• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.65-69
• /
• 1997

Generally, we often use a speed sensor based on a rotary encoder and we can obtain a speed information by counting the increased or decreased number of encoder pulses in a sampling period. However, these speed measurement systems do not inherently produce a true, instantaneous speed information and them the speed ripple is generated by speed measurement errors. In order to overcome this problem, speed observer is used for the accurate speed measurement and improvement of speed ripple for Permanent Magnet Synchronous Motor (PMSM) in this paper. Speed observer estimates the instantaneous speed at each sampling instant. This estimated speed signal is then used as the speed feedback signal for the speed loop control. The proposed speed observer system is proved simulation using SABER simulation S/W.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.635-641
• /
• 2016

In many industrial applications that use the electric motors robust controllers are needed. The method using a neural network in order to design a robust controller when a disturbance occurs is studied. Backpropagation algorithm, which is used in a conventional neural network controller is used in many areas, but when the number of neurons in the input layer, hidden layer and output layer of the neural network increases the processing speed of the learning process is slow. In this paper an adaptive PI(Proportional and Integral) controller based on CTRNN(Continuous Time Recurrent Neural Network) for permanent magnet synchronous motors is presented. By varying the load and the speed the validity of the proposed method is verified through simulation and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.843-844
• /
• 2015

본 논문은 매입형 영구자석 동기모터(IPMSM: Interior Permanent Magnet Synchronous Motor)에서 발생하는 소음의 원인을 유추하고 해석적, 실험적 방법을 통하여 소음을 평가한다. 또한 비교 모델의 실험을 수행하여 측정된 데이터에 따른 소음 값을 비교 분석한다. 대상 모델은 12극 18슬롯이고 슬롯 오픈의 유무에 따른 주파수 분석 및 소음을 측정하였다. 기존 전동기와 비교 모델 전동기의 소음 결과를 분석하였고 슬롯 오픈 유무에 따라 소음이 발생하는 것을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.578-580
• /
• 2005

This paper proposes the algorithm for the initial pole-position estimation of a surface PM-LSM, which is carried out under the pseudo-position control with-out a pole sensor and is insensitive to the motor parameters. This algorithm is based on the principle that the initial pole-position is calculated by the reverse trigonometric-function using the two reference currents, which are informed from the speed controller. The effectiveness of the proposed algorithm is confirmed by the arithmetical analysis and the experiment. IPP is well estimated within a satisfied moving-distance and a shorter estimation taken-time even if large disturbance such as cogging and friction are existed.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.568-574
• /
• 2017

This paper proposes a demagnetization fault diagnosis method for interior permanent magnet synchronous motors(IPMSMs). In particular, a demagnetization fault is one of the most frequent electrical faults in IPMSMs. This paper proposes an estimation method for permanent magnet flux. The method is based on linear interpolation. The effectiveness of the proposed method for diagnose demagnetization faults is verified through various operating conditions by finite element simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.393-396
• /
• 2001

This paper presents the sensorless control technique with cost competitive phase currents detection for PMSM drives. The phase currents are detected by two methods : one is from the do link current, another is from the currents of the lower legs of the inverter switches. The sensorless control with the phase currents dectection is implemented with DSP. It is verified through the experiment that the estimated rotor position tracks the real rotor position at the low speeds and high speeds operation with flux weakening.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1080-1082
• /
• 2005

This paper presents the system design of permanent magnet linear synchronous machine with double-side PM mover and slotless iron-cored stator in the required speed and thrust. in this paper, the design of manufacturing motor is optimized by characteristics of motor parameters with the variation of PM size and coil turns. And, the permissible operating range of manufactured motor by determination of base speed and base thrust according to switching scheme of DC link voltage are offered. Finally, the results of analytical solutions are verificated by finite element analysis and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.78-80
• /
• 2001

This paper deals with a comparison between the secondary Halbach array and conventional array of permanent magnets(PMs) in air-core type linear synchronous motor(LSM). Two types of PMLSM are analyzed and compared, with reference to the following parameters as variables: magnetic field, thrust and back emf.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1273-1275
• /
• 2005

This paper presents design of speed control system for slot less iron-cored PM linear synchronous motor using space vector PWM. the design must be considered by the useable limits of the DC link voltage and dynamic operating rage as well as the characteristics of design parameters in a point of system. Therefore, in this paper, the permissible operating range of manufactured motor by determination of rate speed and rate thrust according to switching scheme of DC link voltage are offered. The vector control requires information about rotor position. And we can need to the Hall sensor for sampling current. In order to agree with this purpose, Digital Signal Processor(TMS320F240x) developed for implementation of a speed Field Oriented Control.

• 전력전자학회논문지
• /
• 제4권5호
• /
• pp.433-441
• /
• 1999

본 논문에서는 기존 축전지를 대체하기 위한 초전도 플라이휠 에너지 저장시스템에 관해 연구 하였다. 전동/발전기, 베어링, 휠재료, 전력변환기등의 설계요소에 관해 기술하였으며 초고속의 회생 및 저장 모드에서 모터입력전류를 정현파로 제어하기 위한 전력변환기를 설계 제작하였다. 높은 보자력을 갖는 희토류 영구자석을 사용하여 계자를 구성하는 원통형 영구자석 동기전동기를 사용함으로써 고효율을 실현하고자 하였다. 기계적 베어링과 초전도 자기부상 베어링을 사용하는 시스템에 적용하여 운전하였으며 후자의 경우 약 10.000[rpm]에서 매우 안정된 회전 특성을 보였으며 전자의 경우 설계 특성을 만족하면서 7.000[rpm]에서 100[V]의 일정 직류전압으로 약 25초 동안 400[W]의 전력을 회생하였다.