• The Korean Journal of Mycology
• /
• 제33권2호
• /
• pp.98-102
• /
• 2005

In 2003 to 2005, the root rot of Japanese angelica (Aralia elata) was surveyed in nursery beds of Korea, where incidence of the disease often reached up to 100%. Three isolates were obtained from the infected roots, and identified as Phytophthora cactorum on the basis of cultural, morphological characteristics and molecular analysis. The isolates were characterized by having markedly papillate and broadly ovoid deciduous sporangia. The optimum temperature for mycelium growth was at $25^{\circ}C$ on V8 juice agar. Pathogenicity of the isolates was confirmed by soil mixture inoculation. Approximately 900 bp of ITS rDNA was amplified from all 3 isolates and band pattern of restriction fragments observed by Alu I, Msp I, and Taq I digestion also supported the result of the morphological identification when compared with PhytID database.

• Journal of the Korea Society of Computer and Information
• /
• 제24권12호
• /
• pp.101-108
• /
• 2019

The purpose of this study was to investigate the subjective evaluation and the characteristics of each type of maternal self-awareness. It was to provide the basic data necessary for the development of clothing that can improve the satisfaction of the body shape of pregnant women. This study was conducted with Q methodology, and was performed for pregnant women over 6 months. Analysis was done with QUANL program. The recognition types of body shape of pregnant women was analyzed as three types: thin limbs and central hemispherical abdominal body shape, under abdomen protruding body shape, and thick upper arm and central abdomen protruding body shape. The thin limbs and central hemispherical abdominal body shape were considered to be normal, with the lowest BMI index before pregnancy. And the limbs were thin and the other parts were not overweight, but recognized that only the belly came out. The under abdomen protruding body shape was overweight with the highest BMI index before pregnancy. In addition to the circumference of the chest and hips, the body was gaining weight and was perceived to have a belly drooping down. The thick upper arm and central abdomen protruding body shape recognized that the middle part of the abdomen protruded like the first type, but it was different from the first type because the upper arm was thickened. In the future study, it would be a meaningful study to compare and analyze the difference with the recognition body of this study through analyzing the actual body shape of pregnant women.

• Journal of Korean Society of Steel Construction
• /
• 제20권6호
• /
• pp.711-722
• /
• 2008

Existing tube for concrete filled tubular structure is made through welding of four plates irrespective of tube thickness, so production performance is poor and special welding technique is needed to weld the internal diaphragm and through the diaphragm. Therefore, through manufacturing by cold forming development of beam to column connections that is no welding in position of stress concentration is needed. In this study the proposal of beam to column connections details and to making tube specimens by method of bending steel plates, we want to know the compositeeffect between internal anchor and concrete by processing on stress distribution and internal force evaluation of concrete filled tube beam to column connections with a variable of flange welding existence between column and beam, welding quantity between column and diaphragm, existence of concrete in tube, column with diaphragm and general column.

• Journal of Korean Society of Steel Construction
• /
• 제28권2호
• /
• pp.75-83
• /
• 2016

Existing tubes for concrete filled tubular structure are made through welding of four plates irrespective, but the production performance is poor and special welding technique is needed to weld the internal or through diaphragm. Accordingly, We developed a welded built-up square steel tube having a welding lines and a stiffeners at location out of stress concentration. The welded built-up square steel tube occurred a interference with stiffeners at the internal or through diaphragm, therefore researches of a external diaphragm for welded built-up square CFT column connections are needed for the purpose of avoidance of a interfere with stiffeners. In this study we suggest a design formulation for external diaphragm of the welded built-up square CFT external diaphragm connections. Four specimens were manufactured for a experimental test, then we analyzed the behaviors of the specimens.

• Korean Journal of Plant Taxonomy
• /
• 제35권2호
• /
• pp.115-127
• /
• 2005

Two anatomical features of leaves, transverse section of midribs and petioles, were examined for nine species of five genera of Thymelaeaceae, Daphne L. -4 spp., Diarthron Turcz. -1 sp., Edgeworthia Meisn. -1 sp., Stellera L. -1 sp., Wikstroemia Endl. -2 sp., using light microscopy and scanning electron microscopy. In terms of shape of upper side, three types were observed, i.e., flattened, depressed, and raised. Outline of petioles is mostly semi-circular or circular in transverse section, with two distinct wings/weakly developed wings or without wings. Other characters besides anatomical features of leaves such as vascular bundle tissues, crystal, tannin are also described in details. Finally, we briefly discussed the systematic significance of the anatomical features of leaves for identification of Korean Thymelaeaceae.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제7권6호
• /
• pp.1271-1276
• /
• 2006

Vertical loads acting on corrugated metal culverts under negative arching condition were investigated through numerical analyses. Four kinds of corrugated metal culverts with span of 3m were considered in numerical analyses. Also, depths of cover were varied from 1m to 6m with increment of 1m. According to numerical analyses, magnitudes of vertical loads acting on culverts under the condition of negative arching were similar as overburden load on culvert. Furthermore, magnitudes of vertical loads acting on culverts supported by pile foundation were similar as those without pile foundation when depths of cover were less than about 2m. For larger depths of cover which are greater than about two times of span of culvert, magnitudes of vertical loads were slightly larger than those without pile foundation and its tendency becomes more clear as flexural rigidity of corrugated metal increases.

