Fourier transform (STFT) and wavelet transform (WT) for the quantitative evaluation of fracture signals. The experimental result shows the distinctive signal features in frequency domain due to the different specimen shapes. And, from the test of tensile load monitoring using optical fiber sensor systems, measured strain agreed with the value of electric strain gage and the fracture detection system could detect the moment of damage with high sensitivity to recognize the onset of micro-crack fracture signal.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.572-578
• /
• 2010

The extraction/clean-up and concentrating of pharmaceuticals from surface water were performed by HLB (Hydrophilic-Lipophilic Balanced) cartridge. The method allows for the simultaneous determination of six pharmaceuticals by HPLC/ESI(+)-MS/MS. Recoveries of the pharmaceutical were between 71.1 to 92.6% (except fenbendazole) and the overall variability of the method was below 11.2% (RSD). The calibration curves for the pharmaceuticals from blank surface water showed good linearities (above $r^2$ = 0.99) in the concentration range of 0.007~1.2 ng/mL. The limit of detection (LOD) and the limit of quantification (LOQ) were 7.2~128.7 pg/mL and 23.8~429.1 pg/mL, respectively. The present analytical method can be useful for monitoring residual pharmaceuticals in surface water and other aquatic samples. High concentrations of iopromide and fenbendazole were detected in a few samples of surface water.

• Korean Journal of Ornithology
• /
• v.25 no.2
• /
• pp.126-132
• /
• 2018

For balanced development of ornithological research in Korea, it is important to review what birds and what research topics have been studied so far. We quantitatively investigated the trends of domestic ornithological research using text-mining and co-word analysis. As a result of studying 372 articles published in the Korean Journal of Ornithology, which is the most representative ornithological journals, words related to research topics such as population and community monitoring, first record of species and breeding ecology, and heavy metal pollution in birds have been widely used in research articles. Except for subjects such as monitoring and first record of species, studies have not been conducted widely. It was also found that research were concentrated on specific birds such as Anas platyrhynchos, Calidris alpina, and Anas poecilorhyncha. The present study, which analyzed the research topics and avian taxa that were relatively active until now and those which were insufficient, suggests what we should do in the future for the balanced development of ornithological research in Korea.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.1
• /
• pp.19-25
• /
• 2019

In this present study, to evaluate the applicability of the monitoring system of the entire reservoir dam facility using the wireless sensor network system and a section representative of the domestic reservoir dam was selected as the test bed site and to operated a system that can evaluate the condition of the facility at the real time with monitoring. In order to set up a wireless sensor network system, the system assessment of present state was carried out for confirmation the risk factors and the limit values of the risk factors in limit state were calculated. The type and position of the sensor to be measured in the field were determined by setting the measurement items suitable for the hazardous area and the risk factor. In this paper, we evaluated the feasibility of the system by monitoring and constructing a wireless sensor network system in a field for a fill dam that can represent a domestic reservoir dam. Applicability evaluation was verified by comparing directly with the measurement of partial concentration method which is the measurement management technology of the dam.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.4
• /
• pp.263-269
• /
• 2013

In this study, the strain based monitoring method to evaluate the lateral structural response of buildings is presented and an applicability of the proposed method is confirmed through the numerical study. It is assumed that the fiber Bragg grating(FBG) strain sensor is employed to measure the strain response of members due to the excellent properties such as multiplexing, and higher sampling frequency. These properties of FBG sensors is proper for buildings the a lot of sensors are required to monitor the reponses of those. FBG sensors measure the strain response of vertical members and are employed to calculate the curvatures of members using the measured strain responses. Then the lateral displacement, and lateral acceleration is evaluated based on the curvatures of vertical members. Additionally, these dynamic responses of buildings are used to evaluate the dynamic properties of buildings such as the natural frequencies and mode shapes using the frequency domain decomposition(FDD) method. Through the application of nine-story steel moment frame example structure, it is confirmed that the proposed method is appropriate to evaluate the lateral structural responses and dynamic properties of buildings.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.115-119
• /
• 1997

본 논문은 해상에서 발생될 수 있는 기름 유출 사고시 효과적 방제의 지원을 위한 오염원 확산 예측 시스템의 개발을 주목적으로 한다. 이를 위하여, 격자형 공간 DEVS 모델 링 방법론을 이용한 SOS(Save Our Sea) 시스템을 개발하였다. 기존의 해양오염 예측 시스 템들이 대부분 해석적 기법에 의존하는데 비해 제안된 시스템은 격자형 공간 모델링을 이용 한 시뮬레이션 기법으로서 전체 해양을 Cell 단위의 공간으로 분할하고, Cellrks의 결합관계 는 Name-Directed Coupling을 적용함으로서 시스템 설계상의 효율성과 유연성을 제공한 다. 제안된 시스템은 기름유출사고의 발생시 오염원 확산에 영향을 주는 각종 벡터 변수값 들에 따른 해양 오염 물질의 확산 분포를 예측함과 동시에 확산에 영향을 주는 많은 벡터 값들이 모니터링 정보를 함께 제공함으로서 해양 오염 방제 및 환경 보존에 효과적으로 적 용될 수 있을 것으로 기대된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3161-3167
• /
• 2010

Hall sensors of BLDC(brushless DC) motor are used to detect a position information for a control mechanism, which implements an algorithm for velocity and position control. Actual azimuth and altitude were measured to evaluate a control precision. The measurement revealed comparatively good accuracy that the measured values were $2.02^{\circ}$ and $1.01^{\circ}$ respectively, and the maximum error falls within $1.86^{\circ}$. The developed monitoring system of photovoltaic generation plants is a LCU(Local Control Unit) based on an integrated monitoring system which supports 1:N method for multiple simultaneous connections, remote control and real-time system state monitoring.

• Journal of Internet of Things and Convergence
• /
• v.5 no.2
• /
• pp.73-79
• /
• 2019

Research is underway on services and systems that provide real-time alerts for suffocating gases and potentially explosive materials, but currently smart bend type services are lacking. This study supports real-time identification of explosion hazards due to static electricity in the workplace and immediate elimination of accident occurrence factors, real-time monitoring of worker status and workplace hazards (oxygen, hazardous chemical concentration), and immediate warning and data in case of danger. We propose a method of establishing an accident prevention system through analysis. In this way, various accidents that may occur in industrial sites are monitored using IoT-based intelligent sensor nodes, wireless network technology, data processing middleware, and integrated control system, and real-time risk information at the industrial sites is prevented and accidents are prevented. By supporting a safe working environment, the company can significantly reduce costs compared to post-procurement costs.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.145-152
• /
• 2017

In this paper, GNSS(global navigation satellite system) to monitoring the fine for the construction of structure displacement based on satellite communications signals of GNSS. At the same time on USN(ubiquitous sensor network) and proposed a new approach to precise positioning by analyzing the results. A major construction structure for the safety diagnosis and prevent disaster from the risk of collapse. Precision measurement methods to mm level GNSS in that case and experiments in the application of new technologies that can most commonly used to replace the current through the permanent. The way a GNSS baseline and tested it on to prove. As a result, at our country at precise positioning and fine displacement monitoring application virtual reference station(VRS) in a GNSS mm of a margin of error of horizontal and vertical directions can be found.