• Journal of the Korea Concrete Institute
• /
• v.13 no.5
• /
• pp.484-490
• /
• 2001

This study focused on the investigation of durability of latex modified concrete in the points of chloride ion permeability and freeze-thaw resistance as latex content variated such as 5%, 10%, 15% and 20%. When latex was mixed in concrete and cured, the concrete consisted of hydrated cement and aggregate interconnected by a film of latex particles. An increasing the amount of latex produced concrete with increased flexural strength, but with slightly lower compressive strength. The increase in flexural strength might be attributed to the latex films between the hydrated cement and aggregates, and the decrease in compressive strength to the flexibility of the latex component named by Butadiene. The rapid chloride permeability test was used to evaluate the relative permeability of latex-modified concretes and conventional concretes. The results showed that the permeability of latex-modified concretes was considerably lower than conventional concretes tested, which might be due to the latex filled in voids and interconnections of hydrated cement and aggregates by a film of latex particles. The freeze-thaw resistance of LMC was quite good comparing to conventional concrete. Air entraining agent has been used in conventional concrete to improve the freeze/thaw resistance, but latex modified concrete does not need additional air entraining agent for freeze-thaw resistance provided adequate cure occurs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.49-58
• /
• 2017

The phenomena that we experience in everyday life such as snow, rain, wind, and temperature are referred to as weather, and the average state of atmospheric phenomena that occur over a long period of time in a specific region is referred to as climate. In addition, significant variation of climate compared to the average state is referred to as climate change. Concrete structures can have various problems when exposed to elements. Among the problems, the freeze-thaw problem due to extreme climatic factors such as heavy rain and snowfall has become a particularly significant issue recently. The concrete that has been subjected to repeated freeze-thaw rather than too high or low temperature shows serious degradation of durability, and the performance of structures with degraded performance is difficult to recover. Therefore, in this study, concrete durability performance with respect to freeze-thaw from curing conditions change due to wind speed and sunshine exposure time. Concrete freeze-thaw experiment are performed. using wind speed and sunlight exposure time. Also, performance based evaluation through the satisfaction curve based on the freeze-thaw test results are performed.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.5
• /
• pp.37-46
• /
• 2016

In order to determine the variability of environmental characteristics of lightweight air-foamed soil using marine clay according to freezing-thawing and soaking conditions, unconfined compressive strength of the lightweight air-foamed soil samples made by changing the amount of cement under curing conditions of outdoor low temperature, underground or indoor wetting were observed. Compressive strength was not increased under freezing-thawing (temperature range of $-9.1^{\circ}C{\sim}17.2^{\circ}C$) regardless of the amount of cement but the more cement using, it was increased rapidly by underground curing conditions within 30 cm beneath ground level. Therefore, it is necessary to install insulation layer cutting off exterior cold air after construction of lightweight air-foamed soil in condition of freezing-thawing. Bulk density was increased too small under the long-time soaking condition, it tended to decrease rapidly when samples were dried up and had below 6% of water contents. But variability of compressive strength and bulk density was very small for preventing drying and keeping its wet state. The lightweight air-foamed soil that installed beneath ground water level or covered by soil can be evaluated as a long-term reliable construction material.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.86-94
• /
• 2020

When the Superabsorbent Polymer (SAP) is added into concrete, the slump decreases rapidly, deteriorating the workability, the internal curing effect can be obtained through the water absorption and discharge process, and the internal voids of the concrete are increased. In this study, the effects of internal curing and voids were evaluated by evaluating the compressive strength, freeze-thaw resistance, and chloride penetration resistance of SAP-adding concrete that secured workability using a water reducing agent. Also, the internal curing effect of SAP was evaluated by dividing the curing conditions of concrete into water curing and sealed curing. From the result, as the SAP adding ratio increased, the amount of water reducing agent increased, and as for the compressive strength, the SAP adding ratio of 1.5% showed the greatest compressive strength. In particular, in the case of sealed curing showed higher compressive strength than the water curing. It is considered that the compressive strength increased due to the reduction of the effective water-cement ratio and the internal curing effect. Adding 1.0~1.5% of SAP improved the freeze-thaw resistance similar to the case of adding the AE agent, and the addition of more than 1.0% of SAP improved the chloride penetration resistance. The optimal adding ratio of SAP is 1.5%, and the adding ratio of 2.0% or more adversely affects the compressive strength and freeze-thaw resistance.

