• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.638-641
• /
• 2018

현재 선진국에서는 고출력 양성자 선형 가속기를 기반으로 한 의료용 암치료기인 BNCT(Boron Neutron Capture Therapy)에 대해 활발히 연구 중이며 다원시스도 2016년부터 A-BNCT 사업을 진행 중이다. A-BNCT에 적용된 양성자 선형 가속기의 RF(Radio Frequency)전원을 공급하기 위해 352 MHz, 1.5 MW의 고출력을 가지는 클라이스트론을 사용하였다. 클라이스트론의 출력인 RF의 크기와 위상을 안정적으로 제어하기 위해 90 kV, 30 A, 120 Hz, 1.7 ms의 구형파 출력을 가지는 고전압 전원장치를 적용하였다. 또한 고전압 전원장치의 출력전압 변동률을 0.5% 이내로 유지시키기 위해 전압보상회로를 적용하여 회로 시뮬레이션과 실부하 실험을 통해 펄스전원장치의 성능을 검증하였다.

• The Korean Journal of Pharmacology
• /
• v.25 no.1
• /
• pp.1-11
• /
• 1989

In this study, it was aimed to investigate the role of serotonergic neurotransmission in nucleus tractus solitarius (NTS) for the central regulation of blood pressure and heart rate and its involvement in baroreceptor reflex activation in rats. A microinjection of 5-hydroxytryptamine (5-HT) into the NTS produced decreases in blood pressure and heart rate. Maximal decreases were $34.4{\pm}1.6$ mmHg and $41.7{\pm}10.2$ beats per min by 300 pmol of 5-HT. Microinjections of ${\alpha}-methylnor-adrenaline$ $({\alpha}-MNE)$ and clonidine manifested similar decreases in blood pressure and heart rate. The hypotensive and bradycardial effects of 5-HT were blocked by previous applications of 5-HT antagonists, ritanserin, methysergide and ketanserin into the NTS, respectively. By pretreatment with reserpine and 6-hydroxydopamine (6-OHDA, i.c.v.), both hypotensive and bradycardial effects of 5-HT were significantly attenuated. Pretreatment with 5, 7-dihydroxytryptamine (5,7-DHT, i.c.v.) enhanced the hypotensive and bradycardial effects of 5-HT. Similarly, following pretreatment with 6-OHDA, the effects of clonidine were increased. Pretreatment either with 5,7-DHT or 6-OHDA significantly attenuated the sensitivity of baroreflex produced either by phenylephrine or by sodium nitroprusside. When either 5,7-DHT or 6-OHDA was injected into the NTS $(5,7-DHT;\;8{\mu}g\;6-OHDA;\;10{\mu}g)$, both of the baroreflex sensitivities were impaired. In the immunohistochemical study, the injection of 6-OHDA into the the NTS led to reduction of axon terminal varicosity, however, the injection did not reduce the numbers of catecholaminergic cell bodies. Likewise, when 5,7-DHT was injected into the NTS, the varicosity of serotonergic axon terminals was markedly reduced. Based on these results, it is suggested that (1) stimulation of serotonergic receptors in the NTS leads to decreases in blood pressure and heart rate as observed with the stimulation of catecholaminergic system, (2) both serotonergic and catecholaminergic receptors may be located postsynaptically, and (3) the serotonergic neurons as well as catecholaminergic neurons may have a close relevance for the activation of baroreflex.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.132-134
• /
• 2013

포항가속기 연구소에서 4세대 전자를 가속시키기 위하여 RF 공급원으로 사용하는 펄스 모듈레이터의 고전압 안정도는 100ppm 이하의 고전압이 요구된다. 따라서 본 연구소에서 산업체와 연계하여 인버터를 적용한 고정밀 고전압 CCPS를 개발하였다. 개발된 고정밀 고전압 CCPS의 사양은 50 kV, 5 kJ/sec, 100 ppm 이하 1set와 50 kV, 30 kJ/sec, 1000 ppm 4set이다. 고정밀 고전압 CCPS를 시험하기 위하여 4세대용 200 MW 모듈레이터를 설치하여 시험하였다. 본 논문에서는 고정밀 고전압 CCPS의 개발하고 제작하여 모듈레이터에 적용하여 시험한 내용을 보이고자 한다.

• Tribology and Lubricants
• /
• v.11 no.2
• /
• pp.56-62
• /
• 1995

The anisotropic pressure distribution of the hydrodynamic bearing may generate the unstable vibration phenomenon over a certain speed. These vibrations, known as whirl, whip or rotor instability, cannot be sustained over a wide range of rotational spees. Besides these vibrations not only perturb the normal operation of a rotating machine, but may also cause serious damage to the machinery system. And, it is really impossible to change one parameter without changing others, or difficult to fabricate the modified non-circular type bearing, with all the other cures used just now, In this study, hybrid bearing with magnetic exciter is designed for stability improvement of hydrodynamic bearing rotor system without changing mechanical parameters. For stability study, eigenvalue study of the bearing-rotor system is executed by finite element method and results of analyses and experiments show the possibilities of the stability improvement of the hydrodynamic bearing system by using the electricmagnetic force.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.120-132
• /
• 2006

