• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.477-479
• /
• 1998

인터넷상에서의 다자간 회의는 수천명의 참가하는 대규모의 회의가 될 수 있으므로 다자간 회의 시스템에서는 확장성이 중요하다. 현재의 인터넷상에서의 다자간 회의 시스템은 대부분 RTP/RTCP를 이용하는데. RTCP를 이용한 피드백 정보 전송의 빈도 수와 전송 시간의 동기화 현상이 다자간 회의 시스템의 확장성에 큰 영향을 준다. 즉, 세션 참가자 수가 증가함에 따라 네트워크에 전송되는 RTCP 패킷의 숫자가 기하급수적으로 증가하게 된다. 피드백 정보의 전송 빈도 수 감소와 동기화 현상을 방지하기 위해 도입한 무작위 지연기법은 너무 단순하여 수많은 참가자들이 동시에 피드백 정보를 교환할 때에 피드백 정보 전송시간의 동기화 현상을 피하지 못해 네트워크에 혼잡 상태를 유발할 수 있다. 이러한 혼잡을 예방하기 위한 기존의 RTP/RTCP 확장 기법의 피드백 정보 전송지연은 송신자가 수신자의네트워크 상태에 따라 효율적으로 전송을 제어할 수 없게 한다. 본 논문에서는 RTP/RTCP 확장성을 증가시키는 기존의 기법들의 성능을 평가하고, 확장성 증가와 동시에 성능이 향상된 RTP/RTCP 확장 기법을 제안한다. 본 논문에서는 확장성 증가와 피드백 지연 정도를 줄이기 위해 빠른 제고 기법을 제안한다. 빠른 재고 기법은 두가지 세부 기법으로 나누어지는데, 첫째는 네트워크의 상태의 변화에 따라 RTCP피드백 정보의 전송지연 정도를 조절하는 것이고, 둘째는 무작위 지연을 선택적으로 조정하려 피드백 정보를 오랜 기간 동안에 보내지 못한 참가자에게 우선권을 주는 것이다. 본 논문에서는 시뮬레이션을 통해 제안된 확장성 기법을 이용할 때에 기존 방식에 비해 거의 비슷한 확장성을 보이면서도 초기 RTCP패킷 전송지연이 50%정도 감소함을 보여준다.구현되고 있다.팔일 전송 기법을 각각 제시하고 실험을 통해 이들의 특성을 비교분석하였다.미에서 uronic acid 함량이 두 배 이상으로 나타났다. 흑미의 uronic acid 함량이 가장 많이 용출된 분획은 sodium hydroxide 부분으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)이 각각 가장 낮았다. 2. 사산(死産)과 초생아사망(初生兒死亡)을 구분(區分)하여 고려해

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.20-26
• /
• 2001

In this paper, the charge pump PLL using the dual PFD to improve the trade-off between acquisition behavior and locked behavior is proposed. This dual PFD consists of a positive edge triggered PFD and a negative edge triggered PFD. The proposed charge pump shows that it is possible to overcome the issue of the charge pump current imsmatch by the current subtraction circuit. Also, this charge pump can suppress reference spurs and disturbance of the VCO control voltage. The proposed charge pump PLL is simulated by SPICE using 0.25${\mu}m$ CMOS process parameters.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.1
• /
• pp.56-64
• /
• 2010

A system design has been conducted of the liquid rocket engine for Korean launch vehicle (KSLV-II, Korea Space Launch Vehicle II). The present turbopump-fed liquid rocket engine of vacuum thrust 76 ton and vacuum specific impulse 297 sec adopts gas generator cycle. The combustion pressure of the regeneratively cooled combustor is 60 bar. The propellant is LOx/kerosene. The engine is started by pyrostarter and the combustor is ignited by TEA (TriEthylAluminium). The engine system performance and the subsystems performance requirements are given through energy balance analysis. The combustion pressure, specific impulse and the engine mass are analyzed to be reasonable comparing with the published data. The startup analysis method which will be used in the future has been validated against the turbopump-gas generator coupled test. The tuning method for performance variation of the engine which is not actively controled has been prepared by mode analysis and performance deviation analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.307-313
• /
• 2019

The traveling wave tube amplifier (TWTA), which can be applied to the Ka-band millimeter-wave multi-mode seeker, consists of an high voltage power supply(HVPS), a grid modulator, a command and control, and an RF assembly. We designed a power supply that generates a -17.9 kV high voltage by synchronizing the pulse repetition frequency(PRF) and power supply switching frequency(i.e. synchronization frequency), and a high-speed grid-switching modulator for RF pulse modulation. The TWTA, which is fabricated through miniaturization with a volume of 3.18 L, has high pulse switching characteristics of up to 18.5 ns. The maximum rise/fall time of the grid on/bias signal and peak power is more than 564.9 W. Moreover, an excellent spurious performance of -68.4 dBc or less was confirmed within the range of PRF and PRF/2.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.703-710
• /
• 2004