• The Korean Journal of Malacology
• /
• 제8권1호
• /
• pp.61-71
• /
• 1992

동양달팽이 (Nesiohelix samarangae)는 동양달팽이속(Nesiohelix)에 속하는 종으로 한국에서 동양？팽이속으로는 유일하게 발견되는 종이다. 본 실험에서는 동양달팽이의 웅성생식기관의 각 부분 즉, 난정소(ovotestis), 양성관(hermaphrodite duct), 수정실(fertilization chamber), 전립선(prostate), 수정관(vas deferens), 상음경(epiphallus), 음경(penis)등의 배열 상태를 관찰하고 이들에 대한 광학현미경적 관찰을 위해 Hematoxylin- Eosin염색과 Mallory 염색을 실시하였다. 난정소(ovotestis)는 많은 수의 선포(acini)로 이루어져 있으며 각 선포는 배상피세포층(germinal epithelial cell layer)과 영양세포(nurse cell), 생식세포(gamete cell)들로 이루어져 있었다. 선포(acini)는 원주상피로 덮여있었다. 양성관(hermaphrodite duct)은 가늘고 긴 관으로 내벽은 섬모입방상피세포와 얇은 결합조직층으로 이루어져 있었으며 내강은 농축된 정자로 가득 차 있었다 . 수정관(fertilization chamber)은 3개의 도관이 결합조직에 의해 둘러싸인 형태로 이루어져 있었다. 도관의 상피세포는 뚜렷한 위중층섬모원주세포로 되어 있었다. 전립선(prostaoe)은 분비기능을 가진 것으로 사료되는 세포들과 실제 분비가 일어나는 실(chamber)로 이루어져 있었으나 다른 염색법 또는 전자현미경적 관찰에 의해 다른 구조들의 존재유무를 확인 해야할 것으로 사료된다. 실(chamber)은 분비포로 보이는 세포들과 접해 있었다. 수정관(vas deferens)은 결합조직으로 이루어진 근육질의 두꺼운 벽을 가지고 있었으며 내강은 돌출부위에 의해 4부분으로 갈라져 있었다. 내강에 연한 상피는 원주세포로 되어 있었다. 상음경(epiphallus)의 벽은 근섬유 다발은 벽의 외곽으로 갈수록 밀도가 높아졌다. 상부에 내강과 연결되는 함입구조(groove)를 가지며, 내강에 연한 상피는 섬모가 없는 원주세포로 이루어져 있었다. 음경(penis)은 근섬유가 산재된 두꺼운 벽을 가졌으며 상음경보다 굵은 원통형이었다. 내강은 많은 돌출부에 의해 복잡하게 나뉘어 있으며 상피세포는 원주 세포로 이루어져 있었고 섬모는 관찰되지 않았다. 내강 내의 분비물과 세포의 형태로 보아 내강상피세포는 분비기능을 가진 것으로 사료된다.

• Applied Chemistry for Engineering
• /
• 제19권2호
• /
• pp.161-167
• /
• 2008

Multi-walled carbon nanotubes (MWCNT)-reinforced poly(ethylene-co-ethyl acrylate) (EEA) nanocomposites were prepared by both melt and solution mixing methods. The mechanical, thermal, and electrical properties were investigated as a function of type and loading of CNT. The tensile strength and modulus increased, while elongation at break decreased with increasing MWCNT content. The hollow-type MWCNT showed an improved tensile strength and elongation at break compared with a conventional MWCNT. The thermal degradation temperature was increased by around $40^{\circ}C$ with increasing the amount of MWCNT. The melt-mixed composites showed the highest volume resistivity. In the case of solution-mixed composites, the conventional MWCNT was estimated to show much lower volume resistivity than that of hollow MWCNT. The number and length of extruded CNT onto the fractured surface increased by both increasing the content of CNT and employing the tensile strain to the sample. The melt-mixed specimens showed much smaller number and shorter length of extruded CNT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제20권4호
• /
• pp.534-544
• /
• 2019

Because the pile-bent of IPM Bridge is projected from the soil surface, excessive displacement of abutment can be induced. According to design guide of IPM Bridge, the shape of the bridges used in this study was applied to the maximum applicable 120.0m span, 30-degree for skew angle, and 10.0m for the protruded pile-bent height. The maximum displacement by the maximum span application condition of the IPM Bridge was calculated using this bridge model, and the safety of a horizontal displacement of the IPM Bridge was investigated based on the allowable displacement presented by Bozozuk. The maximum horizontal displacement of the IPM Bridge was calculated to be larger in the winter shrinkage condition than in the summer expansion condition, the horizontal displacements were more affected by the length of a bridge than by the skew angle. And the vertical displacement was not affected by the skew angle and length. As the span increases, the horizontal displacement increases significantly, the horizontal displacement at 120.0m span length was found to exceed the allowable displacement proposed by Bozozuk. However, the moment generated in the pile-bent did not exceed the plastic moment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제16권8호
• /
• pp.5673-5682
• /
• 2015

Purpose of this study is to examine and investigate the utilization of low-rise floor Pilotis space which is frequently selected as a major planning element in recent high-rise apartment complex and to identify the interrelationship between the placement of Pilotis space in the complex and space utilization frequency by comparing circulation related indicators of Connectivity, Control Value, Global Integration and Local Integration through Space Syntax axial analysis. Conclusions of this study are, first, Pilotis space is not used as a space to improve regional community consciousness because it is mostly used as a 'simple movement space'. Second, regarding space utilization frequency differences in Pilotis space in each apartment building, projecting entry access+pilotis addition type complex shows more significant utilization frequency than pilotis access type complex, and the vandalism phenomenon is observed more often. Third, Pilotis space utilization is related with Connectivity, Control Value, Global Integration and Local Integration which are circulation related indicators in Space Syntax, and Pilotis spaces with high indicator values over 2 tend to show higher utilization frequency and those with low indicator values over 2 tend to show low utilization frequency.