Seismic safety evaluation of concrete gravity dams is very important because failure of concrete gravity dam may incur huge loss of life and properties around the dam as well as damage to dam structure itself. Recently, there has been growing much concerns about earthquake resistance or seismic safety of existing concrete gravity darns designed before current seismic design provisions were implemented. This research develops the dynamic fluid pressure calculation using 'added mass simulation'. The actual analysis using structural analysis package was performed. According to the analysis results, the vibration which is transverse to water flow seems to be very critical depending on the shape of the dam.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.63.1-63.1
• /
• 2010

수중구조물에 의한 파랑의 변형을 예측하기 위해 3차원 수치모형을 도입하여 수치모형 실험을 수행하였다. 본 수치모형은 Navier-Stokes 방정식을 유한차분법을 이용하여 계산하는 동수압 모형으로서, 난류의 해석을 위해서 상대적으로 큰 에디(eddy)만을 고려하는 SANS(Spatially Averaged Navier-Stokes) 방정식의 해를 구하는 LES(large-eddy-simulation) 기반의 수치모형이다. 엇갈림 격자체계에서 유한차분법을 사용하여 지배방정식을 해석하는 모형으로서 수치기법으로 Two Step projection 기법을 사용하여 SANS 방정식을 계산하였으며, Bi-CGSTAB 기법을 이용하여 Poisson 방정식의 해를 구하고 압력장을 계산하였다. 또한, 자유수면의 추적을 위하여 2차 정확도의 VOF(volume-of-fluid) 기법을 사용하였다. 먼저 선형파를 일정 수심상에서 조파시켜 해석해와 비교한 후 수중구조물이 설치된 지형에 적용하여 파랑의 변형을 수치모의하여 수리모형 실험 결과와 비교 및 분석하였다.

• Journal of Yeungnam Medical Science
• /
• v.5 no.2
• /
• pp.59-69
• /
• 1988

This study was designed to investigate the effect of substitution of strontium for calcium on mechanical activity in isolated perfused spontaneously beating rat hearts. The mechanical activity of the hearts of Langendorff's preparation in conditions of low calcium and strontium-substitution for calcium was compared. The effect of norepinephrine and verapamil were also observed in those conditions. The results were as follows : 1. In low calcium, the mechanical activity of the heart preparation was significantly reduced, but when the equimolar strontium was substituted for the reduced calcium, the activity was kept at similar level to the normal condition. 2. When equimolar strontium was substituted for the total calcium in perfusate, the heart preparation stopped its beating, and it was not restored in spite of reperfusion with normal calcium perfusate. 3. Norepinephrine-induced positive inotropic effect was inhibited in low-calcium condition especially with low concentration of norepinephrine, but not in strontium-substitution for calcium. 4. Verapamil reduced the activity of the heart both in low-calcium and strontium-substitution as well as in normal calcium conditions. From above results, it was concluded that strontium served as a substitute of calcium in maintaining mechanical activity and in responsiveness to norepinephrine, and the influx of strontium through cell membrane is inhibited by verapamil as the influx of calcium.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3950-3960
• /
• 2014

In this study, the drag forces on a submerged square cylinder were analyzed using a three dimensional hydrodynamic model. The numerical results were compared with the experimental results to check the reliability of the numerical simulations, and the characteristics of the drag forces with the relative depths were analyzed by analyzing the pressure acting on the cylinder surface, which are normally difficult to measure experimentally. The numerical results showed that the drag forces acting on a submerged square cylinder originate mainly from the pressure forces, and component of the shear forces decreased with increasing relative depth. The pressure coefficient distributions showed that in the case of a low relative depth, a relatively high pressure was formed in the front of a cylinder, and a relatively low pressure was formed in the rear, which gives a high drag coefficient. In a high relative depth, the pressure in the front decreased and pressure in the rear increased, which is a similar phenomenon to that normally observed in two dimensional square cylinder flow. The effect of the static pressure was analyzed and the surface elevation difference between the front and rear zone of a cylinder has a limited effect on the drag forces. Finally, the numerical results showed that the drag forces acting on a submerged square are dominated by the dynamic pressure formed by three dimensional flow and the distribution of local surface elevation.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.3
• /
• pp.20-24
• /
• 2006

Air balancer is a conveyance cargo-handling machine, used in assembly and process lines of car and machining industries. This can lift up an object, the weight of which is from 5 to 200 kg, and moves it to a position. As industrial technologies evolve, it is required to move an object and fit it into a specified position with greater accuracy, rather than performing simple tasks such as lifting objects up and down as conventional ones do. There is also a demand to handle an object with one hand, rather than with two hands,. Through designs of manifold unit for an air balancer function, pilot regulator unit to keep pressure constant, hand unit for an accurate load perception function, and air balancer circuit, this study enables everybody to work it with ease and convenience. Experiments and comparisons were conducted for the performance evaluation of the circuit.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.3
• /
• pp.14-19
• /
• 2006

Recently, the cylinder of the excavator is applied in the various environment. So, we need the development of the simulator for the excavator. The simulator has the effects of the decrease of the cost and improvement of the cylinder's performance. In this paper, we design the simulator for the excavator and makes an analysis of the dynamics and structure. The simulator was applied to the excavator's models of 10ton, 20ton and 30ton because we built the data base of a real excavator's cylinder of information in the experiment. And we used the FEM analysis for the comparative study on the characteristics.