WebDAV is a protocol to support collaboration among one or more groups in geographically distant locations through the internet. WebDAV extends the web communication protocol HTTP/1.1 to provide a standard infrastructure for .supporting asynchronous collaboration for various contents across the internet. A WebDAV client uses HTTP requests to perform a renewal and update action to the resources in WebDAY servers. So, it is desirable that the client supports the ability of authoring and version management with a good concurrency control and property management. In this paper, to enhance usability, we developed a .NET-based WebDAV client with a user interface similar to the Windows Explorer. The developed WebDAV client supports easy launching of the authoring application and appropriate lock control for the server resources. In addition, through the functionality of process monitoring, it supports automatic update of the server resources when the modification of the resources are completed by the user. The WebDAY client is a .NET-based application written in the C＃ language, running on any platform supporting a .NET framework.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.63-68
• /
• 2009

The power management integrated circuit(PMIC) for CCD image sensor is presented in this study. A CCD image sensor is very sensitive against temperature. The temperature, that is heat, is generally generated by the PMIC with low efficiency. Since the generated heat influences performance of CCD image sensor, it should be minimized by using a PMIC which has a high efficiency. In order to develop the PMIC with high efficiency, the input stage is designed with synchronous type step down DC-DC converter. The operating range of the converter is from 5V to 15V and the converter is controlled using PWM method. The PWM control circuit consists of a saw-tooth generator, a band-gap reference circuit, an error amplifier and a comparator circuit. The saw-tooth generator is designed with 1.2MHz oscillation frequency. The comparator is designed with the two stages OP Amp. And the error amplifier has 40dB DC gain and $77^{\circ}$ phase margin. The output of the step down converter is connected to input stage of the charge pump. The output of the charge pump is connected to input of the LDO which is the output stage of the PMIC. Finally, the PMIC, based on the PWM control circuit and the charge pump and the LDO, has output voltage of 15V, -7.5V, 3.3V and 5V. The PMIC is designed with a 0.35um process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.919-926
• /
• 2013

Experiments were conducted to determine the operating characteristics of a small-scale ORC (organic Rankine cycle) system for various low-temperature heat sources. A small-scale ORC power generation system adopting R-245fa as a working fluid was designed and manufactured. Hot water was used as the heat source, and the temperature was controlled using 110-kW electric resistance heaters that provided temperatures of up to $150^{\circ}C$. An open-drive oil-free scroll expander directly connected to a synchronous generator was installed in the ORC unit. Experiments were conducted by varying the rotational speed of the expander under the same heat source temperature conditions. The factors that influence the performance of the small-scale ORC system were analyzed and discussed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.10-19
• /
• 2001

In this paper, we propose an effective but simple multi-rate parallel interference canceller(PIC) for the international mobile telecommunications-2000(IMT-2000) 3rd generation partnership project (3GPP) system. For effective multi-rate processing, we define the basic block as one symbol period of the dedicated physical control channel(DPCCH) having the lowest data rate and common to all users. Then, decision and interference cancellation are performed at every basic block. For an asynchronous channel, we propose an advance removal scheme that removes in advance multiple access interference(MAI) due to the next blockof other users with shorter delay. Introducing a pipeline structure at a sample base, we can implement efficiently the PIC using the advance removal scheme with a minimum hardware and no extra computations. Through computer simulations, we analyze the bit error rate(BER) performance of the proposed PIC with respect to signal-to-noise ratio(SNR) and the number of users.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.41-46
• /
• 2012

This paper suggested that the frequency adaptive antenna matching network design between AP and WLAN(Wireless Local Area Network) terminal for improving performance. The internet data service of the WLAN terminal is communicated through the AP and AP broadcasts the beacon signal including the assigned frequency channel. at that time the antenna matching network path is controlled beacon information after the WLAN terminal searching and synchronization a beacon information. and then the WLAN terminal communicate with AP. controlling the antenna matching network path according to channel information, The WLAN terminal is expected to improve RF output power and sensitivity performance. The VSWR(Voltage Standing Wave Ratio) performance of the designed antenna matching network is measured to about 1.1 ~ 1.2 and then it is operated by the channel information of the AP.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.9
• /
• pp.469-478
• /
• 2001

It is difficult to test a distributed system because of the task of controlling concurrent events,. Existing works do not propose the test sequence generation algorithm in a formal way and the amount of message is large due to synchronization. In this paper, we propose a formal test sequence generation algorithm using logical clock to control concurrent events. It can solve the control-observation problem and makes the test results reproducible. It also provides a generic solution such that the algorithm can be used for any possible communication paradigm. In distributed test, the number of channels among the testers increases non-linearly with the number of distributed objects. We propose a new remote test architecture for solving this problem. SDL Tool is used to verify the correctness of the proposed algorithm and it is applied to the message exchange for the establishment of Q.2971 point-to-multipoint call/connection as a case study.