• Korean Journal of Animal Reproduction
• /
• v.20 no.1
• /
• pp.35-42
• /
• 1996

This study was carried out to investigate the effect of straw loading method and thawing protocol on the in vitro development of in vitro produced mouse blastocysts cryopreserved by vitrification. Three loading types of straw I, Il and III on loading and sealing method were made for vitrification. The ability of the solution on straw loading methods to remain vitreous during warming was tested by exposed in air for 1 to 10 s sec. and then plunged the vitrified straws into water bath at 25°C. Embryos to be vitrified were equilibrated to the 20% EG for 5min. and exposed in EFS 40 for 1min. The plug ends of Straw I and Straw II were sealed with straw powder and Straw III was treated straw powder, followed by heat sealing and then plunged into LN$_2$. The results obtained in these experiments were summarized as follows; 1) Straw I embryo column mostly changed from transparent to opaque upon thawing without exposure in air for 3-6 sec. Straw II embryo column was I improved partially but was not remained completely vitreous during warming. However, when Straw lll loading method was used, the embryo column was remained vitreous completely. 2) High survival rates and development rates of each groups (middle blastocysts and hatching blastocysts) of vitrified embryos were obtained by using Straw III loading method than Straw I method (P<0.05). And the range of s standard error was low in Straw lll method. 3) When the embryos vitrified-frozen were placed in air for 3, 5 and l0sec. and then warmed rapidly in water bath at 25$^{\circ}C$, the survival rates after 24h of culture were 72.7-87.1% and the development rates to hatching stage after 48h of culture were 34.0-48.4%. There were no significantly differences according to exposure time in air during warming. In conclusion, the present results showed that highly survival and low standard error of vitrified-frozen mouse bIastocysts were obtained by using straw lll loading, double sealing and appropriate 2 step warming method.

• Reproductive and Developmental Biology
• /
• v.36 no.3
• /
• pp.199-206
• /
• 2012

Cryopreservation induces sublethal damage to the spermatozoa, which leads to their reduced fertile life. This study was designed to determine effect of glycerol and ethylene glycol as cryoprotectant in extender on improve the freezability of Jeju horse semen. The semen was cryopreserved with glucose-EDTA extender containing each 5% glycerol, 5% ethylene glycol, 8% glycerol or 8% ethylene glycol, respectively. Post-thawed sperm were evaluated motility, viability, Membrane integrity and acrosome integrity. Post-thawed sperm motility were not significantly differences among treatments. However, sperm viability were significantly higher (p<0.05) in 8% glycerol ($39.85%{\pm}11.41$) than in 5% glycerol treatment ($18.08%{\pm}1.61$). In membrane integrity, swelling sperm ratio was significantly higher (p<0.05) in 8% glycerol ($34.12%{\pm}11.02$) than other treatments. In the percentage of capacitated sperm assessed by CTC staining, F pattern was significantly higher in 8% ethylene glycol than 5% glycerol and 5% ethylene glycol (p<0.05). B pattern ratio was significantly increased in 5% ethylene glycol compared with 8% glcerol and 8% ethylene glycol (p<0.05). Moreover, 8% ethylene glycol treatment was significantly decreased AR pattern ratio compared with other treatments (p<0.05). It is concluded that treatment of 8% glycerol was improved the sperm viability and 8% ethylene glycol was improved the sperm ascrosome integrity after thawing. However, they were not significantly difference between 8% glycerol and 8% ethylene glycol on post-thawed sperm viability. Therefore, 8% ethylene glycol was more effective sperm cryoprotectant than 8% glycerol in Jeju Horse.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.129-135
• /
• 2013

Recently, waste water treatment system is developed in small and middle size to get more economic advantage. Freeze concentration system has high thermodynamic efficiency and low energy consumption, can re-use purified water and cold energy obtained from ice. This study was experimentally performed to investigate pollution containment in frozen layer by cooling wall temperature, air-bubble flow methods, initial ice-lining thickness of frozen layer in NaCl aqueous solution and the representative heavy metals, Pb and Cr aqueous solution. As the result, a decrease in the cooling wall temperature bring a higher growth rate of ice front and the more solute was involved in frozen layer. The method to inject directly air-bubble into ice-liquid interface through ring shape nozzle gave high purity of ice compared to indirect method. Ice lining in 5mm thickness resulted in frozen layer with higher purity than 1mm thickness.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.25-25
• /
• 2003

본 연구는 돼지 동결-융해 정자의 배양에 의한 체외수정능력과 glycosidase activity의 관계를 검토하였으며, 또한 돼지난자의 투명대내에서 발견된 당잔기에 대한 정자의 glycosidase 특이성을 확인하기 위하여 $\alpha$-L-fucosidase, $\alpha$-D-mannosidase, $\beta$-D-galactosidase 및 N-acetyl-$\beta$-D-glucosaminidase ($\beta$-GlcNAc'ase)의 activity를 분석하였다. 그 결과 glycosidase activity는 동결정자의 융해 후 배양하지 않았을 때보다 2시간 배양했을 때 더 높게 나타났다. $\beta$-GlcNAc'ase의 activity는 정자 배양 유무에 관계없이 다른 glycosidase 처리시보다 최소한 2배 이상 높게 나타났다. 또한 첨체반응이 유기된 정자의 비율은 glycosidase ($\alpha$-D-mannosidase; P<0.05)에 의해 영향을 받았으며 정자를 배양하지 않은 경우보다는 배양된 정자에서 높게 나타났다. 그러나 배양시간에 따른 정자의 생존성에 대해 glycosidase의 종류에 따른 유의차는 인정되지 않았다. 한편 투명대내 정자의 접착과 침입에 대한 또 다른 실험에서, 서로 다른 glycosidase가 첨가된 배양액내에서 수정된 정자가 배양시간이 길어짐에 따라 정자의 침입율은 낮아졌다($\beta$-GlcNAc'ase; P<0.05). 투명대내의 정자접착 정도는 glycosidase의 첨가시에 무첨가시보다 접착정도가 더 높았으며, 가장 높은 접착율은 $\beta$-GlcNAc'ase첨가시 나타났다. 또한 모든 glycosidase 처리시 2시간 배양한 정자보다는 배양하지 않은 정자에서 투명대에 대한 접착정도가 높게 나타났으며, $\alpha$-D-mannosidase의 처리시 유의적인 차이를 보였다(P<0.05). 본 연구의 결과, $\beta$-GlcNAc'ase가 주로 돼지정자의 원형질막내에 존재하는 것으로 추측되며, 배양된 정자에 의한 투명대 접착정도와 침입율이 낮았음에도 불구하고 glycosidase activity가 증가하는 것으로 나타났다

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.2
• /
• pp.129-134
• /
• 1998

The objective of this study was to test whether the developmental capacity of human multi-pronuclear (PN) zygotes after ultra-rapid freezing using EM grid can be maintained. For this experiment, multi-PN zygotes which produced in human IVF program were used as an alternatives of normal 2PN zygotes, and they were separated into 3PN or $\geq4PN$ zygotes to compare their in vitro development and cryoinjury according to PN number. As freezing solution, EFS30 which consisted of 30% ethylene glycol, 18% bcoll, 0.5 M sucrose and 10% FBS added D-PBS was used. The result obtained in this experiment was summarized as follows; When the multi..PN zygotes were ultrarapidly frozen and thawed, the high mean percentages (85.5%) were survived. Also when the cleavage rates between control and freezing group were compared with PN number, there were not significantly different in each group (3PN; 81.3% & 85.4% and $\geq4PN$; 90.0% & 95.7%). When the in vitro development rates after thawing were examined, freezing 3PN group (22.0%) was not differed to control 3PN group (38.5%), although the development result of freezing $\geq4PN$ group (45%) was significantly lower than that of control $\geq4PN$ group (44.4%) (p<0.05). These results demonstrate that developmental capacity of human zygote can be obtained by ultra-rapid freezing method using EM grid and EFS30.

• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.215-224
• /
• 2003

Weathering in nature was simulated by freeze-thaw cyclic test which represents mechanical weathering. Measured physical properties were elastic wave velocities, absorption rate, volume change and weight change. Uniaxial compression tests were also conducted before and after the weathering tests. The change in weight and volume of the specimens were not clearly related to the weathering process, but P, S wave velocities, uniaxial compression strength and Young's modulus were clearly decreased as weathering progresses. Test result can be used for the assessment of long-term stability of rock slopes.